[Repeater-Builder] Re: Vibrasponder needed TLN8381A 114.8 Hz

2010-06-16 Thread ve3ext
try Ted MDM in chicago Google MDM for the website Jerry VE3 EXT

[Repeater-Builder] Re: frequency listing and montioring site chicago area

2010-04-24 Thread ve3ext
Ted any chance you're going to Dayton??? Jerry VE3 EXT

[Repeater-Builder] Re: MSR2000 PL during COR with TRN5073A

2010-04-10 Thread ve3ext
Eric tnx for the info, will try here on two repeaters Jerry VE3 EXT

[Repeater-Builder] Re: MSR2000 PL during COR with TRN5073A

2010-04-09 Thread ve3ext
so Eric- to clarify your mod---what exactly did you do ? Tnx Jerry VE3 EXT

[Repeater-Builder] Re: Motorola MSR2000

2010-03-22 Thread ve3ext
Larry where are you located ? Tnx Jerry VE3 EXT

[Repeater-Builder] Re: Someone still loves a Motrac - Low Band Even...

2010-03-06 Thread ve3ext
all of this brings up the question we all have early mot/ge euipment, most still working. Who wants it? Is there a two way museum? I assume Motorola has one ??? Example, I have a 4channel ex FBI all tube radio, 2 6146's in the P.A., was vibrator, now diode rect. A shame to send to the

[Repeater-Builder] Re: Bend an ICOM a little further

2010-02-18 Thread ve3ext
no crystal mfctrs left in Canada now, that West is out of business--to my knowledge Jerry VE3 EXT

[Repeater-Builder] Re: WR repeater VHF for sale ATT WR owners !!!!

2010-01-16 Thread ve3ext
Rick please call me at 519-969-8893 to discuss. Jerry VE3 EXT (near Windsor)

[Repeater-Builder] Re: Slightly OT - need schematic for MOTO T/T mic

2009-12-27 Thread ve3ext
Ian I beleive I have thisI am away until next week, email me then if you still need it Jerry VE3 EXT

[Repeater-Builder] ritron vhf repeater plus model rr150

2009-11-23 Thread ve3ext
this is the silver box, note it is vhf, not uhf. My question in the absence of any documentation is--what is the minimum spacing, in order to use the internal duplexer. Presently it's 2.7 mhzs between the tx/rx !! If anyone has a manual, I will gladly pay to copy ! This to be used for ares

[Repeater-Builder] Re: Tone Reeds Needed (swap?)

2009-11-02 Thread ve3ext
Ted have any for 118.8., for the MSR repeater Jerry VE3 EXT

[Repeater-Builder] Re: extender board wanted TLN 5935A

2009-10-22 Thread ve3ext
Mike tnx for the tip--been doing that for a while,would like to find that extender board for the MSR tnx/73 Jerry VE3 EXT

[Repeater-Builder] Re: Vibrasponder KLN 6209A 123.0Hz..

2009-07-10 Thread ve3ext
try Ted at MDM in Chicago !Google his website Jerry VE3 EXT

[Repeater-Builder] MSR2000 p.a. model VLD1032A

2009-06-25 Thread ve3ext
Skipp and all- finishing up this conversion, looking for instructions on properly tuning this P.A. It seems to be a canadian 40watt intermitent P.A., would like to find the power control board instructions., it's presently putting out 40+ watts in the 155 MHz range. It looks very close to a

[Repeater-Builder] Re: WTB Ritron RR-455 desktop repeater

2009-06-04 Thread ve3ext
Have a couple., let me find, assess and get back to you Jerry VE3 EXT

[Repeater-Builder] Re: MSR2000 Repeater

2009-04-09 Thread ve3ext
I've mailed twice offering $100., as a repeater--did you receive my emails?? Jerry VE3 EXT

[Repeater-Builder] Re: Western Radio Model 90

2009-01-17 Thread ve3ext
I think I have these!!! Are they VHF ?? S Also., give me model numbers of the various boards I have a wr repeater in service here., fairly easy to work on Let me know ? Jerry VE3 EXT

[Repeater-Builder] GM300 service manual ! mobile radios

2008-12-05 Thread ve3ext
Am getting desperate to find one! Can someone help? Pls. reply offlist with details. Tnx Jerry VE3 EXT

[Repeater-Builder] Re: VHF Engineering

2008-11-18 Thread ve3ext
I'm sure Eric Lemmon will see this and contact you . Jerry VE3 EXT

[Repeater-Builder] Re: Motorola MSR-2000 Manual available on Ebay

2008-10-15 Thread ve3ext
Looking for the UHF msr 2000 manual here---anyone please/ tnx Jerry VE3 EXT

[Repeater-Builder] identifying Sinclair UHF Duplexer Model 1965

2008-10-12 Thread ve3ext
Can someone pls. give me the basic specs., especially max. power level ?? Small enclosure., approx. 12x6x4 high . Rx side has three cavities., square., tx side has two cavities. Tnx for the assist Jerry VE3EXT

[Repeater-Builder] Re: Ritron Repeaters

2008-10-06 Thread ve3ext
MikeI have the complete manual for the modellrr-450., silver face repeater. If interested., let me know in two weeks(I am away now)., and I'll copy for you. Jerry VE3 EXT

[Repeater-Builder] Re: Ritron Repeaters

2008-10-06 Thread ve3ext
Scott Happy to send to you in two weks., do with it as you like !!! Jerry VE3 EXT

[Repeater-Builder] Re: Ritron Repeaters

2008-10-04 Thread ve3ext
Skipp - I echo your comments., I have had good luck with these !!! Jerry VE3 EXT

[Repeater-Builder] Re: Ritron Repeaters

2008-10-03 Thread ve3ext
Brian I have converted two ritron responder., model rr-450 They work good., but internal duplexer is right on the edge., an external one would work better., (out of range)., as they are indeed 450-470 mhz Jerry VE3 EXT

[Repeater-Builder] Re: MSR2000 manuals

2008-09-27 Thread ve3ext
George have you received a reply to your query re manuals ??/Let me know-I may be able to assist?? Jerry VE3 EXT

[Repeater-Builder] Re: Micor Power Supply

2008-08-12 Thread ve3ext
wb6mmv do you still need assistance., I can help, I think ?? Jerry VE3 EXT

[Repeater-Builder] Re: RITRON PATRIOT RRX450

2008-08-07 Thread ve3ext
Jack my model is rr-450 ., no x., what do you need? Jerry VE3 EXT

[Repeater-Builder] Re: R1 Audio Squelch CArd

2008-07-24 Thread ve3ext
Grant -I have one., audio goes up and down., pot needs cleaning., yours for $11.00,$10+ postage Jerry VE3 EXT

[Repeater-Builder] msr 2000 TPN 1191A power supply

2008-06-18 Thread ve3ext
Hi Group need an auxilary regulator board,# TRN5119A for the above supplycan someone assist please ?? Thanks Jerry VE3 EXT

[Repeater-Builder] Identifying a Motorola UHF amp

2008-04-15 Thread ve3ext
Trying to ID!! only numbers are TLE5791A TLE2283B Also., it won't fire up-what am I missing to get output? Tnx Jerry VE3 EXT

[Repeater-Builder] Re: TPL Manual

2008-03-01 Thread ve3ext
Bill I think I have this-away until April., contact me then if still required ? Jerry VE3 EXT

[Repeater-Builder] Re: RITRON RRX-450 UHF PROGRAMMABLE REPEATER

2008-02-01 Thread ve3ext
Jack will copy and mail next weekgive me your address. Easiest for me is cash in an envelope., shoudn't be more than a few dollars., I'll let you know Jerry VE3 EXT P.S. what's your amateur call sign ? Just curious

[Repeater-Builder] Re: RITRON RRX-450 UHF PROGRAMMABLE REPEATER

2008-01-29 Thread ve3ext
Jack I've just done two., easy conversion, however the built in duplexer is at its' range end., one tuned good., the other so., so., I still have to play a bit more. 40 page manual can be copied and sent to you-let me know Jerry VE3 EXT

[Repeater-Builder] Re: msr 2000 audio board needed

2007-10-04 Thread ve3ext
Ted not sure what 8 fingers mean, pls. confirm its' the TRN 9689---money order for $25. and shipping, how much? will be on the way Tnx Jerry VE3 EXT

[Repeater-Builder] msr 2000 audio board needed

2007-10-03 Thread ve3ext
Looking for the R1 audio board., either TRN 9688 or TRN 9689 ! Ours is acting squirelly., don't really want to drag the repeater back here. Please reply offlist please with the details price etc. Tnx Jerry VE3 EXT

[Repeater-Builder] Re: msr 2000 audio board needed

2007-10-03 Thread ve3ext
Skipp- audio level varies from none to ok., good for a few days., then no audio agn. Pots have been cleaned., rotated., pin contacts cleaned, still have the problem. Easier to replace the board then drag the repeater home for service. Can you help? Tnx Jerry VE3 EXT

[Repeater-Builder] Re: msr 2000 audio board needed

2007-10-03 Thread ve3ext
Ted pls. check the number ,you state 9869??., we need TRN 9689? Did you transpose the number , by chance? If it's the trn9689., pls. state payee, and shipping to Boston Ma. Tnx Jerry VE3 EXT

[Repeater-Builder] msr 2000 repeater audio board needed

2007-10-02 Thread ve3ext
Looking for the R1 audio board, either TRN 9688 or 9689 !! Please reply off list re pricing/availability ? Tnx Jerry VE3 EXT

[Repeater-Builder] Mail delivery failed: returning message to sender (fwd)

2007-10-01 Thread ve3ext
--Forwarded message -- Return-path: Envelope-to: [EMAIL PROTECTED] Delivery-date: Mon, 01 Oct 2007 19:45:02 -0400 Received: from chip8mx92.postini.com ([64.18.15.152] helo=psmtp.com) by mail-02.primus.ca with smtp (Exim 4.63) id 1IcUwg-0001XY-HD for

[Repeater-Builder] Re: Sinclair Q-2B05D duplexer

2007-09-21 Thread ve3ext
Burt tnx for the info Jerry VE3 EXT

[Repeater-Builder] Re: Sinclair Q-2B05D duplexer

2007-09-16 Thread ve3ext
Laryn - many tnx for the info. As I suspected., won't do ham 600 khz split. I guess I'll dispose of. Tnx again Jerry VE3 EXT

[Repeater-Builder] Sinclair Q-2B05D duplexer

2007-09-14 Thread ve3ext
Trying to find specs of the above. It appears to be abt. 20 yrs. old., 5 mhz spacing ?? Any further info is appreciated. Jerry VE3 EXT

[Repeater-Builder] msr 2000 squelch gate card TRN 5324A

2007-07-05 Thread ve3ext
Looking for the above---can anyone help?? Please reply off list,with your comments re $$ etc. Thanks Jerry VE3 EXT

[Repeater-Builder] Re: msr 2000 squelch gate card TRN 5324A

2007-07-05 Thread ve3ext
Tnx for the tip-I had heard that but forgot about it Thanks Jerry VE3 EXT

[Repeater-Builder] Re: GE MASTR II

2007-05-27 Thread ve3ext
Dave no trays but have the big power plugs for mastr ii i beleive. Problem is I'm mobile for 2 wks., if still required, pls. contact me then Jerry VE3 EXT

[Repeater-Builder] Re: 100 Hz Vibrasponder

2007-05-24 Thread ve3ext
try Ted at MDM in Chicago ! Jerry VE3 EXT

[Repeater-Builder] Racom model 1401 cw ider manual needed !!

2007-05-21 Thread ve3ext
Does anyone have one I can copy and return ?? I appreciate the help !! Jerry VE3 EXT

[Repeater-Builder] TPL VHF Amplifier model 802B PAB 100-3

2007-04-26 Thread ve3ext
Looking for instruction sheet/schematic for the above? Any assistance is appreciated !! Jerry VE3 EXT

[Repeater-Builder] Re: Old Sinclair Duplexer

2007-03-13 Thread ve3ext
Doug-been away---now returned,will dig up ,copy and mail,(no scanner) I will tell you when in the mail Jerry VE3 EXT

[Repeater-Builder] Re: Old Sinclair Duplexer

2007-03-10 Thread ve3ext
Doug- I beleive I have the complete manual/tuneup etc., let me know if you want, I will copy and send to you Jerry VE3 EXT

[Repeater-Builder] Re: csc cwid-50b manual???

2007-03-09 Thread ve3ext
Ted didi you locate??? I may have pone here--let me know and i'll go find it. Jerry VE3 EXT

[Repeater-Builder] Re: Trade repeater stuff for UHF mobile

2007-01-07 Thread ve3ext
Jeff Any complete repeaters., low band or vhf?? Jerry VE3 EXT

[Repeater-Builder] Re: Wanted Channel Guard programmable for Master 2

2006-04-02 Thread ve3ext
Appears I have one here marked 19D432500G, never used., 10 dip switches. Pls. reply off list., we'll discuss Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email

[Repeater-Builder] Mot tx amp model TLE 1693A

2006-03-19 Thread ve3ext
For what Band.?? there are many on Ebay now if you're interested ! Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of

[Repeater-Builder] Re: Decibel duplexer harness lengths

2006-03-12 Thread ve3ext
I agree- i've successfully used connectors many times to see if I'm going in the right direction !! Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to:

[Repeater-Builder] Re: WTB: Vibrasponder reeds

2006-02-27 Thread ve3ext
See Ted @ MDM in Chicago., $5.00 each Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to:

[Repeater-Builder] Re: Mystery 2M cans

2006-01-25 Thread ve3ext
To All- I beleive these are Sinclair F150 Cans Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is

[Repeater-Builder] MSR 2000 need 118.8 PL Vibrasponder reeds

2006-01-09 Thread ve3ext
Hi-Our Group is looking for two 118.8 PL reeds. Where to purchase ? We have a 131.8 set if anyone is interested in a trade. Tnx P.S. Motorola pt.# is KLN6209A Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to:

[Repeater-Builder] Re: MAXAR UHF radios for link.

2006-01-06 Thread ve3ext
Any chance to see the circuit of this two trans. cos switch? Tnx Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of

[Repeater-Builder] Re: GE Mastr II UHF Receiver

2005-12-31 Thread ve3ext
Jim- try Brocomm in Burlington Ontario,formerly Spantek.They usually have lots of gear in that freq. range. Best 73 Jerry VE3 EXT Windsor Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group,

[Repeater-Builder] Re: MSR-2000 conversions on the web

2005-08-07 Thread ve3ext
Tnx skip., I appreciate the tips., I'll pursue Best 73 Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo!

[Repeater-Builder] Re: WTB: 100 Watt Repeater Full Cycle Duty

2005-08-06 Thread ve3ext
sSkip- could you please tell us the sites that explain msr 2000 to a controller!! Tnx Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL

[Repeater-Builder] Re: CSC CWID manual needed

2005-07-31 Thread ve3ext
Frank Please give me the exact model #., I think I have the manual. Do you have a source to program the ID chip?? Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send

[Repeater-Builder] Re: help, wanted

2005-06-05 Thread ve3ext
Try John VE3 AMZ., see QRZ.COM., he lives in the Kitchner Ontario area Jerry VE3 EXT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use