I am using a stock audio card and a wild card for the external controller interface. If I unplug the controller, insert one add-on jumper, and insert the stock repeat card, it works as it did from the factory. I have no idea what jumpers are where but I can look. I remember a jumper specifically on the 10V card had to be changed and I even took a picture of it but it is on my computer at home. If no one posts an answer, I will look through my notes and if necessary go look at the repeater and post back tonight or sometime tomorrow.
Jamey Wright WR4JW Systems Analyst/EDACS Administrator Morgan County EMCD 911 Decatur, AL 256-552-0911 > -----Original Message----- > From: Repeater-Builder@yahoogroups.com [mailto:Repeater- > buil...@yahoogroups.com] On Behalf Of terry_wx3m > Sent: Friday, July 09, 2010 3:00 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] MastrII station stock cards. > > Is there anyone who is running a Mastr II Repeater (not mobile) with > the stock repeater audio board and repeater control board? > > I am looking through manuals and find conflicting info. What jumpers > need to be where on the 10 volt reg card? > > Why would it go into transmit as soon as the repeater control board is > plugged it. > > I am using a TS-32 plug in board. Even with it removed and the squelch > open I don't get any audio through on transmit? > > Thanks > Terry > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >