Kevin,
I just
realized your direct e-mail or anyone's is no longer in the post. I would have
sent this direct.
I
was just going to comment on your clarification. Funny I read your first
post and understood it as you clarified it. It was not until I read your
clarification that I noti
Kevin Custer wrote:
The notch spacing from the pass is determined by the length of the
center conductor in the notch stubs.
After re-reading this, this was not stated as I had intended.
The notch adjustment "range" is determined by the length of center
conductor rod, the exact notch sp
Rob Martin wrote:
All
Today I have
spent a couple of hours
sweeping the cavities and come to the conclusion that they are all high
pass
low reject. (Originally of tx152 & rx158)
Looking at
the cavities 25mhz either
side of my desired frequency RX145.1625Mhz TX 145.7625
any modifications?
Bob G6CKK
-Original Message-
From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Custer
Sent: 03 June 2005 12:51
To:
Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder]
Help with Wacom WP-639 Duplexer
m1ror w
: 03 June 2005 23:27
To:
Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder]
Help with Wacom WP-639 Duplexer
Hi Rob,
Rob Martin wrote:
Kevin
Thanks
for tips, I had download the VHF tune up PDF but not the other pdf.
I was
surprised he had such problems as I had bought two
using RG214.
> I'm assuming all the cables should be ¼ taking into account the velocity
> factor or the cable?
> The cabling might have to be changed to optimize the notch depths, but he
> needs to get a little closer before worrying about that.
>
>
>
>
>
otch depths, but
he needs to get a little closer before worrying about that.
Bob
-Original Message-
From:
Repeater-Builder@yahoogroups.com
[mailto:Repeater-Builder@yahoogroups.com] On Behalf Of Kevin Custer
Sent: 03 June 2005
12:51
To:
Repeater-Builder@yahoogroups
Fraser Stuart
Sent: 03 June 2005 13:51
To:
Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder]
Help with Wacom WP-639 Duplexer
Hi Bob Re
filters if you want a hand give me a call,,
rgds Fraser G8FEZ (in the
book)
m1ror
<[EMAIL PROTECTED]> wrote:
Hel
: [Repeater-Builder]
Help with Wacom WP-639 Duplexer
m1ror wrote:
Hello All This is my second posting but I'm not sure if my first attempt made it to the list. I bought a set of what appear to be good condition Wacom WP-639 (144-174Mhz) Duplexers originally tuned for 156Mhz. A frien
Hi Bob Re filters if you want a hand give me a call,,
rgds Fraser G8FEZ (in the book)m1ror <[EMAIL PROTECTED]> wrote:
Hello AllThis is my second posting but I'm not sure if my first attempt made it to the list.I bought a set of what appear to be good condition Wacom WP-639 (144-174Mhz) Duple
m1ror wrote:
Hello All
This is my second posting but I'm not sure if my first attempt made it
to the list.
I bought a set of what appear to be good condition Wacom WP-639 (144-
174Mhz) Duplexers originally tuned for 156Mhz. A friend has attempted
to align the filters but is having pr
11 matches
Mail list logo