Re: [Repeater-Builder] PL/CTCSS Filter

built into the TS-64/32 and the ferrotronics units. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (#17) Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] Re: PL/CTCSS Filter

opamp) along with the passive components. Just putting one together as we speak, so I can see how much difference there is between it and the TS-32 :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (#17) Your use of Yahoo! Groups is subject to http

Re: [Repeater-Builder] TS-64P CTCSS question

. Just use the pin 5 output directly. I have this feeding a RC-100 controller (for COS input), and also a FET transistor which controls a relay which controls the PL going to the exciter. Works great. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17

[Repeater-Builder] SO-8 Power MOSFETS?

on the GATE) the ON resistance between the Drain and Source is less than 0.1 Ohm. This equates to very little heat dissipation at full rated current. Just thought I'd see if any of members would like some before they go on Ebay. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada

[Repeater-Builder] Fiberglass rod

bought were about 8 long and red in colour, but any length/colour would be appreciated. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17) Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder

Re: [Repeater-Builder] Broken/ stuck slugs - was Fiberglass rod

. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17) Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use

Re: [Repeater-Builder] Fiberglass rod

a 14 pipe wrench on the dowel :) The secret in using the fiberglass rod is the use of the Dremel tool. I have a selection of small grinding wheels which makes every conceivable shape possible. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17

RE: [Repeater-Builder] Fiberglass rod

for the tip Ron Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17) Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL

RE: [Repeater-Builder] Fiberglass rod

to you. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Way to go Matt! (NASCAR #17) Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your

[Repeater-Builder] TXRX in Canada.

Just FYI... TxRx is a leading manufacturer of RF Systems Products serving the Wireless, Public Safety, Military and Government market. TxRx has appointed Navair Inc. its exclusive Canadian dealer. Their website is www.navair.ca Tedd Doda, VE3TJD Lazer Audio and Electronics Baden

Re: [Repeater-Builder] MCC RC-1000V to Ge Mpro UHF

and audio levels. One other thing Russell, when you reply, could you break your reply into paragraphs? I find your emails really hard to read (I know it's just me!). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web

Re: [Repeater-Builder] Kenwood Tuneup info

On Mon, 22 Mar 2004 13:31:12 -0600, Dennis Wieck wrote: TKR-720 and TK-830 Any idea if the TKR-820 manual would help you out with the 720? I have the TKR-820 manual and could snap a few pictures of the setup section. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada

[Repeater-Builder] Free Preamp Encloser.

.jpg http://www.sentex.ca/tedds_place/preamp-2.jpg http://www.sentex.ca/tedds_place/preamp-3.jpg All I ask for is the shipping costs...US$6.00 to anywhere in Canada and the lower 48. Paypal ONLY..I really get tired of the money orders that never show up. Tedd Doda, VE3TJD Lazer Audio

Re: [Repeater-Builder] Free Preamp Encloser.

On Wed, 24 Mar 2004 11:50:54 -0400, Bruce Harvey wrote: Tedd I would be interested in getting that enclosure from you. Sorry Bruce, the preamp is spoken for. Budd N7EOJ is the new owner. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links

Re: [Repeater-Builder] Free Preamp Encloser.

, but that's all I know. I got boxes of stuff from them, and have a bunch more to either give away or try to peddle on Ebay. It would take me weeks to inventory all of it so I just might make some box lots. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups

Re: [Repeater-Builder] UHF link

On Mon, 29 Mar 2004 09:31:02 -0500, russ wrote: We are going to change it from 420 MHz to 927 MHz over the week end of April 4th. Hi Russ: What are you using for radios? Also, any foreseen problems from cordless phones? Thanks, Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario

Re: [Repeater-Builder] Ringos, Diamond, Comet Hustler Antennas

doubtful. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use

Re: [Repeater-Builder] Looking for a mobile duplexer

On Sun, 11 Apr 2004 19:51:14 -0500, Mike wrote: Also, cheap as possible for 50-75 watts rating. VHF, UHF, 6 Meters(!) ??? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com

[Repeater-Builder] DTMF decoder

Electronics and the board was made in Canada. I can just think of the possibilities :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe

Re: [Repeater-Builder] Re: DTMF decoder

hoping that it can be configured for assorted key strokes for activation. Still no info on the company :( Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater

Re: [Repeater-Builder] Receiver Sensitivity

On Mon, 19 Apr 2004 12:05:19 -, dy3lmk143_13mhz wrote: is it Receiver A? If they were both measured at 12dB Sinad, yes. The lower the number means that it takes less signal to achieve the required spec (12dB Sinad) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada

Re: [Repeater-Builder] WTB: 19 Rack VHF 146 MHz Continious Duty Amplifier

. Probably cost a fortune to ship to North Judson :) 4 watts in for max output. Located about 60 miles South-West of Toronto. Let me know if you are interested, or need pictures of it. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit

Re: [Repeater-Builder] Duty Cycle

is probably high (2.4 hours a day?). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL

Re: [Repeater-Builder] Re: Duty Cycle

using them at 20 watts. They would and do work fine. Sometimes you have to look at what the application is before making up your mind. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] Re: Duty Cycle

this. What type of use (public safety, business, GMRS-I think that's what you call it!, etc) is the main tenant? Any type of public safety would mandate a 100% duty cycle I would think. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your

RE: [Repeater-Builder] Radio Mounts

radio installations. Check out your closest alarm installer, they probably have many not being used..for free. Only drawback was that they are silver in colour, but a can of black spray paint takes care of that. How many do you need? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario

Re: [Repeater-Builder] How to Buy a New Repeater Station: Radio Buying 101

Mustang which I still have. Called 6 dealers, 3 local and 3 in Toronto. One of the dealers in Toronto got the deal by a margin of 3 or 4 hundred dollars. Doesn't sound like much but the NEW Mustang only cost me $4200 back in '78 :) It works for a lot of things. Tedd Doda, VE3TJD Lazer Audio

[Repeater-Builder] Monster Heatsinks

couple days before the pictures are available. I also have a couple 88 split (450 to 470) Mastr Exec II mobiles that I'm parting out. Let me know what you need. I'll only ask once, then they go to Ebay. PLEASE reply off list. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario

Re: [Repeater-Builder] Monster Heatsinks

On Wed, 14 Jul 2004 19:04:23 -0400 (EDT), Tedd Doda wrote: couple days before the pictures are available. Here are the pictures of the heatsinks. Picture #5 shows that there is a slight curve width wise to the rear of the heatsink. Picture #6 shows a mating plate that was used to join the 2

Re: [Repeater-Builder] Re: OT - DC charger with auto cutoff

higher power at an idle, not lower. There is only so much you can do with a stock alternator casing and stator, but some of the aftermarket units are incredible. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

[Repeater-Builder] RC-96 EEPROM

look good, and are not being loaded down. The data lines do PULSE though. Good data for about 2 seconds, then nothing (logic zero) for about a second. If there is any base data for the EEPROM, would anyone have it in a bin file for version 5.2? Thanks, Tedd Doda, VE3TJD Lazer Audio

Re: [Repeater-Builder] Re: RC-96 EEPROM

if you've had problems with it in the past. I have a bunch of the 2864, as well as the 27011 in new condition (and noI won't sell any!). If you could read one of your '64's Skipp and send me the BIN file, I would appreciate it, even if it has been programmed (callsign, macros, etc). Tedd

Re: [Repeater-Builder] Wanted Radio Communications Service Monitor

of them, not an easy job for an amateur. Mine also went up in smoke some 6 years ago. It's been running on an AT computer power supply since! All the voltages are available and at $25, much cheaper than the $600 they wanted for the original. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden

Re: [Repeater-Builder] Wanted Radio Communications Service Monitor

On Thu, 19 Aug 2004 07:50:15 -0500, Ed Folta wrote: I have an inventory of 1500 and 1600 among others. Interested parties contact me at Whole units Ed, or parts as well? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group

[Repeater-Builder] For Auction: TQ-2310 Suitcase Programmer

Hi Guys: Just thought I let you know that I have a near mint TQ-2310 programmer on Ebay: Item # 3834819071 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=3834819071 Thanks, Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your

Re: [Repeater-Builder] RC-96 EEPROM

programmer works on all the other eproms I check this weekend I'm starting to think that the 6264 is slightly different from a standard 2864, but the 2864 works in it's place?? This was a private email to me, so I hope you don't mind me sending it to the list Bryon. Tedd Doda, VE3TJD Lazer Audio

[Repeater-Builder] RE: RC-96 EEPROM

be loaded into the 6264 if it looses it's data when unplugged? As the RC-96 doesn't have any backup battery, how is the data saved? Cross-posted to the ACC list. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] Re: Astron Supply Help

On Thu, 02 Sep 2004 11:35:29 -0400, Jim B. wrote: umm-heat sink grease (thermal compound) is not clear. It can be. The common stuff is white, but I've seen the clear variation on lots of industrial equipment (DC-DC motor controllers for example) used for their FET's and SCR's. Tedd Doda

Re: [Repeater-Builder] Mitrek Full Duplex 110 watt..?

UHF mobile Mitrek and had a hard time running 40 watts with the stock heatsink (yes, having a couple fans on it) as a repeater. You have a good point though Skipp. Maybe that's why I was blowing up front end (mixer) FET's every couple months in the Mitrek :) Tedd Doda, VE3TJD Lazer Audio

RE: [Repeater-Builder] duplicate posts

On Wed, 29 Sep 2004 08:00:08 -0400, Ted Leonard wrote: I am getting 3 copies of each post as well. Just one copy of each message here. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] Re: controller madness (whiz' bang - sparkle!)

and Windstar :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use

Re: [Repeater-Builder] Re: 802.11b wireless

of the hardware? Does this have to be done by the manufacturer or can it be done by the user. Please recommend any hardware that can be made to work. Thanks, Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] Re: 802.11b wireless

://tranzeo.com/index.php?section_id=10 I've sent them an email to find out if the hardware can be made to work in the Ham band portion of the band. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] Re: 802.11b wireless

On Wed, 8 Dec 2004 20:24:17 -0500, Richard D. Reese wrote: Channels 1 through 8 fall in the Amateur band of 2390 to 2450 GHz. Thanks for clearing that up Richard. I was under the impression that we had some frequencies that were not available for the general public. Tedd Doda, VE3TJD Lazer

Re: [Repeater-Builder] Re: Speaker Level Mixing

On Fri, 31 Dec 2004 15:02:43 -0600, Al Wolfe wrote: Once upon a time you could buy 6 X 9 speakers with two voice coils, Just make sure your radios filter out the PL! I can just imagine what a 100Hz tone would sound like through a 6x9 :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden

Re: *****SPAM***** Re: [Repeater-Builder] MDM RADIO - Grand moving sale

be moving South, as there is no snow on the ground, hi! Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email

Re: [Repeater-Builder] MDM RADIO - Grand moving sale

On Thu, 6 Jan 2005 15:01:24 -0800 (PST), TGundo 2003 wrote: He has 10,000 sq ft of stuff crammed into his Hey Ted or Tom.can you take some digital pictures (before and after) so the rest of us can drool. BTW Ted, where are you moving to? Tedd Doda, VE3TJD Lazer Audio and Electronics

[Repeater-Builder] Re: UPS 4sale

. Batteries cost me CAN$400, and the UPS cost me $350 (bought used for Y2K). Asking CAN$550. For a picture: http://www.sentex.net/tedds_place/UPS2200.jpg Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] Powering the Repeater With Marine Batteries/ UPS

about 2 minutes, as there is a HUGE generator that powers everything at the site. Lucky I guess :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder

Re: [Repeater-Builder] Re: Powering the Repeater With Marine Batteries/ UPS

is so heavy). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use

Re: [Repeater-Builder] Re: controller madness (whiz' bang - sparkle!)

and Windstar :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use

[Repeater-Builder] Re: UPS 4sale

. Batteries cost me CAN$400, and the UPS cost me $350 (bought used for Y2K). Asking CAN$550. For a picture: http://www.sentex.net/tedds_place/UPS2200.jpg Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http

Re: [Repeater-Builder] Powering the Repeater With Marine Batteries/ UPS

about 2 minutes, as there is a HUGE generator that powers everything at the site. Lucky I guess :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder

Re: [Repeater-Builder] Help! Need information

could always use VOX. Did you plan on tapping inside the radio for CAS and bringing it out through one of the unused pins? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group

Re: [Repeater-Builder] GE mastr II UHF and rc-210

it. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups

Re: [Repeater-Builder] GE mastr II UHF and rc-210

one port to be transfered over to port one. Don't forget to reset all your link commands, unless you have them setup in macro one (they get reset during this controller reset). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your

Re: [Repeater-Builder] Dual Band Handie Talkie

available. The early ones went from 150-174 and 450-470, and the units like mine went from 136-174 and 420-470. They had 32 channels which were not limited to so many VHF and UHF, so you could have 20 UHF and 10 VHF if you like. I think Ebay will be the only place you will find one. Tedd Doda, VE3TJD

Re: [Repeater-Builder] Delay line chip (DAD4096) for Kendecom Mark 4

I moved. I'll dig into the boxes later this weekend and let you know. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group

Re: [Repeater-Builder] Re: Delay line chip (DAD4096) for Kendecom Mark 4

On Sat, 2 Apr 2005 11:59:27 -0500, Chuck Kelsey wrote: I still can't find stuff years later. This is the first time in 20 years... I won't be doing this again any time soon :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit

Re: [Repeater-Builder] Andrew Heliax LDF1-50

RX and TX. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo

Re: [Repeater-Builder] UHF connectors.

like to get rid of the adaptors :) I came across about 50 brand new 3 foot SuperFlex jumpers complete with installed connectors and would like to use them up. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] Re: UHF connectors.

On Wed, 06 Apr 2005 02:24:27 -, greenfin2002 wrote: ted are any of the jumpers for sale? Sure, how many do you need? They are 35 1/2 tip to tip. I'm guessing that $15 a piece is fair, plus shipping. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo

Re: [Repeater-Builder] Re: UHF connectors.

On Wed, 06 Apr 2005 09:05:28 -0400 (EDT), Tedd Doda wrote: Sure, how many do Sorry about that guys. was suppose to go privately :( Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] RP4020 Parts

to the heatsink in the middle of the chassis. Should be available from RF Parts. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group

Re: [Repeater-Builder] Re: Xtal source

? We have 4 repeater sites, and they are all in temperature controlled rooms. In these cases, would you agree that just netting the ICOMs in their operating enviroment would be sufficient, using non-compensated ICOMs? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada

Re: [Repeater-Builder] Where can I find cables

up with 1/2 superflex, I have about 20 30 jumpers with N males on both ends. If you can use them, I'll see if I can get some more. These are brand new, never put into service. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group

Re: [Repeater-Builder] GE Phoenix SX for Remote Base of RC-100

On Wed, 18 May 2005 11:57:20 -0400 (EDT), KB5ILY - Travis W. Burton wrote: however am having trouble locating COS on either. Do you want it to follow PL, or just COR? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group

Re: [Repeater-Builder] GE suitcase programmer TQ2310

more than half of the wires were broken. These modules are designed to be taken apart for eprom swapping but due to their age, the wires work harden then break. Are all the other support chips installed? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups

RE: [Repeater-Builder] GE suitcase programmer TQ2310

the manual, making repairs is difficult at best. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email

RE: [Repeater-Builder] GE suitcase programmer TQ2310

cables yet? I hope to be able to take a closer look at it tomorrow and maybe check some voltage points, connections, wires and such. And compare them with what? Do you have the manual? I don't have a scanner, but I could take some digital pictures of the modules layout if that would help. Tedd

Re: [Repeater-Builder] IFR 1200/A Service Monitor

or the other. Or if I'm in a hurry, I use my HP frequency counter and a sniffer (indirectly) stuck into the PA chain. Any market for a well used 1500..I think it's about time to upgrade :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit

[Repeater-Builder] Lightning hit - LF: Mastr II 25 Watt PA

Hi Guys: During an intense lightning storm this past Saturday, my 100 watt Mastr II UHF repeater (real repeater, not a mobile) blew the final transistor (4242P3) on the 25 watt board. Either looking for a replacement transistor, or a complete board. Thanks, Tedd Doda, VE3TJD Lazer Audio

Re: [Repeater-Builder] Help Standard C5718DA

send me a picture of the radio? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED

Re: [Repeater-Builder] Help Standard C5718DA

On Wed, 17 Aug 2005 20:52:53 -0400, Joe C wrote: The radio itself is just an enclosed box with connectors. Hi Joe: I now know the one you're talking about. I have no leads on the manual for itsorry. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo

Re: [Repeater-Builder] Re: had a little power supply trouble the otherday...

On Tue, 10 Jan 2006 03:38:37 -, fire22pa wrote: Most Sub station transformers like the one in the video which form the looks of the bushing size is at least Whew..the period key is 2 to the right of the M key :) Sorry, but I got out of breath just reading it. Tedd Doda, VE3TJD

RE: [Repeater-Builder] Re: had a little power supply trouble the otherday...

with their video cameras. I think we saw just the final few minutes of the occurrence and noting the well groomed trees, it wasn't too far away from some homes. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] Western Radio Repeater Alignment

and will look around this weekend. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED

[Repeater-Builder] Cheap Tunnel Heatsink

) and about 2 square. Pictures: http://www.ve3tjd.com/pictures/tech%20stuff/ Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from

Re: [Repeater-Builder] More (mostly) free stuff.

On Wed, 22 Mar 2006 08:43:18 -0500, Mark A. Holman wrote: did not see anything free there The items were free, but the shipping wasn't and shouldn't be :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

Re: [Repeater-Builder] FCC to Deregulate Amateur Radio by 2008

On Sat, 01 Apr 2006 19:27:01 -, n8rqu wrote: Look for more information on this late-breaking news story as it becomes available. April fools(?). I sure hope so :( Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group

Re: [Repeater-Builder] OT - Jeep Cherokee

the fiberglass cap? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use

Re: [Repeater-Builder] Electronics and Radio types...

to a flea market, never, never, never, bring home more than you took to sell. I'm having a real hard time with that one myself :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group

Re: [Repeater-Builder] 6 meter low band Duplexers

with cables etc for V2 IRLP board V2 IRLP board Asking $300 plus shipping. Will split. Paypal or check (please allow time for clearing before items ships if paying by check). Shipping from NJ-07869 Thanks de Mark G7LTT/KC2ENI Tedd Doda, VE3TJD Lazer Audio

Re: [Repeater-Builder] Help with GE TMX-1000

the complete service manual for the TMX-1000, but just like normal GE stuff, is chock full of multi-page foldouts. Copying or scanning would be a major PITA :) If you want to get rid of some, give me a shout! Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups

RE: [Repeater-Builder] Help with GE TMX-1000

. Are wou willing to send me you manual, I can duplicate for ?20.00$ Sorry Eric. It took me 4 or 5 years to find the complete manual and it's not leaving my side. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go

RE: [Repeater-Builder] Help with GE TMX-1000

channels (the TMX1000 will hold 99 conventional channel). Limit it to 4 or 5. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group

Re: [Repeater-Builder] Good mobile for solar site

On Tue, 16 May 2006 17:16:46 -, ve7ltd wrote: Has anyone ever used a handheld for such a task? If so, what would you suggest? What Band, and bandwidth do you need Dave? For high speed packet, the Kantronics D4-10 is an awesome radio for UHF and is adjustable from 1 watt to 10 watts. Tedd

Re: [Repeater-Builder] Astron power supply question

it. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups

[Repeater-Builder] Internal cables for IC-RP4020 Repeater

harnesses from a scraped 4020? Trying to patch this thing would take hours and hours of work (YES, it's that bad). I would repair it, but many of the cable use shielded cables which HAVE to get replaced. Thanks for any and all suggestions. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario

Re: [Repeater-Builder] GE MLS

. Get yourself a couple Delta's for that :) Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

RE: [Repeater-Builder] GE MLS

by any cheap E/EE programmer. Creating the BIN file is another story.. A Ham in Quebec needed the BIN file for an MLS about a week ago, so I burned a 2816 using the TQ2310, read it, then emailed him the BIN file. Whole process took less than 10 minutes :) Tedd Doda, VE3TJD Lazer Audio

Re: [Repeater-Builder] OT- Activity Level On Ham Repeaters Way Down In My Area

a blast! The uptime for the system would easily exceed all the individual repeaters put together. Why? Larger audience. The chances of putting out your call and having someone actually there to reply is much greater. Just my $0.02 worth... Tedd Doda, VE3TJD Lazer Audio and Electronics Baden

[Repeater-Builder] Icom repeater parts?

guess the club will have to fork over the $US125 from RF Parts. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

Re: [Repeater-Builder] Re: Power-Pole connectors NOT for power

contacts on equipment that pushes the current rating of these to the limit (and then some). Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

Re: [Repeater-Builder] Icom rp4020

On Thu, 29 Mar 2007 17:00:45 -0500 (EST), Tedd Doda wrote: Find the frequency data page attached. Sorry, meant to send it directly to Jed :( Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

Re: [Repeater-Builder] Motorola MICOR Receiver Audio Squelch Board

. Dave: I have a brand new Motorola squelch card here (with the popular M7716 IC on it), which also has a 67A08 chip on it. The boards part number is TRN-8406A. Let me know if that will work for you. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal

Re: [Repeater-Builder] Mini - UHF Connector

. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

Re: [Repeater-Builder] GE Phoenix SX Replacement Coils

On Sun, 13 May 2007 02:18:40 -, dgrapach wrote: I am looking for replacement coils for a GE Phoenix SX radio. They are L08 and L502. Both are made by Toko electronics. I have lots of Phoenix parts. Which band are they for (if it makes any difference). Tedd Doda, VE3TJD Lazer Audio

RE: [Repeater-Builder] Re: UPS

that doesn't use 12 volts. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

[Repeater-Builder] FS: UHF Deltas - Chassis Only

two as a repeater. Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada www.ve3tjd.com (personal) www.eraradio.ca (Linked repeater system)

  1   2   >