Dick, thank you for the up-date ...
Neil - WA6KLA
- Original Message -
From: Dick Flanagan K7VC <[EMAIL PROTECTED]>
Date: Tuesday, December 19, 2006 12:50 pm
Subject: [CVRC] FCC Formally Releases Morse Code R&O
> The FCC has released the Report and Order on WT Docket 05-235
Funny thing about that ...
We have two Micor Repeater Stations here (443.050 MHz &
147.36 MHz) with the original Squelch Gate cards still in them
and properly set up according to the Micor Manual(s).
We interconnected the two stations using the factory Line Driver
cards as in
... forwarded ... ;)
- Original Message -
From: Dave <[EMAIL PROTECTED]>
Date: Sunday, December 17, 2006 10:00 am
Subject: [Motorola-Metrum-Motrac-Motran-Mocom] Kellogg's & FCC Sign Pact
> Washington D.C.-
> It was announced today that Kellogg's and the Federal
> Communications C
Hey Ken, I didn't know you are 'that' old.
Back then you may have been a teenager ...
Neil
- Original Message -
From: Ken Arck <[EMAIL PROTECTED]>
Date: Saturday, December 16, 2006 12:08 pm
Subject: Re: [Repeater-Builder] FYI: FCC officially issues R&O dropping code
One time 35-40? years ago, I was applying for an electronic
technician position in Pasadena California. One of the
pre-employment test questions was to draw a block diagram
of a receiver.
As my hobby time back then was amateur radio and I had
been studying the Motorola T44
There is the problem ... the manufacturers put the smoke in
each part very carefully ... then you let it out ...
That will do it every time ...
Neil - WA6KLA
- Original Message -
From: Ian Miller <[EMAIL PROTECTED]>
Date: Friday, December 15, 2006 2:34 pm
Subject:
In another life, 20 years ago or so, my employer was using
Tripp-Lite yellow domed strobe lights for their construction vehicles.
One day, I was visiting the central garage and noticed they had 5
Tripp-Lite strobes on a bench. I asked the foreman why, his reply
was because th
I guess it is time again for a bit of clarification for the
apparent newbies:
PL ... is a registered trademark of Motorola Inc. properly
known as Private Line.
A very polite way of saying the same thing here is
Continuous Tone Coded Squelch System or CTCSS.
The fol
There was, I believe, a Cushman CE - something that had
that tiny pico fuse mounted behind the front panel connector.
You had to remove the bottom cover to access it.
Neil
- Original Message -
From: n9lv <[EMAIL PROTECTED]>
Date: Saturday, December 9, 2006 9:14 am
Subject
I do believe I did state earlier that you might be able to locate
replacement coils with the slugs on this remailer by carefully
posting the exact model number as printed on the circuit board.
Also, don't forget to include which coils you are looking for.
This suggestion comes
Hey Ken,
That is one way to set your deviation ...
> Ok, I really mean it this time...this thread > /dev/null
Neil
... of course, you 'could' ask on here if anyone might have those
coils with cores in a junk receiver board and then send them to you.
Would seem to be much simpler for me ...
Neil
- Original Message -
From: [EMAIL PROTECTED]
Date: Wednesday, December 6, 2006 9:02 am
S
Hello Paul,
I remember them ... well.
I also remember the receivers were triple conversion ... some
used a 30-31 Mc crystal... the others used a 10-11? Mc crystal.
I also remember the quick calculation for amateur band service
was to use the existing 3rd IF conversion
Thanks Eric :)
I took the part number from the Desk Set Models T1370A and T1371A
poop sheet Motorola part number 68P81115A05-P Dated 12/2/77
73,
Neil
- Original Message -
From: Eric Lemmon <[EMAIL PROTECTED]>
Date: Thursday, November 30, 2006 9:24 pm
Subje
Hey John, I heard somewhere there is a 160 meter sloper
hung off one of the Portland West Hills towers ...
Neil
- Original Message -
From: JOHN MACKEY <[EMAIL PROTECTED]>
Date: Thursday, November 30, 2006 9:31 pm
Subject: [Repeater-Builder] Sloper antenna
> Yea, I know it
Ok, who is looking for a collection of Motorola / GE and RCA
manuals for their collection? Included are three GE Datafiles
or as close to as I can identify.
I have about 20 - four drawer file cabinets worth.
Simpler for me if the entire collection were taken by the same
I believe the cable you are looking for is 30C83560A02
c/o 6 conductors and a shield around the brown wire ...
Hope this helps,
Neil - WA6KLA
- Original Message -
From: Com/Rad Inc <[EMAIL PROTECTED]>
Date: Thursday, November 30, 2006 12:41 pm
Subject: [Repeater-Build
Wouldn't hurt ... but if you want the AFC to work properly, you will need
to change the direction of the discriminator diodes.
Neil -
- Original Message -
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
Date: Tuesday, November 28, 2006 7:31 am
Subject: Re: [Repeater-Builde
Not quite ... I believe he stated this radio package is being used at home
- reason for the problem being discussed in the first place.
The 145.45833 MHz birdie seems to be interferring with his ability to hear
a 2 meter repeater output.
A 152.925 MHz birdie may not cause a
Hi ...
447.575 MHz - 11.2 MHz (Intermediate Frequency) = 436.575 MHz
(output of the receiver multiplier injection chain) divided by 3 =
145.45833 MHz. Try high side injection ... that frequency will come
out to 152.925 ...
Neil - WA6KLA
- Original Message -
Most certainly it does ... did that 35+ years ago ... one Motorola
Sensicon 'A' Receiver, one Motorola '80D' transmitter strip, a
power supply out of a Motorola 'Stan Pac' railroad locomotive
2-way radio, a couple of crystals, a pair of gold crystal ovens,
two Motorola cavity resona
Besides a cereal box source, what is a decoder ring?
I probably have the manual ... part of the 'just about to
be tossed stuff' around here ... the drop box arrives
tomorrow morning.
When I get tired of moving manuals to the recycler, the
remaining manuals will also go i
Two ways to do it - one complicated as hell
One is to attempt the web site below ...
The simplest one is send a message to ... see below:
- Original Message -
From: Mike Morris WA6ILQ <[EMAIL PROTECTED]>
Date: Sunday, November 19, 2006 3:00 pm
Subject: Re: [Repeater-Builder]
This coming weekend - starting Friday - tentatively, the garage
here is getting cleaned out. If you are here, you can have some
if you are not here, you can't have some ...
Included ...
Motorola: Motrac, Mocom-70, Micor, Mitrek etc
GE Mastr-Pro, Mastr II, Exec II, whatev
The 'D' in the model number tells me the radio is in the 150-174 MHz range
Also, the FCC number CC 3031 - first digit is a 3 = 150-174 MHz
Neil - WA6KLA
- Original Message -
From: reed_swasey <[EMAIL PROTECTED]>
Date: Thursday, November 16, 2006 12:16 pm
Subject: [Repea
... forwarded ...
Can anyone assist here?
>Neil,
>
>I'm looking for a Motorola publication called the "R56 Handbook,"
>which deals with RF grounding systems. While all bonded together
>in the end (as per NEC), the RF grounding system is not to be
>confused with lightning protection and
How about some 72-76 MHz Micor gear?
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [SPAM:*] [Repeater-Builder] WTB 72-88 Mhz Maxtracs or
GM300's
Date: Tue, 30 May 2006 22:11:30 -0700 (PDT)
>Looking for 72-88 Mhz maxtra
Depends on who you are, where you are, who owns the tower, how
much money you don't have ... and a few other gotchas ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] repeater location fees
Date: Wed, 31 May 2
I question that 9.2 dB antenna, is it actually 9.2 dBd or 9.2
dBi ??
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Wount To Find Out About Buiding A
New Repeter
Date: Wed, 31 May 2006 14:36:47 -00
Yep, he's here ... at least, somewhere ...
If it is a panic, I can call him for you ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Arcom RC-110 Yahoo Group
Date: Mon, 29 May 2006 21:56:57 +0100
>Ken's (
Hi Skipp
>Hi Neil,
>
>Although the example story deviation was excessive, I'm not
>sure the citation would have actually stuck in a band where
>wideband experimental amateur radio modes are allowed. The
>results could have played out a number of different ways.
I would believe the resp
Quite a number of years ago, I knew of an FCC inspection of a
repeater site in southern California - apparently the inspector
didn't know what he was looking at.
As the story went, he removed the output of the exciter to
measure the RF power there ... The exciter consisted of a rack
m
RF RCA Connectors ???
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Need source for RF RCA connectors
Date: Sat, 27 May 2006 21:43:38 -0700
>My stock of RF RCA connectors (the ones used for carrying RF inside
>
That's what I thought ... after someone stated all GMRS
transmitters must be 0.00025% tolerance ...
Thanks,
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Quick GMRS repeater w/ Radius m10
and
Does that 0.00025% apply to mobiles as well?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Quick GMRS repeater w/ Radius m10
and RICK
Date: Sat, 27 May 2006 09:11:43 -0400
>
>The technical requirements for
Well, first off ... we will need the make and model number
of 'that' receiver you are going to use ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] receiver
Date: Tue, 23 May 2006 20:25:55 -0400
>I
I have found the Motorola 85 degree C gold oven to be quite
stable - the earlier black 65 degree C oven wasn't.
I think I found a brand new gold one in stock here a few weeks
ago too.
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subje
Depends on the vintage ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: midland 13-509 tx freq
stability... cap change?
Date: Tue, 23 May 2006 19:53:24 -
>[EMAIL PROTECTED] wrote:
>>
>> Or use a Mot
Or use a Motorola crystal oven @ 85 degrees C ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] midland 13-509 tx freq stability...
cap change?
Date: Tue, 23 May 2006 08:43:33 -0700
>At 5/23/2006 07:20
Ok, enjoy,
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Mitrek COS ?
Date: Fri, 19 May 2006 12:13:02 -0400
>Hi Richard and Neil...
>In my instance, it floats between 3 and 3.5 volts which is just
>enough
http://www.qrz.com scroll down to Name Search ... then type in
the persons name.
Also, I believe you were looking for a Motorola Permakay TU540W
Filter recently.
I looked and I believe I still have a used one ... in the garage.
BTW, the remote radio repeater for the radio statio
I have had similar experiences with a Bearcat 250 Scanner / 10.85
MHz IF as I remember ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] scanner interference
Date: Wed, 03 May 2006 07:06:50 -0400
>>
Come on by sometime (soon) and I will load you up.
I am giving some thought to doing a(another) clean-out of my
garage - away will go the Motrac Collection, accessories,
anything related ...
Also to go will be the Mastr-Pro collection and all accessories.
The next step will be Mi
I am afraid I fall into that too easily ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Electronics and Radio types...
Date: Wed, 26 Apr 2006 12:24:21 -0400
>Tedd Doda wrote:
>> On Wed, 26 Apr 2006 16:03:08 -
Last week, I went to a garage sale ... came back with two Ohmite
Ohm's Law calculators ... and a couple of small plastic boxes of
hard ware which I donated to another group.
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Rep
I have a couple of alternators off a pair of 1960's Dodge police
cars ...
How about an RCA repeater cabinet?
How about an 18" x 18" x 18" box of used telephone and cat-5 wire?
Anybody for some old rotary dial telephones?
How about a 2 line rotary dial Key Telephone System (I th
Skipp,
You have an excellent idea ... I should send all of this to
Mike Morris, WA6ILQ ... for 'his' collection.
Included will be several boxes of used telephones ... and a
whole bunch of other stuff too.
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Bui
I know of a city in the Pacific Northwest whose communications
shop manager apparently would not hire you if you were a ham.
Since he left (retired?) things have changed - at least one
ham works there now.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: R
Ok, I will watch ... from here ...
Neil
>OK, I'll make a citizens arrest or write a citizens ticket to the
>next cop I
>see yakking
>on his radio while driving his cop car.
>
>Dick
>
>- Original Message -
>From: [EMAIL PROTECTED]
>To: Repeater-Builder@yahoogroups.com
>Cc: [EMAI
But don't call it a ?issue ... ???
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: A couple of questions about hard
line
Date: Tue, 25 Apr 2006 10:54:33 +0800
>So what is the ?issue.
>Sorry I could not resis
As I remember, there were a couple of ways to do that anyway -
without using various tones ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] telco and ctcss tones
Date: Mon, 24 Apr 2006 21:59:41 -
>If you
You're right John ...
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Acoupleofquestionsabouthardline ??
Date: Mon, 24 Apr 2006 18:27:47 -0400
>The MF or Muti Freq. tones were even numbers 700 + 900,
>700 + 1100, 900 + 11
Early seventies, one of the guys in the Los Angeles area ...
had his apartment telephone off-premises extension installed
at his repeater site.
1) cheap auto-patch phone line
2) phone line control of his repeater
Ken, one guess who ...
Neil
Original Message
From: [
Quiet Tone ... Uh huh ... :)
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] telco and ctcss tones
Date: Mon, 24 Apr 2006 21:59:41 -
>If you go back far enough, you might find someone who's heard
>of the book "Notes
Sure thing Larry, this is great!
Don't you think so?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: A couple of questions about hard
line
Date: Mon, 24 Apr 2006 14:58:24 -0700 (GMT-07:00)
>Ok, are we ha
Hi, I believe the term Multi-Frequency was used to describe the
early AT&T inter office toll dialing scheme.
The tones used were not the tones you hear on your telephone -
but another completely different group.
If I dig around here far enough, I may still have the
information.
Instead of a roll of non-skid?
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: A couple of questions about hard
line
Date: Mon, 24 Apr 2006 16:48:04 -
>Please pass me a Kleenex!
>--- In Repeater-Builder@yahoogrou
Of course !!
CG = Channel Guard - General Electric
PL = Private Line - Motorola
QC = Quiet Channel - RCA
All are commonly referred to by CTCSS
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Bui
The proper name Heliax is owned by Andrew Corp.
If you don't know what type hard line you have is, don't name
it Heliax.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] A couple of questions about
Like Vince said ... Tx power = 100uW / receiver sens 1V ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Good bye!
Date: Sun, 23 Apr 2006 19:30:38 -0700
>At 4/23/2006 17:58, you wrote:
>>There mu
Thank you Kevin, well put !!
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Good bye!
Date: Sun, 23 Apr 2006 20:17:40 -0400
>Teton Amateur Radio Repeater Association (TARRA) wrote:
>> I have only belonge
Yes, a good magazine ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] April AGL Digital issue<- several
good articles
Date: Mon, 17 Apr 2006 14:05:12 -0400
>Begging the list owners pardon, I noticed several arti
If nothing else, be certain both tones are not distorted.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Two CTCSS Tones out of One TX
Date: Fri, 21 Apr 2006 18:20:43 -0700 (PDT)
>You will likely end up
Oh ...
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Anetenna Help
Date: Fri, 21 Apr 2006 20:01:23 -
>--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
>>
>>
>> Top of my garage door is 10' hi
Top of my garage door is 10' high ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Anetenna Help
Date: Fri, 21 Apr 2006 18:06:27 -
>
>> Ahem ... I use a quarter wave antenna on each band with the NMO
Only 10 dB ???
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] That horrible noise
Date: Fri, 21 Apr 2006 09:40:34 -0700
>Scott, your math is off by +10dB.
>
>On 4/21/06, Scott Zimmerman <[EMAIL PROTECTED]> wrote
Would you want to believe 146.85 - 146.73 = 0.12 or 120 kHz?
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] That horrible noise
Date: Fri, 21 Apr 2006 12:28:12 -0400
>Guys,
>
>I think you're missing one
>I use an SG-7900, which diamond tells me that they don't recommend
>for mobile use (where ELSE should I put it??)
Do you really want an answer?
>I had the same problem with the roof metal being too flexible.
>I used a Ryobi Weedeater blade inside, as a giant washer, and
>another conven
Good description Lance ... and R1091 is correct.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] back-up battery charging
Date: Tue, 18 Apr 2006 10:36:54 -0400
>Hello,
>I have several of these Micor repe
Is it capable of carrying 30 amperes or so?
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] back-up battery charging
Date: Tue, 18 Apr 2006 01:11:01 EDT
>Also look at west mountain the rigblaster people.
If the Micor Power Supplies are either TPN1105A or TPN1106A yes,
the outputs are adjustable -
If not those model numbers, no, they can't be adjusted for
specific battery charging.
BTW, there are seven specific Micor Power Supplies by model number.
The two mentioned above, TPN1151
Hi Tom,
Didn't know you are on here too ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Dayton Hamvention Reply back (as
requested)
Date: Mon, 17 Apr 2006 16:22:16 -0700
>HAVE FUN, KEN
>
>TOM
>
Oh, you seem to collect them too ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Trade a Bird 43 (with slugs) for
a telewave meter?
Date: Wed, 12 Apr 2006 08:24:36 -0500
>I was working at Bell Communicati
Me too ...
I started using a Bird 43 long before I ever heard of Telewave
- about 42-43 years ago.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Trade a Bird 43 (with slugs) for a
telewave meter?
You are welcome,
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] M-Pro
Date: Tue, 11 Apr 2006 16:04:23 -0500
>Thank You for checking.
>73's
>Fred
>- Original Message -
>From: <[EMAIL PROTECTED]>
>To:
>
I looked - thought I had one but don't ... all are sufffux 66,
77 & 88
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] M-Pro
Date: Tue, 11 Apr 2006 10:27:21 -0500
>To All: Wanted, High split, low band,
Thanks Fred,
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] M-Pro
Date: Tue, 11 Apr 2006 13:13:03 -0500
>Neil: MT74---33- for a mobile.
>Fred
>
>- Original Message -
>From: <[EMAIL PROTECTED]>
>To:
>Se
Hi,
I should have some of that / those in my garage. It's just
I need to think about what complete radio model number I am
looking for when I get out there in a few minutes.
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [
I wonder how will you keep wrong extension dialers from using
an FCC License required radio system?
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Connecting a repeater to a PBX
Date: Thu, 6 Apr 2006
Not any more ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT - Jeep Cherokee
Date: Thu, 06 Apr 2006 13:15:32 -0500
> Do you have anything USEFULL to add to this discussion,
>Neil?
>
>-- Original Messa
No,
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT - Jeep Cherokee
Date: Thu, 6 Apr 2006 11:24:59 -0400
>
> Anybody interested in starting a "OT - Jeep
>[EMAIL PROTECTED]" forum ?
>Ken;>)
>
One of your vehicles did as it was plainly noticeable from the
rear.
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT - Jeep Cherokee
Date: Thu, 06 Apr 2006 00:06:37 -0500
>No, I never had a "spare engine in
Exellent choice!
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Birdies in - Jeep Cherokee
Date: Thu, 06 Apr 2006 00:18:24 -0500
>Every 4x4 I have had for the last 20 years, when a u-joint goes
>bad I replace i
That was the one with the spare engine in the back seat?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT - Jeep Cherokee
Date: Wed, 05 Apr 2006 10:56:52 -0500
>I sold the Scout 11 years ago.
>
>-- Origin
>>Hi John,
... snip ...
>>The drive shaft and 4wd front knuckle U-Joints without
>>grease fittings are/were my only complaint. I just had the
>>originals replaced with new Spicer units, which have the
>>much desired grease fittings. Doesn't have anything to do with
>>the radio, but wha
My first HiFi amplifier used a pair of 807's ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Favorite power swr bridge
Date: Wed, 5 Apr 2006 10:39:14 -0400
>What I meant to say Steve is,the 807 Tubes
Gas mileage?
Say that to my 1990 Suburban - 358,000+ miles - original engine.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] OT - Jeep Cherokee
Date: Wed, 5 Apr 2006 07:25:57 -0400
>I have a 89 with
What happened to your International Scout?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] OT - Jeep Cherokee
Date: Wed, 05 Apr 2006 02:19:52 -0500
>Yes, a slightly off topic question.
>
>I recently acquired a 19
Sure, I have used a Telewave ... but only when one of my Bird
Model 43 Wattmeters wasn't convenient.
My preference? Bird Model 43 anytime.
Neil - WA6KLA
BTW, I have several of them too.
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sub
Most likely Mike Morris went there ...
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] RE: Don't miss it
Date: Mon, 3 Apr 2006 15:12:43 -0700
>
> From Arcadia High School?
>
> Original Message ---
From Arcadia High School?
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] RE: Don't miss it
Date: Mon, 03 Apr 2006 14:47:30 -0700
>He must have - he's got a high school diploma!
>
>At 12:44 PM 04/03/06, you wrote:
>>If i
Original Message
Subject: RE: Don't miss it
Date: Mon, 3 Apr 2006 10:37:36 -0700
>On Wednesday of this week, at two minutes and three seconds after
>1:00 in the morning, the time and date will be 01:02:03 04/05/06.
>
>That won't ever happen again.
>
>You may now return to your (normal
'This page cannot be displayed.'
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] LMR coax
Date: Mon, 03 Apr 2006 07:49:23 -0400
>I sent the first one too soon! Too early, not enough coffee!
>
>Your frien
Thought you might like it ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] This ought to keep you busy - Amazing
Jigsaw Puzzle
Date: Fri, 31 Mar 2006 15:50:39 -0500
>Neil,
>It took about 1.5 minutes... it is
Hey,
I 'think' you replied with your snail mail address ... but now
I can't find that message ...
Again please?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] TLE 1062 B
Date: Fri, 24 Mar 2006 08:05:46
I have never used it - preferring to Andrew Heliax for each
requirement.
Neil - WA6KLA
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] LMR coax
Date: Sat, 1 Apr 2006 21:05:54 -0600
>Recently there were some negativ
Larry ... on a dialup?
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Way OT, but a question...
Date: Sat, 1 Apr 2006 11:15:07 -0800 (GMT-08:00)
>Comes up fine, here, even on my slow dialup connection. Or are yo
"This page cannot be found."
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Way OT, but a question...
Date: Sat, 01 Apr 2006 01:38:11 -0800
>Some interesting boxes have been appearing on street lights in my
>are
Ok ...
Neil
Original Message
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] This ought to keep you busy - Amazing
Jigsaw Puzzle
Date: Fri, 31 Mar 2006 12:46:47 -0600
>My blocked senders list is getting fuller.
>
>
>- Original Mess
1 - 100 of 152 matches
Mail list logo
