Hallo, steve,
Du meintest am 05.09.13:
School classes often have projects with files that many students
will need to edit.
[...]
Also, nobody forces applications to keep files open while
they are edited. For example even some Windows native editor
(I don't remember which) loads files into
Hallo, Daniel,
Du meintest am 22.08.13:
I did fix this:
In [global]
Set:
follow symlinks = yes
wide links = yes
unix extensions = no
As with Samba 3
I wouldn't set follow symlinks = yes as a global option ...
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to
Hallo, Jonathan,
Du meintest am 23.07.13:
Why use a word like orthogonal?
Orthogonal is a single word, is precise and describes what is
required exactly.
Sorry - that depends.
I know this word as a synonym of rectangular, and I mostly know it in
a geometrical environment.
90 degrees =
Hallo, Volker,
Du meintest am 22.07.13:
So is there ANY way to provide access to a share, with only a
password, not caring about a username? Or must I pick a name (e.g.,
root) and tell all clients to log in under that username? If I do
the latter, and root isn't listed in smbpasswd, will it
Hallo, bhogue,
Du meintest am 17.07.13:
I was told that samba will re-read the smb.conf if you make changes
without restarting the smb service.
That's not true for the [global] section.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following URL and read the
instructions:
Hallo,
I wrote am 16.06.13:
[...]
The solution required the correct storage of the DOS attributes, the
appropriate configuration lines are
# store DOS attributes in extended attributes
ea support = yes
store dos attributes = yes
map readonly = no
map archive = no
Hallo, Jonathan,
Du meintest am 12.06.13:
Here is the information that you requested. When I say that all
permissions on a file are lost, this is at the windows level. In
Windows Explorer, we go to open the file in the default program, we
get an Access denied. Contact your administrator.
Hallo, Tanveer,
Du meintest am 11.06.13:
Here is the information that you requested. When I say that all
permissions on a file are lost, this is at the windows level. In
Windows Explorer, we go to open the file in the default program, we
get an Access denied. Contact your administrator.
Hallo,
I'm just playing with samba-4.0.5 (slackware), running as samba3 (and
replacing/updating samba-3.6.x).
Seems to work fine - many thanks!
Perhaps one problem: when I start the server or when I run smbclient -N
-L hostname (and perhaps with some other start commands) then samba
Hallo, Phil,
Du meintest am 09.04.13:
[...]
So I did a bit of looking around and one very interesting thing I
noticed is that /usr/local/samba/lib no longer has the libgnutls
files (prefix is /usr/local/samba).
Just for the record: my system (slackware current) has installed
Hallo, Usuário,
Du meintest am 20.01.13:
Substituting charset 'UTF-8' for LOCALE
password:
lang_tdb_init: /usr/lib/samba/en_US.UTF-8.msg: No such file or
directory NT_STATUS_ACCESS_DENIED: Access denied (0xc022)
Why it's returning Access Denied for me ?
As I've told you in the squid
Hallo, Nirmit,
Du meintest am 26.12.12:
Please tell how to do this as I am not able to make my window as
server,
Which Linux distribution have you installed on your client?
Do I need to require to install samba on my windows machine,
No - it is installed. In German it is called
Hallo, Jeff,
Du meintest am 31.10.12:
I have logon drive = in smb.conf but testparm does not report that.
Just try
testparm -sv
Then you can see the actual options (regardless wether they are set in
smb.conf or not).
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to
Hallo, Phibee,
Du meintest am 24.09.12:
In my config, i have:
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
TCP_NODELAY is the pre-installed option, and the *BUF options are
really bad, since many years.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the
Hallo, Phibee,
Du meintest am 24.09.12:
In my config, i have:
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
TCP_NODELAY is the pre-installed option, and the *BUF options are
really bad, since many years.
Ok i can delete it, but it's the reason of Out of memory ?
Even if
Hallo, steve,
Du meintest am 20.08.12:
This is a bit off thread, but could you specify any budget
hardware/minimum Samba4 DC Samba3 fileserver server requirements for
a college of 2000 students sharing 150 duel boot KDE/w7?
Where's the problem?
Such configurations need a machine with 2 GHz
Hallo, steve,
Du meintest am 20.08.12:
This is a bit off thread, but could you specify any budget
hardware/minimum Samba4 DC Samba3 fileserver server requirements
for a college of 2000 students sharing 150 duel boot KDE/w7?
Where's the problem?
Such configurations need a machine with 2 GHz
Hallo, Andrew,
Du meintest am 11.08.12:
In Samba3, I have full rfc2307 compliance via winbind where all
attributes can be obtained from AD.
In Samba4 I only have partial rfc2307 compatibility with:
idmap_ldb:use rfc2307 = yes
uidNumber and gidNumber can be obtained from AD but
Hallo, Jonathan,
Du meintest am 01.08.12:
Seems I can't find the root cause of $subj.
When I store a file on my home, it gets chmodded ugo+x ...
[...]
mount your file system with extended attributes
enabled and then add the following to your smb.conf
# store DOS attributes in extended
Hallo,
I've just tried kernel 3.4.6, self compiled, with the .config from
kernel 3.3.7.
Samba version 3.5.14 (slackware)
When I run a script with (among many other lines) the command
mount.cifs //$share/$src /path/to/$target \
-o noperm,sec=ntlmv2,$Loginparms
(which runs without any
Hallo, Günter,
Du meintest am 28.07.12:
When I run a script with (among many other lines) the command
mount.cifs //$share/$src /path/to/$target \
-o noperm,sec=ntlmv2,$Loginparms
(which runs without any problem under kernel 3.3.7) then I get an
error message (some cifs problem), and
Hallo, Scott_Purcell,
Du meintest am 16.05.12:
mount.cifs fails (with mount error(13): Permission denied):
sudo mount.cifs //server/share /mnt/ -o
credentials=/etc/.smb_creds.txt
Just try
sudo mount.cifs -o ... //server/share ...
mount.cifs needs the options early.
Viele
Hallo, Stefano,
Du meintest am 04.05.12:
What tells
df
i wrote this script:
#!/bin/bash
Login=rw,file_mode=0644,dir_mode=0755,username=zingalo,password=
,noserverino smbmount //192.168.5.219/users/zingalo /mnt/samba/Dati
zingalo is user registered on ldap server. in his
Hallo, Stefano,
Du meintest am 04.05.12:
#!/bin/bash
Login=rw,file_mode=0644,dir_mode=0755,username=zingalo,password=**
** ,noserverino
smbmount //192.168.5.219/users/zingalo /mnt/samba/Dati
df is
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5
Hallo, zingalo/Stefano,
Du meintest am 03.05.12:
Hi,
yes, home directories are specified in the homeDirectory attribute
as:
//amahoro/users/zingalo
That's the samba notation. //$SERVER/$SHARE
but after logging this creates the same directory on the client and
this is wrong.
What tells
Hallo, zingalo,
Du meintest am 03.05.12:
yes, home directories are specified in the homeDirectory attribute
as:
//amahoro/users/zingalo
That's the samba notation. //$SERVER/$SHARE
You mean my notation is wrong?
No - that's one kind of notation.
When this share is mounted then you see
Hallo, Daniel,
Du meintest am 03.05.12:
Try ex.:
[global]
logon script = logon.bat #--your logon.script,if not defined in
ldap
logon path = /users#--your path to homes.Leave empty if
defined in ldap
[netlogon]
Path=/path/to/your/netlogon
Just for curiousity: that looks like a mix
Hallo, zingalo/Stefano,
Du meintest am 02.05.12:
I have a computer room with 30 machine Ubuntu and about 200
differents users.
So user_1 will logon on client_1 and he will work on
/usersHomes/user_1 directory.
Then, the user_2 will logon on the same client and he will work on
Hallo, stefano,
Du meintest am 26.04.12:
The LAN has a computer room with 30 pc Ubuntu.
In addition to these there are others computers will can connect to
the LAN using wireless connection and they can have differents
operating systems (Mac, Windows, Ubuntu).
I want that every user can
Hallo, stefano,
Du meintest am 26.04.12:
I'll do some questions:
I need that after the power-on of the client, will appear the login
screen. Is this like your solution also?
No - that's at least impossible for private machines.
Our school machines can show such a screen via autostart (or
Hallo,
in a neighbourhood school Samba (versions 3.5.7 and 3.5.10) show (for
only one machine) the following log:
...
[2012/02/02 11:08:34.974139, 0] lib/fault.c:326(dump_core)
dumping core in /var/log/samba/cores/smbd
[2012/02/02 11:37:33.245678, 0]
Hallo, John,
Du meintest am 20.01.12:
root@hayek:~# smbpasswd john
New SMB password:
Retype new SMB password:
Failed to find entry for user john.
This is despite the existence of the user
root@hayek:~# cat /etc/samba/smbpasswd
#
# SMB password file.
#
Hallo, luxInteg,
Du meintest am 30.12.11:
I have setup a computer to act as a 'samba-server'. The machine has
these:- --cpu: amd64
--OS: cblfs linux
--samba-3.6.0 compiled from sources in /usr/local/samba
The clients are windows 7 clients. They can only see the server as
its IP-
Hallo, Rajesh,
Du meintest am 26.12.11:
In which file the user entry and password is stored when i added a
user using
smbpasswd -a username
in redhat enterprise linux 6 (64bit)
That depends - what tells
testparm -sv 21 | grep 'passdb backend'
If you only will see the result of
Hallo, nikos,
Du meintest am 17.12.11:
i am really wondering a logon script stated in the config file with
for example logon script = %L.bat
can't contain inside variable substitutions from samba for example
a script that it will have inside and it will be uploaded in the
client to
Hallo, Phillip,
Du meintest am 09.11.11:
I have a backup script that uses smbclient to push files to a Windows
server and I have noticed that the mtime on the server is the time of
upload, not the mtime of the original file. I can not find an option
to preserve the original mtime. Does
Hallo, Ian,
Du meintest am 26.10.11:
I just came across an interesting question. Is there a way to do
realtime virus scanning on samba 3.4.7 on ubuntu 10.04.
Maybe there is some way. But it may produce only virtual security.
In the last months I've tested many malware mail attachments, p.e.
Hallo, Christian,
Du meintest am 11.08.11:
I am running a version of ubuntu lucid 64 bit, and so will be
upgrading with the apt-get program.
Well, I have no idea what are plans for Ubuntu (you don't tell what
version you're usingsounds like 8.04) but I don't think there
will be
Hallo,
for a school server I'd like the option
write list = /path/to/class-8a-list
for the share [class-8a]
Ok - I can work with
[class-8a]
...
include /path/to/writelistdefinition.txt
...
but that's more ugly.
Viele Gruesse!
Helmut
--
To unsubscribe from
Hallo, Chris,
Du meintest am 15.07.11:
for a school server I'd like the option
write list = /path/to/class-8a-list
for the share [class-8a]
why not use a user group?
The simple class list still exists, for mail aliases. It's very simple
to change if necessary.
Why should I
Hallo, Jeremy,
Du meintest am 15.07.11:
for a school server I'd like the option
write list = /path/to/class-8a-list
for the share [class-8a]
Ok - I can work with
[class-8a]
...
include /path/to/writelistdefinition.txt
...
but that's more ugly.
Hallo, Jeremy,
Du meintest am 15.07.11:
for a school server I'd like the option
write list = /path/to/class-8a-list
for the share [class-8a]
Ok - I can work with
[class-8a]
...
include /path/to/writelistdefinition.txt
...
but that's more ugly.
Hallo, Charles,
Du meintest am 09.06.11:
This should be official list policy for ALL email lists...
just like do not top post *g ?
Don't be stupid Robert... there are times when top-posting is
perfectly acceptable, and that was one of them (ie, when the content
of the quote is
Hallo, Marc,
Du meintest am 19.05.11:
You can find two Logfiles in the attached archive. One's named
Success.log and the other one Failing.log.
No - this mailing list doesn't support such attachments. Try inline
copies.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the
Hallo, Chris,
Du meintest am 08.05.11:
information for NetBIOS and WINS.
And fix the name resolve order in
smb.conf (you have a typo - hosts instead of host).
In smb.conf:
name resolve order = wins host bcast
Hallo, Jeronimo,
Du meintest am 26.04.11:
/usr/bin/smbclient windows-server\backup db$ -U jelo 123456 -c
lcd /root;put mysql-dump.sql
But when I try to run the same command from /etc/crontab, it fails:
00 10 * * * root/usr/bin/smbclient
windows-server\\backup db$ -U jelo
Hallo, L.P.H.,
Du meintest am 02.04.11:
Ok problem 2 is solved, made a typo in disabling the unix extentions.
this works.
(in global)
unix extentions = no
Sure?
My samba (3.5.7) uses unix extensions, with 1 t.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following
Hallo,
I'm trying to convert smbpasswd to passdb.tdb.
cd /etc/samba/private
# (where smbpasswd lies)
pdbedit -i smbpasswd -e tdbsam:/etc/samba/private/passdb.tdb
converts all human users, but it converts (or transfers) no machine
account.
In smbpasswd are many entries beginning with
Hallo, Katariya,
Du meintest am 24.03.11:
I am unable to change owner to Administrator of the file through
smbcacls command.
CIFS share is in french domain.
SMBACLS for the file are:
==
smbcacls -n //10.10.18.19/Rahulk\
Hallo, Katariya,
Du meintest am 24.03.11:
I have French CIFS server.
[...]
mount -t cifs //MACHINE/DatasetFIGS_ùÉ??ÄÑ£??¬nbsp; /tmp/rahul
-o user=ùù,password=ùù,domain=eKKDr mount error 13 = Permission
denied Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
nbsp;
Does
Hallo, Eckert,,
Du meintest am 17.03.11:
Can I go directly from 3.4.7 to the new 3.5.8 without installing
any intermediate versions? Or is there a different route I should
follow?
Should work. I've done this update/upgrade many times, without problems.
Viele Gruesse!
Helmut
--
To
Hallo,
I've just tried to compile Samba 4.0.0alpha14 under Slackware 13-current
- it failed.
206 warnings, 257 errors, and last famous words
cite on ---
[2152/2374] Linking default/source4/heimdal_build/libroken-samba4.so
[2153/2374] Linking
Hallo, Kalev,
Du meintest am 08.03.11:
ive tried to send letters to samba list few times and every time i
get a mail back with an error Message status - undeliverable from
mailer-dae...@mthelen7.ballarat.edu.au. The contents of the letter is
following:
The message that you sent was
Hallo, Paulo,
Du meintest am 17.02.11:
I would take a little doubt, installed the Samba 3.5. And where is
the file smbpasswb? I know, it is in /etc/samba/ , but it isn't
there!
Look for passdb.tdb instead.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following URL and
Hallo, J.,
Du meintest am 01.03.11:
testparm output:
[global]
workgroup = CASA
map to guest = Bad User
passdb backend = tdbsam
username map = /etc/samba/smbusers
cups options = raw
(I put security = user but is not displayed in testparm)
There's
Hallo, Chris,
Du meintest am 25.02.11:
1) The Linux local user guest must be added to samba with
smbpasswd -a guest ???
In the example I show their is no local 'nix user named guest. The
purpose of the username map file is to map the Windows guest
user/account to the 'nix nobody
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back up
what I would need to completely rebuild the server.
My PDC is running with security=user. I know I have to backup:
/home
/netlogon
/profiles
/etc/passwd (and shadow,
Hallo, Robert,
Du meintest am 16.02.11:
Burned once and all that. I am setting up rsync cron jobs to back
up what I would need to completely rebuild the server.
[...]
What else?
Command:
net getlocalsid localsid.txt
And on a rebuild, how do I use this sid instead of whatever
Hallo, Sabine,
Du meintest am 10.02.11:
The logoff from the network shares on the Windows 7 clients is
realised by a simple net use * /d /yes
But you can't assure that every user disconnects via this command.
[logon]
The little programm sends username
und password to the server and the
Hallo, Simon (and Andrew),
Du meintest am 08.02.11:
in the samba mailinglist there was a remark that samba 4 is designed
only for the BIND nameserver; look escpecially at
http://lists.samba.org/archive/samba/2011-February/160848.html
I know that most programmers work in their free time
Hallo, samba,
the mailinglist archive shows some articles from the future:
http://lists.samba.org/archive/samba/
I'm impressed!
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
Hallo, fdelval,
Du meintest am 03.02.11:
I dont want to use root to join clients to the domain; i prefer
creating a plain user.
Look at admin users in [global, file /etc/samba/smb.conf.
There you can define which linux user is allowed to do this job.
Viele Gruesse!
Helmut
--
To unsubscribe
Hallo, fdelval,
Du meintest am 03.02.11 zum Thema Re: [Samba] understanding users mapping:
now i have like 3 ways of achieving what i want.
1) username map = /etc/samba/smbusers (linking users to root)
2) admin users = frank
3) messing up with my netgroups and granting rights
Which one
Hallo, Robert,
Du meintest am 03.02.11:
I have two samba servers running Ubuntu 10.04 Samba Version 3.4.7
One server acts as domain controller and stores user ids in a .tdb
Somehow I've ended up with a duplicate user name.
On the Domain Controller
# pdbedit -w -L|grep debbie
Hallo, Andrew,
Du meintest am 04.02.11:
Just for curiousity: I prefer dnsmasq as nameserver; do you support
this program too?
No. BIND is the only server that will support the range of functions
Samba requires.
That doesn't please me - sorry.
I know BIND has a bad name in some minds,
Hallo, Andrew,
Du meintest am 03.02.11:
Is it possible to use a seperate BIND server instead? I'd like to
not run BIND on my file server.
This isn't recommended. In future versions of Samba4, we will
support BIND 9.8 and a plugin that will directly read and write our
database, to support
Hallo, Mat,
Du meintest am 17.01.11:
Samba 3.5.6 uses tdbsam, earlier versions have used smbpasswd;
you should look which file (smbpasswd or passdb.tdb) your old
version has used.
For converting you can use pdbedit.
Danke, I will check this I am sure that is the problem as
Hallo, Mat,
Du meintest am 16.01.11:
I upgraded from Debian Lenny (Samba 3.2.5) to Squeeze (Samba 3.5.6)
and now my PDC does not work.
In the past when upgrading from one release to another all of the
machine trust accounts no longer worked but I was able to just rejoin
then to the domain.
Hallo, Konstantin,
Du meintest am 13.01.11:
I have also added a call to cracklib to check password strength prior
to applying it. It all works well, but the task it to force users to
use unique password every time they have to change it. A typical
scenario I must prevent is this: user change
Hallo, Henri,
Du meintest am 13.01.11:
What is the best way to proceed to make this migration as seamless
as
possible for all users (more than 200 user accounts with more than
200 PC in the domain) ?
My usual way:
- copy/overwrite /etc/samba to the new machine
- copy/overwrite all
Hallo, henri,
Du meintest am 12.01.11:
Is it possible to migrate Samba to a new server without breaking
Domain membership of all the clients ?
I didn?t get any info on that issue, is there someone that has
previous experience of doing that ? Or maybe a link to some relevant
info ?
I have
Hallo, Mike,
Du meintest am 12.01.11:
Thank you too, for your kind response.
Don't mention ...
By the way: that description assumes that the new server is the new
login server too and runs instead of the old server.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the
Hallo, TAKAHASHI,
Du meintest am 03.12.10:
I want to share( Map as drive) Linux folder to Windows.If posible
share to MS-DOS operating system
You can connect from MS-DOS to Samba with LAN Manager or
MS Network Client.
They are still available from Microsoft at
Hallo, Stefan,
Du meintest am 29.11.10:
A little off-topic (as I don't use LDAP with samba in my particular
case), but regarding Win7 and Samba-PDC:
Could someone here please tell me/us what the current recommended
best practise is for using Win7-clients with a Samba PDC?
Hallo, Volker,
Du meintest am 02.11.10:
Although the concepts of Primary and Backup
Domain Controller are a lot less relevant in a full Active
Directory Domain. All domain controllers are equal for most
purposes.
Animal farm?
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to
Hallo, Robert,
Du meintest am 21.10.10:
Do I need a separate INCLUDE in each section, or can I have one
INCLUDE at the end and just include needed sections?
include replaces the calling line with the lines of the invoked
file.
You can put many include lines into the smb.conf. At nearly(?)
Hallo, Derek,
Du meintest am 17.10.10:
I have compiled and installed Samba 3.6 from git to a separate
directory for testing. Now that everything is operating, I would
like to start Samba at the boot-up of the server. The installation
did not configure Samba to start automatically, and I
Hallo, Gilles,
Du meintest am 29.07.10:
So what's the correct way on Ubuntu 10.04 to (re)start Samba,
including smbd and nmbd?
If the daemons run and only need to re-read the smb.conf:
killall -HUP smbd
killall -HUP nmbd
on Linux machines.
I know - there are some Unix
Hallo, Mark,
Du meintest am 26.07.10:
I set up a Slackware 13 file server running Samba 3.2.13.
Perhaps you first change to Samba 3.5.2 from Slackware 13.1 or to Samba
3.5.3 from slackware-current.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following URL and read the
Hallo, Dadoo,
Du meintest am 08.07.10:
#testparm -v | grep acl
acl compatibility = auto
acl check permissions = Yes
acl group control = No
acl map full control = Yes
force unknown acl user = No
nt acl support = Yes
map acl
Hallo, Leandro,
Du meintest am 07.07.10:
The problem with simply moving the files over to the
Ubuntu server is that the files on the XP box are
stored on a RAID array that comes with a controller
card whose driver is really only designed to be run on
Windows, not Linux.
Sorry - where is
Hallo, Leonardo,
Du meintest am 03.07.10:
My scripts consist only im mapping network folders.
[...]
Hmm, it looks like that there are no users running the scripts
partially. What happens is some users that have manually mapped their
drives. None of the users are really running the scripts.
Hallo, Tom,
Du meintest am 30.06.10:
No I do not want any commercial support. I want structured
information at my fingertips :-)
You get what you pay for.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the following URL and read the
instructions:
Hallo, Tom,
Du meintest am 30.06.10 zum Thema RE: [Samba] Samba Forum vs. Mailing List?`!:
No I do not want any commercial support. I want structured
information at my fingertips :-)
You get what you pay for.
With all respect, but what you write to me sounds like irony against
the whole
Hallo, Tom,
Du meintest am 30.06.10:
I wanted to ask if there is an official Samba Forum
No need?
Why do you need a forum with a mailing list?
Because a forum IMHO has certain advantages over a mailing list.
But you should first try to use the possibilities of a mailing list
Hallo, Neil,
Du meintest am 15.06.10:
This has always bothered me.. wtf does gecos mean (in the samba
ldap)?
General Electric Computer Operating System.
They invented the GECOS field in the /etc/passwd file. Long time
ago.
Viele Gruesse!
Helmut
--
To unsubscribe from this list go to the
Hallo, Robert,
Du meintest am 21.05.10:
I am using Samba to read a file on a Windows share from Linux.
Linux version is Ubuntu 9.04 (I think). Not sure about the Samba
version (sorry, can't check it now); it's whatever was packaged with
Ubuntu. Windows version is Windows Server 2003 SP 2.
Hallo, Mike,
tur...@mike-leone.com meinte am 04.05.10 in Samba zum Thema Re: [Samba]
smbclient -k works; mount -t cifs does not:
$ sudo mount -t cifs //dual-booter/TestShare /mnt -o sec=krb5
mount error(2): No such file or directory
Try using the FQDN of the server in the UNC. For instance:
Hallo, Timothy,
Du meintest am 14.04.10:
I am hoping someone can point me in the right direction. I just
started adding windows 7 to my domain, and my logon scripts are not
running. They arent even trying to run. How do you enforce policies
on windows 7? --
Which samba version?
Windows 7
Hallo, live.fx,
Du meintest am 31.03.10:
I have some complaints from Win XP users.
Win XP clients regularly lost samba share - mapped as network drive.
I don`t see any errors in logs.
1. I have 4 linux machines, with mapped SAMBA 3.5 shares as CIFS. -
never lost.
2. Some Windows XP
Hallo, John,
Du meintest am 31.03.10:
How do they lose the connection?
I am working in a (very small) LAN with a Samba 3.4.x server, a
Windows- 2000 client and a Windows XP-Home client.
They just can not use P drive after some time.
1. User simple mount network share as permanent drive
Hallo, John,
Du meintest am 14.03.10:
I just did a search in Google and I also found the warnings about
the use of sockect options with Linux kernel 2.6. So, I suppose
that one finds what one is looking for...
I have seen enough recommendations not to mess with the socket
options on modern
Hallo, Daniel,
Du meintest am 06.03.10:
I have a server that uses both NFS and Samba. I noticed on a Windows
client that some directories and files were in the 8.3 format, and
clicking on them resulted in an Access denied. message.
I've since upgraded to 3.5.0 - now the Access denied.
Hallo, Lars,
Du meintest am 05.03.10:
The application works with a lot of database files (*.DBF) and
everything works fine if only one workstation has started the
application. Getting from the main menu to the data for the first
patient takes about 3 to 5 seconds which is fine. But every
Hallo,
compiling 3.4.5 worked.
Installing it was no problem.
But now I get the message
can't open username map /etc/samba/private/smbusermap Error Keine
Berechtigung
The rights were
700 for dir /etc/samba/private
644 for file smbusermap
When I change the dir private to
Hallo,
I try to compile samba 3.4.5 in my slackware installation (slackware-
current).
Kernel compiling and compiling other packets works as desired.
I use the samba.SlackBuild script from slackware.org (changing the
version number of samba only).
Hallo,
I wrote am 19.02.10:
Compiling 3.4.5 shows
Start --
[...]
Linking bin/smbd
lib/gencache.o: In function `gencache_iterate_fn':
gencache.c:(.text+0xb1): undefined reference to `ap_fnmatch'
collect2: ld returned 1 exit status
make: *** [bin/smbd] Error 1
--
Hallo, Gungne,
Du meintest am 17.02.10:
I need to access a share on one of the win2003 servers. How do I do
this? I want to mount the win share so that I permanently can access
it from the debain workstations.
Structure (not completely tested)
smbclient -N -L win2003
shows the
Hallo, Gungne,
Du meintest am 17.02.10:
I just want to access the shares on the windows server.
My server (where I want to mount shares)
My gateway (FW)
10.23.152.1
10.23.1.2
10.23.150.100 (win2003 with shares)
What tells
smbclient -N -L 10.23.150.100
Viele Gruesse!
Helmut
Hallo, Gungne,
Du meintest am 17.02.10:
I just want to access the shares on the windows server.
My server (where I want to mount shares)
My gateway (FW)
10.23.152.1
10.23.1.2
10.23.150.100 (win2003 with shares)
What tells
smbclient -N -L 10.23.150.100
myserver:~#
1 - 100 of 290 matches
Mail list logo
