Many early models of the GR1225 desktop repeater were delivered with RG-58 cable in the internal duplexer harnesses, which led to desensing and lockup. The problem becomes worse if carrier squelch is used. I was able to cure that problem by fabricating new harnesses with RG400 double-shielded cable.
What are your RX and TX frequencies, and how much power is coming out of the transmit connector? 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of k6kusman Sent: Sunday, May 23, 2010 2:23 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Moto GR-1225 Hello all. I have a GR1225 that seems to work just fine except for one lil problem.. It will quite often stay keyed up after the signal or local mic is released. The only way to clear it is to shut it down and turn it back on.. Then it's good for like 10 sec's and does it again. It won't do it by itself but only after being keyed.. Any ideas?