Has anyone replaced the jumpers on a DB 4062 duplexer with Andrews ¼ inch
hardline?
David Epley, N9CZV
Randolph County Emergency Coordinator
4866N 400E
Winchester, Indiana 47394
Cell765.546.2592
n9...@arrl.net
image001.gif
At 09:39 AM 08/06/09, you wrote:
Has anyone replaced the jumpers on a DB 4062
duplexer with Andrews ¼ inch hardline?
David Epley, N9CZV
Randolph County Emergency Coordinator
4866N 400E
Winchester, Indiana 47394
Cell765.546.2592
n9...@arrl.net
does anybody know what type of lubication is on the plunger of these
cans?
] db 4062 duplexer
does anybody know what type of lubrication is on the plunger of these cans?
hi all, seems i'm trying to get a db 4062 duplexer to work also i have
the tuning info however its the 'c' model and i would like to make it
a 'b' model, which meens i suppose the cable harness lengths are longer
and one set of loops is longer...i've tried to get the info from DB
SPECTRA but
Did you get an answer to this? I've forgotten what the A, B
and C ranges were. I have a DB4062 which is 143 - 156 MHz.
I can measure the cable length next time I am at the site
(should be within a few days). I'm not sure the loops
would be any different between the ranges, but they
KA9FER DB4062 duplexer to change band segments. I have loop
information you need to modify or replace the loops. Its a little
complicated (for me anyway). If you give me a FAX number or snail mail info I
can send the information to you. It won't look pretty or clear because is will
be a
hi all, seems i'm trying to get a db 4062 duplexer to work also i have
the tuning info however its the 'c' model and i would like to make it
a 'b' model, which meens i suppose the cable harness lengths are longer
and one set of loops is longer...i've tried to get the info from DB
SPECTRA but
Hello everyone,
Our club has a set of DB products DB4062 duplexer.
We need to replace the notch caps (one is bad for sure, very erratic
operation when tuning).
Where could we get replacements or is there a substitution?
thanks in advance
de kd4wov
Yahoo! Groups Links
* To visit your
If they are piston trimmers, grab a ICOM for a GE MASTR-II, as long
as it is not a low band version. This is a cheap and readily avalible
source. But you may have to solder the trimmer in place as I don't
think the outer ring on the capacitor is threaded.
On 4/12/05, Tom Tishken
10 matches
Mail list logo