, donlspivey dspivey@
wrote:
I'm currently in the process of converting a Micor (unified type
chassis) base station to repeater duty. I have all factory docs,
a
service monitor and a Motorola test set, unfortunately I don't
have
a
low wattage slug for my wattmeter.
I was fortunate (dumb
I'm currently in the process of converting a Micor (unified type
chassis) base station to repeater duty. I have all factory docs, a
service monitor and a Motorola test set, unfortunately I don't have a
low wattage slug for my wattmeter.
I was fortunate (dumb luck, I guess) to find two Micor
this helps,
Paul
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of donlspivey
Sent: Tuesday, February 28, 2006 8:06 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Help With EF Johnson CR-1000 Repeater
Paul
. Both had the same basic electronics but different
housings.
Does the exciter tune up?
Paul
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of donlspivey
Sent: Monday, February 27, 2006 9:48 AM
To: Repeater-Builder@yahoogroups.com
to 440 OK. It
still
sounds like you need to add some to the helicals.
Paul
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of donlspivey
Sent: Tuesday, February 28, 2006 12:58 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
Ok you Johnson ghuru's out there, please read this.
I was asked by an area ARES group to lend a hand and convert an
EF Johnson CR-1000 series UHF repeater to amateur use. This is, of
course, free gratis on my part, I'll even chip in the ID'er since it's
for a good cause.
I cannot get the
email
and I will forward it to you.
Kevin King SCSA BSCIS
ARS KC6OVD
GMRS KAG0378
EIEIO 2722
Acworth Georgia
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of donlspivey
Sent: Monday, November 14, 2005 9:01 AM
Although I haven't spent a huge amount of time on what should be a
simple conversion, I would like to get the opinion of a Micor guhru or
two.
I'm converting a Micor base to repeater duty. It was originally a dual
receiver single transmitter intermittant duty machine on 149mhz (yup,
both
8 matches
Mail list logo