[Repeater-Builder] Thanks guys

I don't think I have said thanks recently to Eric Lemmon, Al Wolfe, Skipp, RS Gilmore, and to anyone else I,ve got info from. I,m still tring to get bigger with my system. I found that going with more simplicity is better than ellaborate in my system anyway. Thanks again to all. Bruce KD4BOH.

[Repeater-Builder] Rx Combiner

Anybody got a good idea for building a combiner for UHF receivers. Need to put 4 Rx on one antenna. Thanks, Bruce. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to:

[Repeater-Builder] C3I audio delay board

I have a C3I audio connected to a Cat 300dx. As you increase the delay there a hiss that is heard. If you turn the delay off, the hiss is silent. Any Ideas? thanks, Bruce KD4BOH. Yahoo! Groups Links * To visit your group on the web, go to:

[Repeater-Builder] Time-Out-Timer Length

Does anyone know how to lengthen a TLN 1361A T.O.T. from Motorola? The one I have is 1 minute, I need it to do 10-15 minutes. Thanks, Bruce KD4BOH. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this

[Repeater-Builder] uhf Micor 450-470 lowering freq.

How far can you move a micor 450-470 down? I moved one to 444.000 Mhz. I put a 6pf cap. across L101 on Rx to increase sensativty. I need to tune one to 442.675 on Rx, Not worried about Tx. Bruce, KD4BOH. Yahoo! Groups Links * To visit your group on the web, go to:

[Repeater-Builder] audio and sq. board

tln 5165 b1 need info on attached wire pin out. thanks Bruce KD4BOH. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is

[Repeater-Builder] Micor mobile transmitter

What is the best way to reduce power on a 100 watt micor mobile for repeater use? I have redused the voltage in to 12.8 volts and have developed a cooling system on the P.A. deck that has constant air flow over the circut board as well as the the heatsink. Thanks, Bruce KD4BOH.