Not Saying this would work for everyone Most do not need a Ant for one
Freq , at 444.750 the SWR was a 3.5
The Fiberglass radome actually unscrewed from the bottom when removed it was
a Single Copper Wire with 3 Coils. The wire on the Top was in a Sleeve that
would allow You to Unsolder a
Thanks Jim it is Made for that Freq Center at 445 But it is a Little High
Antenex FG-4405 Actually 72 In
http://tinyurl.com/ydenqf4
Don KA9QJG
Good luck. I don't know what is inside the tube but whatever it is it is
too short. If there are several sections you may not b
eater-Builder@yahoogroups.com
Sent: Sunday, September 27, 2009 12:49 AM
Subject: [Repeater-Builder] Retune a Ant
__ Before I try and re invent the wheel I thought I ask if anyone else has
already did this or even if it could be done.
I have a 48 in Ant made by Antenex 5DB uhf
__ Before I try and re invent the wheel I thought I ask if anyone else has
already did this or even if it could be done.
I have a 48 in Ant made by Antenex 5DB uhf Base that I plan on
using on a repeater at 444.750 the actually ant is enclosed inside the
fiberglass tube.
The SWR
4 matches
Mail list logo