Martin,
I think you have already read this page:
http://docs.basho.com/riakcs/latest/cookbooks/configuration/Configuring-Riak/#Setting-up-the-Proper-Riak-Backend
As it says, you can use "add_paths" to set load path.
--
Shunichi Shinohara
Basho Japan KK
On Wed, Sep 11, 2013 at 2:05 AM, Martin Al
Martin,
Thank you for more information.
I found a mis-configuration of riak's app.config. The backend of riak for
Riak CS is riak_cs_kv_multi_backend (look out for _cs_). This is the custom
riak_kv backend for Riak CS. The error of "s3cmd ls" was caused by this.
As for MB boundary stop, the issue
Martin,This may not be a silver bullet for this issue but as far as version compatibility between Riak and Riak CS goes we have a chart here:http://docs.basho.com/riakcs/latest/cookbooks/Version-Compatibility/I'd highly recommend upgrading your Riak CS as there are some known issues with the 1.3.x
Hi Martin,
Thank you for sharing detailed information.
On Wed, Sep 4, 2013 at 11:20 PM, Martin Alpers wrote:
> * downloading from the frist node stopped at exactly 3MB, i.e. 3145728 bytes
> * downloading from the second node stopped at exactly 22MB
> [snip]
I also tried your URL and found sudde
Hello everyone on the list,
I run a test cluster for RiakCS, running on three nodes, mostly using defaults.
Mostly meaning that all modifications were necessary to make RiakCS run, but no
tweaks have taken place yet.
Now after figuring out how to make objects publicly available we tried to
down