Re: [Repeater-Builder] Quick CW ID'er

KE4PWE - Original Message - From: "Bob M." <[EMAIL PROTECTED]> To: Sent: Sunday, March 19, 2006 7:45 AM Subject: Re: [Repeater-Builder] Quick CW ID'er > Communications Specialists (the folks who make tiny PL > encoders and decoders) also has a CW ID board that >

RE: [Repeater-Builder] Quick CW ID'er

At 3/19/2006 09:00, you wrote: >Bill, > >Cheap is not always best. The easy solution is a Communications Specialists >ID-8, which costs about $70. Go here: Well, when you can get yourself a low-end repeater controller with the IDer for ~$70, I consider that overpriced. Bob NO6B Yahoo!

Re: [Repeater-Builder] Quick CW ID'er

Yup, later it worked for me too. Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Quick CW ID'er Date: Sun, 19 Mar 2006 16:42:00 -0800 (PST) >Worked for me at 1930EST 3/19/06. > >Bob M. >=

Re: [Repeater-Builder] Quick CW ID'er

Worked for me at 1930EST 3/19/06. Bob M. == --- [EMAIL PROTECTED] wrote: > > "The page cannot be found." > > Neil - WA6KLA > > Original Message > From: [EMAIL PROTECTED] > To: Repeater-Builder@yahoogroups.com > Subject: Re: [Repeater-Bu

Re: [Repeater-Builder] Quick CW ID'er

Beware of Echostation,it has inherent problems with tone decoding and transmitter lock-up.The program is flawed! I would avoid it. BT,DT73,Lee Charles Mumphrey wrote: > I run the ID-8 also...wired up to a connector plugs right into my GR500 > rick controllerworks well...but no nifty-keen

RE: [Repeater-Builder] Quick CW ID'er

ginal Message > Subject: RE: [Repeater-Builder] Quick CW ID'er > From: "Eric Lemmon" <[EMAIL PROTECTED]> > Date: Sun, March 19, 2006 11:00 am > To: > > Bill, > > Cheap is not always best. The easy solution is a Communications Specialists > ID-8, which co

Re: [Repeater-Builder] Quick CW ID'er

Hi Bill, Hamtronics, Inc sells a nice ones. U can take a look at http://www.hamtronics.com/pdf/Manuals/CWID-2.pdf or maybe do it yourself. 73's from Paulo Fernandes Lisbon, Portugal On Sun, 2006-03-19 at 12:10 +, wa9ba wrote: > Has anyone came up with a cheap easy CW ID'er for a GR 500 repea

Re: [Repeater-Builder] Quick CW ID'er

Actually plays fine here. Jim-WA9FPT - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Sunday, March 19, 2006 16:00 PM Subject: Re: [Repeater-Builder] Quick CW ID'er > > "The page cannot be found." > > Neil - WA6KLA > > --

Re: [Repeater-Builder] Quick CW ID'er

"The page cannot be found." Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Quick CW ID'er Date: Sun, 19 Mar 2006 13:57:20 -0800 >The ID-8 was used in this project - and there are

Re: [Repeater-Builder] Quick CW ID'er

The ID-8 was used in this project - and there are some photos that might help you to decide if it's the unit for you. Since you will be injecting it into the mic jack you won't need the op-amp-buffer that the project in the photos neede

Re: [Repeater-Builder] Quick CW ID'er

hoogroups.com > [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of wa9ba > Sent: Sunday, March 19, 2006 4:10 AM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Quick CW ID'er > > Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater

RE: [Repeater-Builder] Quick CW ID'er

d reliable device. I have several in service. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of wa9ba Sent: Sunday, March 19, 2006 4:10 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Quick CW ID'

Re: [Repeater-Builder] Quick CW ID'er

Goodmorning Bill and the group. I have the GR300 with the RICK and I am using the Communications Specialists Inc. model ID-8; works great. Go to: http://www.com-spec.com/index1.htm and see what all they offer. Rod KC7VQR Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater? I

Re: [Repeater-Builder] Quick CW ID'er

Communications Specialists (the folks who make tiny PL encoders and decoders) also has a CW ID board that might do the trick. I guess it depends on your idea of "cheap", but I think it's around $50 and would do the trick for commercial as well as amateur stations. Bob M. == --- wa9ba <[EMAIL P

RE: [Repeater-Builder] Quick CW ID'er

you don't have to buy anything!) -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of wa9ba Sent: Sunday, March 19, 2006 7:10 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Quick CW ID'er Has anyone came up with a cheap easy C

[Repeater-Builder] Quick CW ID'er

Has anyone came up with a cheap easy CW ID'er for a GR 500 repeater? I was hoping I could find something that would say plug into the mic socket that would ID every 10 minutes. Bill WA9BA Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Rep