[Repeater-Builder] R100 Programming

[David]

Does anyone have any info or manual to assist in a Motorola R100 RT100 
repeater or could possibly answer a few questions. I have rss for v1.9 
for the R100 and have been able to change the freq and tune the unit 
now but cannot find where in the rss the PL or DPL is programmed. If 
you are familiar with V1.9, it is not like the common moto rss 
software. Thanks.

RE: [Repeater-Builder] R100 Programming

[Eric Lemmon]

David,

You cannot program or change the CTCSS (PL) tone unless your R100 is
equipped with the PL Command Board.  If your unit is equipped with the CDCSS
(DPL) or the carrier squelch command board, you're out of luck.  The R100
service manual is here:
www.repeater-builder.com/motorola/r100/uhf-r100-service-manual-6881078e15-o
.pdf
or at this TinyURL:
http://tinyurl.com/yvzn2s

73, Eric Lemmon WB6FLY
 

-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of David
Sent: Tuesday, May 27, 2008 11:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] R100 Programming

Does anyone have any info or manual to assist in a Motorola R100 RT100 
repeater or could possibly answer a few questions. I have rss for v1.9 
for the R100 and have been able to change the freq and tune the unit 
now but cannot find where in the rss the PL or DPL is programmed. If 
you are familiar with V1.9, it is not like the common moto rss 
software. Thanks.

[Repeater-Builder] R100 Programming

[Tom Parker]

Hello to the group,

Does anyone have any information on programming the PL or DPL codes
with the Motorola RSS for the R100 repeater? Looks like it may be in
HEX, but not sure. Is there a chart or something?

Thanks,

thp















  




  
  
  YAHOO! GROUPS LINKS



  Visit your group "Repeater-Builder" on the web.
  To unsubscribe from this group, send an email to:[EMAIL PROTECTED]
  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.