Re: [Repeater-Builder] Ruggedised panel antennas
Try the Polar Electronics Sector Coverage Panel Antenna model 375A. At 10dBd it a little short on gain but. Web site www.polarelectronics.com.au Cheers, Jack. VK4JRC Sent from my Apple iPad Tablet PC On Jul 7, 2010, at 3:24 PM, Gareth Bennett gare...@es.co.nz wrote: Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) Just after feedback and opinions Cheers Gareth Bennett RadioSystems Limited P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Oz-in-DFW To: Repeater-Builder@yahoogroups.com Sent: Wednesday, July 07, 2010 10:07 AM Subject: Re: [Repeater-Builder] Proto boards Or: http://www.wa5vjb.com/products4.html 6.5 by 4.25 Large Proto Board $5 3.75 by 2.75 Small Proto Board $3 Kent is also a source of economical built-to-spec preamps. -- mailto:o...@ozindfw.net Oz POB 93167 Southlake, TX 76092 (Near DFW Airport)
Re: [Repeater-Builder] Ruggedised panel antennas
On 7/7/2010 2:32 AM, Jack Chomley wrote: Try the Polar Electronics Sector Coverage Panel Antenna model 375A. At 10dBd it a little short on gain but. Web site www.polarelectronics.com.au Cheers, Jack. VK4JRC Except that 10 dBd is a little more then 2db gain over the 10 dBi he spec'd! On Jul 7, 2010, at 3:24 PM, Gareth Bennettgare...@es.co.nz wrote: Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) Just after feedback and opinions Cheers Gareth Bennett
Re: [Repeater-Builder] Ruggedised panel antennas
Ahem..senior moment!! Sent from my Apple iPad Tablet PC On Jul 7, 2010, at 10:49 PM, wd8chl wd8...@gmail.com wrote: On 7/7/2010 2:32 AM, Jack Chomley wrote: Try the Polar Electronics Sector Coverage Panel Antenna model 375A. At 10dBd it a little short on gain but. Web site www.polarelectronics.com.au Cheers, Jack. VK4JRC Except that 10 dBd is a little more then 2db gain over the 10 dBi he spec'd! On Jul 7, 2010, at 3:24 PM, Gareth Bennettgare...@es.co.nz wrote: Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL)
RE: [Repeater-Builder] Ruggedised panel antennas
Gareth, If it's of any help I have two new/old stock heavy duty Scala yagis available in the 460-470Mhz range. These are in the factory radomes as well. I'm looking to get rid of them because I don't think I'll ever use them. Reply directly to me if interested. Gary R. California _ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Gareth Bennett Sent: Tuesday, July 06, 2010 10:25 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Ruggedised panel antennas Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) Just after feedback and opinions Cheers Gareth Bennett RadioSystems Limited P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Oz-in-DFW mailto:li...@ozindfw.net To: Repeater-Builder@yahoogroups.com Sent: Wednesday, July 07, 2010 10:07 AM Subject: Re: [Repeater-Builder] Proto boards Or: http://www.wa5vjb.com/products4.html 6.5 by 4.25 Large Proto Board $5 3.75 by 2.75 Small Proto Board $3 Kent is also a source of economical built-to-spec preamps. -- mailto:o...@ozindfw.net Oz POB 93167 Southlake, TX 76092 (Near DFW Airport)
RE: [Repeater-Builder] Ruggedised panel antennas
Happens to juniors too! Kb0wlf Sent from my Pascal’s Analytical Engine From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jack Chomley Sent: Wednesday, July 07, 2010 4:05 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Ruggedised panel antennas Ahem..senior moment!! Sent from my Apple iPad Tablet PC On Jul 7, 2010, at 10:49 PM, wd8chl wd8...@gmail.com wrote: On 7/7/2010 2:32 AM, Jack Chomley wrote: Try the Polar Electronics Sector Coverage Panel Antenna model 375A. At 10dBd it a little short on gain but. Web site www.polarelectronics.com.au Cheers, Jack. VK4JRC Except that 10 dBd is a little more then 2db gain over the 10 dBi he spec'd! On Jul 7, 2010, at 3:24 PM, Gareth Bennettgare...@es.co.nz wrote: ? Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) http://geo.yahoo.com/serv?s=97359714/grpId=104168/grpspId=1705063108/msgId=101684/stime=1278506874/nc1=6083913/nc2=4025338/nc3=5733767 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.439 / Virus Database: 271.1.1/2962 - Release Date: 07/07/10 06:36:00
[Repeater-Builder] Ruggedised panel antennas
Hi Group, I'm just wondering if anybody has an alternative to Katherin-Scala for heavy duty radomed panel antennas in the 450-500 MHz band at around 10dBi gain that will stand up to the abuse of an alpine site (2Km ASL) Just after feedback and opinions Cheers Gareth Bennett RadioSystems Limited P.O. Box 5202 Dunedin 9024 New Zealand DDI: (03) 489 1101 FAX: (03) 489 1151 MOB: (0224) 588 377 gare...@radsys.co.nz - Original Message - From: Oz-in-DFW To: Repeater-Builder@yahoogroups.com Sent: Wednesday, July 07, 2010 10:07 AM Subject: Re: [Repeater-Builder] Proto boards Or: http://www.wa5vjb.com/products4.html 6.5 by 4.25 Large Proto Board $5 3.75 by 2.75 Small Proto Board $3 Kent is also a source of economical built-to-spec preamps. -- mailto:o...@ozindfw.net Oz POB 93167 Southlake, TX 76092 (Near DFW Airport)