. Recatalog fails - as it sits 'building catalog' 'Completed 0 files zero KB' until I stop it
ASPI is installed.
I suspect hardware issues but NT backup works(!)
Any ideas on what to try next would be very much appreciated.
Thanks,
Rob Davies
TSG-SSO COMPAQ
(Technical Services Group - Server
), and had to remove it 'till I can upgrade
the AV later this week. It also caused a nasty BSOD.
--Ben
Rob Davies [EMAIL PROTECTED] on 12/04/2000 02:54:22 PM
Please respond to retro-talk [EMAIL PROTECTED]
To: 'retro-talk' [EMAIL PROTECTED]
cc: (bcc: Ben Eastwood/HMG/Wilson Learning/US)
Subject
Title: RE: Newcomer Questions
I'd probably go DDS-4, then buy a second DDS-4 unit when needed, as you add more clients. Retro intelligently uses chained tape drives, writing to one, then the other. Use an incremental backup process.
Recent previous Retro talks had discussions of relative
Title: RE: Aarrggh! 519 error...-Spanning Tree Protocol?
If it is the Spanning Tree Protocol causing the problem then you have two alternative courses of action -
1. Disable it entirely, or
2. Enable Portfast at the Switch
The STP problem only affects Appletalk on the G3's G4's, because
on a fresh tape.
If the problem remains, get the heads checked.
Rob Davies
TSG-NDSA
(Technical Services Group - Non Datacentre Server Admin)
CWO
-Original Message-
From: Church Initiative WebMaster [mailto:[EMAIL PROTECTED]]
Sent: Friday, 19 May 2000 5:19
To: retro-talk
Subject: Re