> Hi there... i need help with a rosegarden feature... rosegarden at the > start of a segment playback sends "controller" signals to midi out (all > channels), for example: > > 01:06:39.360 Ch 2, Ctrl 121, Val 0 > 01:06:39.360 Ch 2, Ctrl 10, Val 64 > 01:06:39.360 Ch 2, Ctrl 93, Val 0 > 01:06:39.360 Ch 2, Ctrl 7, Val 100 > 01:06:39.360 Ch 2, Ctrl 91, Val 0 > > i think those signals are for setup the volume,pan,reverb,chorus, but i > really don't need them, and is very annoing how rosegarden changes > synths paramether... there's a way to avoid sending these particular > signals at the beginning of a segment playback, while keeping the > signals inserted as manual event (in the event list editor)?
Depends on exactly what you want. First, there's no way for those controllers to automatically put themselves into the event list. You can manually put them there. Easiest way is to make a ruler for each controller, select the first note, use Controllers -> Place controller once for each ruler, and set them as you like. Once that's done, "auto" will always send those controllers and not some other values. By "some other values", I mean the IPB values. From what you say, I'm not sure whether you have set the IPB values the way you want them - sounds like it's annoying you by setting controllers back to IPB values? Tom Breton (Tehom) ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ Rosegarden-user mailing list Rosegarden-user@lists.sourceforge.net - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user