I recently found myself tasked with getting Rivendell 2.16.0 to talk to a
Broadcast Tools 16x2 switcher.
The 16x2 is a passive switcher lacking the mix mode of some other BT
switchers. An input can be switched to one or both outputs, but no more
than one input at a time can go to any
Hi, I am trying to use the audio switcher now that I have two audio cards.
I had it working when I was using one audio card (routing input to output
on that card), but now I have two audio cards and want to route the input
of one card to the output of another. Without using jack, is there a
Hi,
Both audio cards need to be showing up under rdadmin -- Manage Hosts
-- Audio Resources.
Then set up another audio adapter in your switcher matrix: RDAdmin --
Manage Hosts -- Switchers GPIO
Set up Local Audio Adapter, select the new card number, the number of
inputs and outputs it has, you
I recently set up Rivendell with the
'local audio' switcher to play a live
internet broadcast. The issue is, when
the switcher is enabled/configured,
rdAirplay crashes every time a change
is made in rdLogedit. Please help?
Sometimes it's signal 11, other times
it just shuts down.
I have a client who has a station, WSRO, serving the local Brazilian
community. He sells one-hour blocks of time to programmers, some of whom
come to the station to do their shows live while others do their shows
from other locations via Barix boxes.
A Rivendell system (named nerodia) is
On Jan 18, 2014, at 09:13 15, Rob Landry 41001...@interpring.com wrote:
My question is this: how does the rmlsend mechanism handle a situation where
two commands arrive at the same time? Is the execution of one delayed until
the other has completed? Or is it possible that the two may run at
On Sat, 18 Jan 2014, Fred Gleason wrote:
I’ve seen this happen at other sites with that particular model. The
work-around was to reduce the baud rate of the serial connection, which
seemed to settle things down.
What baud rate do you recommend?
Thanks,
Rob
