John, I have replaced the amplifier power injector with a basic Radio shack mast mount model , the device that powers the winegard amp it has a higher quality of parts it also will improve your picture signal. i use it for my HDTV reception in th e madisn wI AREA WITH THE OMNI 2000 ANTENNAAdam
if the culperate was a wingard 2000 omni antenna, its the power injector! i replaced mine with a Radishack model (only the power injector) and fixed the intereference and improved my HDTV reception.Andrew [EMAIL PROTECTED] wrote: This is the antenna that was causing interference
Our local Medical Center, Scott and White Memorial has an RV park, and a Med 8 duplex base station, that uses 5 key clicks to operate a telephone patch to the ER Department.At times an interfering signal would cause the patch to go wild. We traced it down to the RV area and suspected an active
This is the antenna that was causing interference :-
http://www.winegard.com/interference.htm
There was also an ARRL article floating around a while back.
Andrew
--
---
KC2EUS - GM1YMI
KC2EUS/R 443.700 MHz 100 Hz PL
IRLP #4925 Elink #9969
www.kc2eus.org
It's RV season again here in Connecticut and I'm expecting a few of these to
roll into the area on their way to the casinos near our sites. The tough part
is that they only tend to stay a short time before they run out of money and
leave. Hard to find.
The problem seems to be worse when the
It seems to me that this group has had discussions before about Winegard TV
pre-amps causing wide-band RF noise. Does anyone know if there is a good
model of TV pre-amp that works for the job intended but does not cause the RF
noise?
thanks
Yahoo! Groups Links
* To visit your group on
JOHN MACKEY wrote:
It seems to me that this group has had discussions before about Winegard TV
pre-amps causing wide-band RF noise. Does anyone know if there is a good
model of TV pre-amp that works for the job intended but does not cause the RF
noise?
thanks
Try Motorola. They are
7 matches
Mail list logo