Dear Azam,
The repeaters I bulit are made from 2 VHF GM300 and 1 UHF GM300. I will send
you soon all the diagrams. Everything is working good, I had some little
problems because the 2 VHF radios are 2 CH and the UHF radio is 16 CH. It seems
that the audio inputs and outputs are not quite
...@yahoo.com wrote:
From: sv2hql sv2...@yahoo.com
Subject: [Repeater-Builder] how can i link 2 vhf repeaters?
To: Repeater-Builder@yahoogroups.com
Date: Friday, July 31, 2009, 9:42 AM
hi all a have a big question how it is possible to make a link between two
vhf repeater? both repeaters
hi all a have a big question how it is possible to make a link between
two vhf repeater? both repeaters is yaesu vertex standart!! than
@yahoogroups.com
Subject: [Repeater-Builder] how can i link 2 vhf repeaters?
hi all a have a big question how it is possible to make a link
between two vhf repeater? both repeaters is yaesu vertex standart!! than
Not sure about your country, but in the USA it's easy - just add a UHF
transceiver on each repeater and simple IDers on both, and that's it. I
would use CTCSS/CDCSS on the link, and ID them without transmitting
CTCSS/CDCSS so the IDs are non-existent to the users. You can have a
full-time link
.
Thanks
Peter-N0WRE
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of MCH
Sent: Friday, July 31, 2009 12:28 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] how can i link 2 vhf repeaters
6 matches
Mail list logo
