On 25/06/2020 13:18, Madhurananda Pahar via rsync wrote:
> Hello everybody,
>
> I am having a funny problem while using rsync as a tool to
> back-up my files:
>
> [sender] expand file_list pointer array to 524288 bytes, did move.
>
> I am just wondering if you had this issue before
: rsync error: error allocating core memory buffers
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
You should not be using rsync's --checksum during routine backups. It
is only for very rare use cases not every backup run.
On 04/09/2015 04:43 AM, Hans Kraus wrote:
Hi,
I've configured
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
You should not be using rsync's --checksum during routine backups. It
is only for very rare use cases not every backup run.
On 04/09/2015 04:43 AM, Hans Kraus wrote:
Hi,
I've configured 'backuppc' to transfer files via rsyncd, with
enabled
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I don't know what that error means as it is non-specific. However
3.0.4 is very old. Try upgrading your rsync and see if the problem
goes away.
On 08/10/2014 07:08 AM, jerrycww...@hsbc.com.hk wrote:
Does anyone know what this message is about? I
I have some general remarks about the problem; I hope Wayne will have
more specific ideas on how to debug it.
On Sun, 2009-01-11 at 13:33 +0100, Ernst J. Oud wrote:
rsync -vrpth --stats --progress --log-file=/nslu2/rsync.log
--log-file-format=%t %i %n%L
--include-from=/nslu2/rsync-files
On Mon, 2008-10-13 at 11:51 -0400, Naveen Sajjan wrote:
I am using cwrsync ver 2.1.5 over SSH to connect to
[EMAIL PROTECTED] and facing some problems and not sure how to go
about it. Below is the full text of the result when I run the batch
file. Was wondering if anyone has seen any similar
Naveen, please CC rsync@lists.samba.org so that others can help you and
your messages are archived for others' future benefit.
On Mon, 2008-10-13 at 15:47 -0400, Naveen Sajjan wrote:
I just used the rsync -av hostname and I was able to connect.
hmm...Didn't seem to use SSH.
I guess that means
@lists.samba.org
Subject
08/26/2008 08:02 Re: Rsync Error Code 23?
PM
On Wed, 2008-08-27 at 10:45 -0700, [EMAIL PROTECTED] wrote:
Thank you for your response Matt.
On the source server, /snapshots/fs/tce_data/pc-software/pc is a symlink
to the directory /snapshots/fs/tce_data/pc.
On the destination server,
/drp/fmttcesrv1/snapshots/fs/tce_data/pc-software is
On Tue, 2008-08-26 at 16:29 -0700, [EMAIL PROTECTED] wrote:
Regarding rsync error code 23 could the below delete_file: ...file
exist failures cause the error code 23? Or, how can I resolve this as
these are the only errors I see in the log files.
Thank you!
START Tue Aug 26 11:10:12 PDT
Wondering if this cpould happen if a file or a directory have a space on it?
Something like Nouveau\ dossier?
Thanx!
Manuel Kissoyan wrote:
Hi,
We have this backup server running for a long time without problem, it
run the rsync command from cron and connect to many other servers
On Wed, Jun 04, 2008 at 05:25:06PM -0300, Manuel Kissoyan wrote:
rsync error: timeout in data send/receive (code 30) at io.c(233)
[sender=3.0.0pre2]
Are you using a --timeout option or a timeout parameter in a daemon
config? If so, try increasing that value. If not, you should check to
see
Hi Wayne,
Yes, im using timeout=500 in the cron/command as we were using before
the crash and also as im using in the other servers.
Ill do the strace to see what is happening and ill post here. btw, what
exactly do you mean when you say to attach it of each of the 3 programs?
Thank you in
Hi Wayne,
Here is the strace result.
This is the one from the server where we are running the rsync command
and where we backup the other server:
---
select(4, [3], [], NULL, {47, 471000}) = 0 (Timeout)
select(4, [3], [], NULL, {60, 0}) = 0 (Timeout)
select(4, [3], [], NULL, {60, 0})
On Fri, Jun 06, 2008 at 04:14:45PM -0300, Manuel Kissoyan wrote:
This is the one from the server where we are running the rsync command
and where we backup the other server:
That's just the client. You also need to see what the server is doing.
You should attach to all 3 rsync processes, 2 on
ok, here are the last lines from the receiving side:
-
time(NULL) = 1212801884
select(6, [5], [], NULL, {60, 0}) = 0 (Timeout)
time(NULL) = 1212801944
select(6, [5], [], NULL, {60, 0}) = 0 (Timeout)
time(NULL)
On Thu, May 08, 2008 at 08:59:41AM -0700, arguellodw wrote:
rsync error: timeout in data send/receive (code 30) at
/home/lapo/packaging/tmp/rsync-2.6.3/io.c(153)
You are reaching your idle-time timeout. Either make it larger (e.g.
--timeout=360) or upgrade to a newer rsync version that has
As an update to this problem, it seems that rsync has no problem
updating/transferring the directory tree (every day, new data is added in a
date directory structure at the remote site). So when I rsync, I get the
new folders, but the error message always pops up before data files are
On Thu, Apr 17, 2008 at 12:57:27PM -0600, Kenneth Seal wrote:
I have tried running my script in verbose mode -vv but I really don't
want to read all 1000+ lines of output to look for the error code.
Errors should be output to stderr, and it isn't required that you have
even one -v specified to
On Tue, 2008-04-08 at 21:27 -0600, Kenneth Seal wrote:
In my case, rsync displays the error code rsync error: some files
could not be transferred (code 23) and it kills my script. Do you
have any advice on how would I go about writing, researching etc. a
script to tell rsync to ignore
On Apr 8, 2008, at 11:27 PM, Kenneth Seal [EMAIL PROTECTED] wrote:
Hi Wayne,
I read your thread online at http://lists.samba.org/archive/rsync/2005-June/012847.html
and I am having a similar problem.
In my case, rsync displays the error code rsync error: some files
could not be
Log file is likely locked.
- Original Message -
From: Kaushal Shriyan [EMAIL PROTECTED]
hi
I have the script http://pastebin.com/d4b062d28 and the roots cron
entry are as below
30 2 * * * su sms /usr/local/bin/testrsync_mysql.sh
I am getting the below error
building file list ...
On Fri, Apr 4, 2008 at 4:51 PM, Steven Hartland [EMAIL PROTECTED] wrote:
Log file is likely locked.
- Original Message - From: Kaushal Shriyan
[EMAIL PROTECTED]
hi
I have the script http://pastebin.com/d4b062d28 and the roots cron
entry are as below
30 2 * * * su sms
On Fri, 4 Apr 2008 17:11:25 +0530 Kaushal Shriyan
[EMAIL PROTECTED] wrote:
hi steven
I am getting the below error now
building file list ... rsync: pop_dir /root failed: Permission
denied (13) rsync error: errors selecting input/output files, dirs
(code 3) at flist.c(1356) [sender=2.6.9]
On Thu, 2008-02-07 at 20:09 +0100, Edmond Dantes wrote:
Running rsync on our intradisk Xscale Arm BigEndian MiniServer (NAS)
System is causing some problems running
on special character files and crashing.
Rsync is syncing running on a mounted samba share, syncing to the local
disk. It is
I noticed it is working with the rysnc-3.0.0-pre5, or at least the protocol
of it. Is it possible to use that protocol for the curren stable release.
Greetings Johan
Johan Huysmans wrote:
whoops forgot to mention the error i receive ;)
This message appears on the client side:
rsync:
On Wed, 2007-11-28 at 02:29 -0800, Johan Huysmans wrote:
I noticed it is working with the rysnc-3.0.0-pre5, or at least the protocol
of it. Is it possible to use that protocol for the curren stable release.
No, the protocol is new in rsync-3.0.0* .
Matt
--
To unsubscribe or change options:
On Thu, 2007-11-15 at 11:31 +0100, Daniel Maher wrote:
On Thu, 2007-11-15 at 22:55 +1300, Morgan Read wrote:
[EMAIL PROTECTED] ~]$ rsync -a -X -A -z -v /home/morgan/Documents
192.168.1.30:/home/morgan/Documents
[EMAIL PROTECTED]'s password:
building file list ... done
rsync:
On Thu, 2007-11-15 at 19:37 +0100, Wesley W. Terpstra wrote:
On Nov 15, 2007, at 10:55 AM, Morgan Read wrote:
Can anyone help me with the following error - is it serious; is the
file
transferred; are the other files transferred?
The file is transferred as are the other files.
However,
At 11:57 15.11.2007 +0100, you wrote:
Hi All,
I have a problem when transferring files from a rsyncd. This is my setup:
What is the error you get?
bye Fabi
--
To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync
Before posting, read:
whoops forgot to mention the error i receive ;)
This message appears on the client side:
rsync: writefd_unbuffered failed to write 4092 bytes [generator]:
Connection reset by peer (104)
rsync error: error in rsync protocol data stream (code 12) at io.c(1122)
[generator=2.6.9]
rsync error:
On Nov 15, 2007, at 10:55 AM, Morgan Read wrote:
Can anyone help me with the following error - is it serious; is the
file
transferred; are the other files transferred?
The file is transferred as are the other files.
However, rsync probably gives a non-zero exit status.
On Thu, 2007-11-15 at 19:37 +0100, Wesley W. Terpstra wrote:
On Nov 15, 2007, at 10:55 AM, Morgan Read wrote:
Can anyone help me with the following error - is it serious; is the
file
transferred; are the other files transferred?
The file is transferred as are the other files.
However,
On Thu, 2007-11-15 at 11:31 +0100, Daniel Maher wrote:
On Thu, 2007-11-15 at 22:55 +1300, Morgan Read wrote:
[EMAIL PROTECTED] ~]$ rsync -a -X -A -z -v /home/morgan/Documents
192.168.1.30:/home/morgan/Documents
[EMAIL PROTECTED]'s password:
building file list ... done
rsync:
On Thu, 2007-10-25 at 18:55 -0600, Rob Bosch wrote:
I received the following error on the client when testing the pre2
release.
4 [main] rsync 8728 _cygtls::handle_exceptions: Exception:
STATUS_ACCESS_VIOLATION
This might be the same crash that Erik Jan Tromp reported here:
Sent: Thursday, October 25, 2007 7:03 PM
To: Rob Bosch
Cc: rsync@lists.samba.org
Subject: Re: rsync error: STATUS_ACCESS_VIOLATION
On Thu, 2007-10-25 at 18:55 -0600, Rob Bosch wrote:
I received the following error on the client when testing the pre2
release.
4 [main] rsync 8728 _cygtls
Please CC the list so people other than me can help you and so your
messages will be available to future users.
On 10/15/07, Mario Domgörgen [EMAIL PROTECTED] wrote:
No, i don't run the client side command myself. The backup should start
from the server, so i use the the second command to
On 10/8/07, Mario Domgörgen [EMAIL PROTECTED] wrote:
i'm trying to backup one of my hosts with a two rsync-scripts, which are
mainly just calling on the client side
/usr/bin/rsync --server --sender -vlogDtprz --delete-excluded
--numeric-ids --exclude-from=/etc/sm-backup/rsync.exclude /
and
Zemlicka
Cc: rsync@lists.samba.org
Subject: Re: rsync error
On 10/7/07, Stephen Zemlicka [EMAIL PROTECTED] wrote:
I'm getting the attached error suddenly. I am using deltacopy for the
ease
of setup and e-mail notifications. It is from a local disk to a USB
drive.
I believe it's using rsync 2.6.6
On 10/7/07, Stephen Zemlicka [EMAIL PROTECTED] wrote:
Additionally, this backup contains about 100GB of photos. It seems to
backup each file every backup. Any ideas?
Try --modify-window=1 .
Matt
--
To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync
Before
PROTECTED] On Behalf Of Matt
McCutchen
Sent: Sunday, October 07, 2007 8:25 PM
To: Stephen Zemlicka
Cc: rsync@lists.samba.org
Subject: Re: rsync error
On 10/7/07, Stephen Zemlicka [EMAIL PROTECTED] wrote:
Additionally, this backup contains about 100GB of photos. It seems to
backup each file every backup
On 10/7/07, Stephen Zemlicka [EMAIL PROTECTED] wrote:
Still seems to transfer all files. Funny thing is it seems to only do it
for the pictures folder.
Please run rsync with -i and look at the output to see why it is
transferring the files.
Matt
--
To unsubscribe or change options:
wayned at samba.org wrote:
On Wed, Jul 04, 2007 at 03:36:35PM +0200, Peppe La Rosa wrote:
and it doesn't backup all Document and Settings directory !!!
That's not what it said. The name of the directory is apparently this:
Documents and Settings\Amministratore\Desktop
So, it
On Wed, Jul 04, 2007 at 03:36:35PM +0200, Peppe La Rosa wrote:
and it doesn't backup all Document and Settings directory !!!
That's not what it said. The name of the directory is apparently this:
Documents and Settings\Amministratore\Desktop
So, it looks like you've got at least one strangely
On 7/4/07, Wayne Davison [EMAIL PROTECTED] wrote:
On Wed, Jul 04, 2007 at 03:36:35PM +0200, Peppe La Rosa wrote:
and it doesn't backup all Document and Settings directory !!!
That's not what it said. The name of the directory is apparently this:
Documents and Settings\Amministratore\Desktop
-Original Message-
From: Wayne Davison - [EMAIL PROTECTED]
Sent: Friday, December 01, 2006 7:05 PM
To: [EMAIL PROTECTED]
Subject: Re: rsync error: error starting client-server protocol
On Tue, Nov 28, 2006 at 03:00:03PM +0100,
[EMAIL PROTECTED] wrote:
2006/11/28 14:52:36 [26584
On Tue, Nov 28, 2006 at 03:00:03PM +0100, [EMAIL PROTECTED] wrote:
2006/11/28 14:52:36 [26584] rsync denied on module home from localhost
(127.0.0.1)
This means that the host was not authorized (2.6.6 would have displayed
an auth error if the authentication had failed). I'd suggest editing
-Original Message-
From: Wayne Davison - [EMAIL PROTECTED]
Sent: Monday, November 20, 2006 5:44 PM
To: [EMAIL PROTECTED]
Cc: rsync@lists.samba.org
Subject: Re: rsync error: error starting client-server protocol
On Fri, Nov 17, 2006 at 11:49:27AM +0100,
[EMAIL PROTECTED] wrote
-Original Message-
From: Wayne Davison
Sent: Thursday, November 09, 2006 2:41 AM
To: rsync@lists.samba.org
Subject: Re: rsync error: error starting client-server protocol
On Wed, Nov 08, 2006 at 04:12:15PM +0100,
rsync.20.maillinglist @ spamgourmet.com wrote:
@ERROR: access
-Original Message-
From: Wayne Davison
Subject: Re: rsync error: error starting client-server protocol
On Mon, Oct 30, 2006 at 12:02:02PM +0100, you wrote:
I get now the error you can read in the subject. Any hint to get it
run again would be fine.
Please be more explicit
On Wed, Nov 08, 2006 at 04:12:15PM +0100, [EMAIL PROTECTED] wrote:
@ERROR: access denied to home from localhost (127.0.0.1)
This is the important bit. This means that you got through to the rsync
daemon and it rejected your access. The log file for the daemon will
have more explicit
Hi Wayne,I am getting the unexpected tag 3 error quite often when pushing using 2.6.8CVS on cygwin /WinXP to 2.6.8CVS on Linux over SSH (no daemon).The CVS version is pre tag-3.patch that you had posted.
I can compile with this patch on both sides (using cygwin on the client).However from the
On Fri, Jul 21, 2006 at 12:22:24PM +0200, Julian Pace Ross wrote:
However from the previous mails it is not clear what is causing this and
whether the patch is required on the server, client or both.
It is the receiving side that causes the tag-3 error (the generator,
to be specific). So, if
On Tue, May 02, 2006 at 10:30:39PM -0700, Wayne Davison wrote:
The attached patch should fix the problem. I've also checked the fix
into CVS (and it will appear in the next nightly tar file that gets
generated).
The patch I posted earlier works fine to fix this problem, but I ended
up with a
On Wed, May 03, 2006 at 11:58:07AM +1000, Anthony Sadler wrote:
Notice /etc/localtime not being able to open?
That happens because you're using use chroot = yes. When rsync is
running inside a chroot jail, it cannot access files that exist outside
the rsync module's path.
Rsync attempts to
backups not working :P
Anthony Sadler
Far Edge Technology
w: (02) 8425 1400
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayne Davison
Sent: Wednesday, 3 May 2006 16:15
To: Anthony Sadler
Cc: rsync@lists.samba.org
Subject: Re: Rsync error on client end
On Wed, May 03, 2006 at 11:58:07AM +1000, Anthony Sadler wrote:
unexpected tag 3 [sender]
My analysis shows that some deferred messages (which are those that
arrive in the generator when the generator is already trying to flush a
partial message down the socket) are not being handled by rwrite()
Hi,
Most of the rsync users love to have web interface or GUI list to rsync resources list.It is very useful and nice to have this.
http://www.debianhelp.co.uk/rsyncweb.htm
Hope who is responsible for this they will add this one
Thanks
On 05/01/06, John Van Essen [EMAIL PROTECTED] wrote:
On
On Jan 12, 2006, at 6:28 PM, Sean Peisert wrote:
Any advice on how to resolve this?
File a bug report with Apple.
They have modified the version of rsync that ships with OS X 10.4.x,
so they are the people who can ( should? ) fix it. FYI - There have
been problems with their version of
On Thu, 5 Jan 2006, gg gg234 [EMAIL PROTECTED] wrote:
protocol version mismatch -- is your shell clean?
(see the rsync man page for an explanation)
So... Did you look at the man page? Searching for clean brings
you to the DIAGNOSTICS section, which explains what the problem is
and how to
On Thu, 5 Jan 2006, gg gg234 [EMAIL PROTECTED] wrote:
Hi John,
Thanks for your reply
I have check that and i try to run ssh 172.29.5.130 /bin/true out.dat
and i got the out.dat file with only text inside is Rejected
If rsync is seeing that Rejected that explains the error.
This is a
thanks for your reply.I have tried that also but still getting the same error
On 09/12/05, Paul Slootman [EMAIL PROTECTED] wrote:
On Fri 09 Dec 2005, gg gg234 wrote: ssh: connect to host x.x.x.x port 22: No route to host
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
On Tue, Nov 08, 2005 at 09:33:36AM -0500, James W. Beauchamp wrote:
2005-11-08 04:14:42: inflate returned -3 (0 bytes)2005-11-08 04:14:42:
rsync error: error in rsync protocol data stream (code 12) at token.c(416)
Sounds like you're using an older version of rsync -- I fixed a
compression bug
Wayne;
Thanks - yep its an old version:
rsync-2.5.7-2.legacy.9
on RedHat 9. I guess I'm going to have to try to find an updated
package or compile from source unless you have another idea.
Thanks!
James
Wayne Davison wrote:
On Tue, Nov 08, 2005 at 09:33:36AM -0500, James W. Beauchamp
On Wed 06 Jul 2005, [EMAIL PROTECTED] wrote:
Thanks for the reply, this version of rsync is going to be used by a group
of people, I need to convince them that this is not a real error, do you
have any document which talks about this rsync behavior ?
Let's put it another way: where in the
On Tue, Jul 05, 2005 at 04:33:36PM -0400, [EMAIL PROTECTED] wrote:
rsync error: syntax or usage error (code 1) at main.c(1097)
Running rsync without any options *is* a syntax error. If all you want
to see is the help, use the --help option.
..wayne..
--
To unsubscribe or change options:
Thanks Wayne.. Your mail answered my query perfectly..
-sanal
On Thu, Jun 16, 2005 at 08:49:54PM +0530, [EMAIL PROTECTED]
wrote:
Is there any way to ignore these errors when i do file transfer using
rsync?
What do you mean by ignore? They're just warnings, so rsync ignores
them already for
On Thu, Jun 16, 2005 at 08:49:54PM +0530, [EMAIL PROTECTED] wrote:
Is there any way to ignore these errors when i do file transfer using
rsync?
What do you mean by ignore? They're just warnings, so rsync ignores
them already for most things, just not deletions that happen after the
warnings
On Tue, Mar 15, 2005 at 06:54:16AM +0100, Dag Wieers wrote:
Another update. Only some of the hardlinks seem to be actually missing.
Does this make any sense ?
Yes, that gives me something to go on for testing. I should hopefully
be able to reproduce what is going on.
..wayne..
--
To
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
OK, this was a combination of --delay-updates and --hard-links that was
causing a problem at the end of the run. I've checked in a fix to CVS,
and the latest nightly tar file has this fix
On Tue, 15 Mar 2005, Wayne Davison wrote:
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
OK, this was a combination of --delay-updates and --hard-links that was
causing a problem at the end of the run. I've checked in a fix to CVS,
:[EMAIL PROTECTED] Behalf Of
Wayne Davison
Sent: Tuesday, March 15, 2005 11:37 AM
To: Dag Wieers
Cc: rsync@lists.samba.org
Subject: Re: rsync error: protocol incompatibility (code 2) at
main.c(451)
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender
On Tue, Mar 15, 2005 at 12:39:54PM -0600, [EMAIL PROTECTED] wrote:
Dunno if this has any relationship (or even if this is the right place to
break in)
Seems like a decent place to jump in to me... Welcome!
SERVER: rsync-HEAD-20050314-2227GMT
rsync error: protocol incompatibility (code 2) at
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
It would help to know what options you had enabled.
..wayne..
--
To unsubscribe or change options: https://lists.samba.org/mailman/listinfo/rsync
Before posting, read:
On Mon, 14 Mar 2005, Wayne Davison wrote:
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
It would help to know what options you had enabled.
Damn, I was planning to include those. Here they are:
-avHl --progress --delete-after
On Mon, 14 Mar 2005, Wayne Davison wrote:
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
It would help to know what options you had enabled.
An update. I noticed that the files being transfered or not updated at the
end of the run
On Tue, 15 Mar 2005, Dag Wieers wrote:
On Mon, 14 Mar 2005, Wayne Davison wrote:
On Tue, Mar 15, 2005 at 04:15:46AM +0100, Dag Wieers wrote:
Invalid packet at end of run [sender]
It would help to know what options you had enabled.
An update. I noticed that the files being
On Tue, Feb 01, 2005 at 10:28:47AM -0800, Jeff Yana wrote:
rsync error: syntax or usage error (code 1) at
/home/lapo/packaging/tmp/rsync-2.6.3/main.c(1073)
You'll have to tell us the command you're trying to run or we won't be
able to figure out what you're doing wrong.
..wayne..
--
To
Wayne Davison wrote:
On Tue, Feb 01, 2005 at 10:28:47AM -0800, Jeff Yana wrote:
rsync error: syntax or usage error (code 1) at
/home/lapo/packaging/tmp/rsync-2.6.3/main.c(1073)
You'll have to tell us the command you're trying to run or we won't be
able to figure out what you're doing
On Tue, Feb 01, 2005 at 01:47:19PM -0800, Jeff Yana wrote:
In this case, I was just inputting rsync with no flags or args.
In that case, in addition to the above error, rsync should have also
output a big, long usage message (on stderr). You can get the usage
message on stdout via rsync --help.
Wayne Davison wrote:
On Tue, Feb 01, 2005 at 01:47:19PM -0800, Jeff Yana wrote:
In this case, I was just inputting rsync with no flags or args.
You are right, I just did not include it as I thought it would be
implicit to all. Sorry about the confusion.
In that case, in addition to
On Wed, Jan 26, 2005 at 06:47:31PM -0500, Tristan Fiedler wrote:
I have an error code 23 (shown below) which I can't debug:
Mixed into the verbose output should be one or more warnings about
either a file-access or a file-writing problem that prevented a file
from being updated. Typically the
Standard newbie issue.
rsh host command (or ssh host command in your case) does so in a fairly
stripped environment, for instance, a small $PATH, which is your issue
(unless rsync isn't even installed on smmk39). rsync has aneasy
workaround for it. add
Jim: first - glad to see you're able to reach the group again.
Second: In later messages, he'd found and fixed true rsh - to where rsh
remotehost which rsync returned /usr/local/bin/rsync, and still got the
timeout on actual rsyncs.
I sent an enormous number of possible outputs he could get
Hello Tim,
Sorry for the late response. I was out of town for weekend.
Ok, first I tried
rsync -e rsh --rsync-path=/usr/local/bin/rsync hostwithrsync:/etc/services
I got the following the output:
-rw-r--r-- 73490 2003/10/27 09.26.50 services
Services
desk:3032734776
[EMAIL PROTECTED]
Naveen Babu [EMAIL PROTECTED]
04/26/2004 09:05 AM
To
Tim Conway/Denver/Contr/[EMAIL PROTECTED]
cc
[EMAIL PROTECTED]
Subject
Re: Rsync Error..
Hello Tim,
Sorry for the late response. I was out of town for weekend.
Ok, first I tried
rsync -e rsh
the directory that the binary is in.
Tim Conway
Unix System Administration
Contractor - IBM Global Services
desk:3032734776
[EMAIL PROTECTED]
Naveen Babu
04/26/2004 11:41 AM
To
Tim Conway/Denver/Contr/[EMAIL PROTECTED]
cc
[EMAIL PROTECTED]
Subject
Re: Rsync Error..
Tim Conway wrote
rsh 66.123.34.123 which rsync
I expect you'll get something like no rsync in /usr/bin /usr/ccs/bin
/usr/bin/X11 /usr/contrib/bin /usr/local/bin . Some systems don't report
the remote shell connection open until the called remote program comes up,
so one missing from the path can look like a
Hello,
when i gave rsh 66.123.34.123 which rsync at the source system i got the following
error
66.123.34.123: Connection refused
rsh 66.123.34.123 works perfectly fine.
What could be the problem..?
Thanks,
Naveen.
Tim Conway [EMAIL PROTECTED] wrote:
rsh 66.123.34.123 which rsync
I expect
Ah! Now I've got you.
rsh without parameters does an rlogin, which uses the service commonly
called login, on port 513.
With parameters, it does a plain rsh, using the service commonly called
shell, on port 514.
Here's a system with both holes open (deep inside a well-protected
intranet, host
However when I first give rsh 66.123.34.123 and after remote login when i give
which rsync ; i get the following output
/usr/local/bin/rsync.
Jim Salter [EMAIL PROTECTED] wrote:
Clearly, if you can't execute the which command remotely, rsh is _not_
working perfectly fine. If you can't use
Hello,
I uncommented shell in inetd.conf on the destination system.
The command rsh 66.123.34.123 which rsync is working fine now .
I get the output /usr/local/bin/rsync.
But the command:
rsync -avvznrbe rsh /sourcepath 66.123.34.123:/destinationpath
Still does not work. I get the
Ok, I'd expected it to go once you could rsh host which rsync.
Since you're not getting a
+
[EMAIL PROTECTED]
/usr/local/admin/binrsync -e rsh --rsync-path=/usr/local/bin/rsync
hostwithoutrsync:/etc/services
sh: /usr/local/bin/rsync:
Tim already answered your question for you. Your remote system is not
answering on port 514, only on port 513. See your OS's rsh man page for
further details - this isn't really an rsync question, it's an rsh question.
However when I first give rsh 66.123.34.123 and after remote login when i
Follow up to my own posting.
I was running rsync with -v and rsync was having problems chowning (not
transferring) files. I realise now that the error message applied to this
problem. I found the error message a little confusing, as I was trying to
track down the non-transferred files, while
On Tue, Jan 27, 2004 at 04:31:53PM -0800, AI Connex wrote:
I use rsync to mirror several servers.
I run RH7.3
My rsyncd.conf file is:
motd file = /etc/rsync.d/rsync.motd
log file = /var/log/rsyncd.log
pid file = /var/run/rsyncd.pid
lock file = /var/run/rsync.lock
hosts allow =
I've encountered a similar situation, and tracked it down. It seems that
if the shell for your user is set to bash2 versions 2.0 - 2.05.0, it
causes your IP to appear as 0.0.0.0 . However, this has been fixed in
2.05b.0, and also works as normal in every other shell I've tested (zsh,
csh, bash
On Tue, Jan 27, 2004 at 09:55:41PM -0500, [EMAIL PROTECTED] wrote:
I've encountered a similar situation, and tracked it down. It seems that
if the shell for your user is set to bash2 versions 2.0 - 2.05.0, it
causes your IP to appear as 0.0.0.0 . However, this has been fixed in
2.05b.0, and
On Tue, Dec 23, 2003 at 04:59:20AM +0100, [EMAIL PROTECTED] wrote:
rsync -avv --delete --delete-excluded server::public/$i dest/
Look in the server's log file -- rsync puts some of the messages there
out of paranoia about exposing too much about the server's setup to the
end user. It may well
Look in the server's log file -- rsync puts
some of the messages there out of paranoia
about exposing too much about the server's
setup to the end user. It may well be that
rsync is being too paranoid in this instance.
..wayne..
Is there any way to *change* that behavior, particularly if
1 - 100 of 142 matches
Mail list logo
