Jeremy Allison wrote:
Am I correct in saying:
smbclient - smbd maxes the wire.
smbclient - WinXP maxes the wire.
Not in my case. I noticed that
smbclient pulling data from WinXP = ~4MB/s
2xsmbclient pulling data from WinXP = ~8MB/s
3xsmbclient pulling data from WinXP = ~11MB/s
--
Diego
On Fri, Feb 26, 2010 at 10:06:28AM +0100, Diego Zuccato wrote:
Am I correct in saying:
smbclient - smbd maxes the wire.
smbclient - WinXP maxes the wire.
Not in my case. I noticed that
smbclient pulling data from WinXP = ~4MB/s
2xsmbclient pulling data from WinXP = ~8MB/s
3xsmbclient
Volker Lendecke wrote:
smbclient pulling data from WinXP = ~4MB/s
2xsmbclient pulling data from WinXP = ~8MB/s
3xsmbclient pulling data from WinXP = ~11MB/s
Which smbclient version?
Last time I tested I was using 2.4.2. I'll try again with 2.4.3 ASAP.
--
Diego Zuccato
Servizi Informatici
On Fri, Feb 26, 2010 at 02:13:45PM +0100, Diego Zuccato wrote:
Volker Lendecke wrote:
smbclient pulling data from WinXP = ~4MB/s
2xsmbclient pulling data from WinXP = ~8MB/s
3xsmbclient pulling data from WinXP = ~11MB/s
Which smbclient version?
Last time I tested I was using 2.4.2. I'll try
This is not the whole truth. With smbclient command line tool I have
the same exact problem (max 3,8MB/s).
b.
On 9 February 2010 17:19, Jeremy Allison j...@samba.org wrote:
On Tue, Feb 09, 2010 at 10:25:44AM -0500, Lennart Sorensen wrote:
On Tue, Feb 09, 2010 at 01:19:40AM +0100, Bostjan
On Tue, Feb 09, 2010 at 01:19:40AM +0100, Bostjan Skufca wrote:
Then I am greedier (if I also strive for 11MB/s:) Thanks for reminding
me though.
Can/Did someone push it over 10MB/s (or 100MB/s with 1Gbps ethernet))?
To Jeremy or someone who is involved in samba as a developer: do any
On Tue, Feb 09, 2010 at 10:25:44AM -0500, Lennart Sorensen wrote:
On Tue, Feb 09, 2010 at 01:19:40AM +0100, Bostjan Skufca wrote:
Then I am greedier (if I also strive for 11MB/s:) Thanks for reminding
me though.
Can/Did someone push it over 10MB/s (or 100MB/s with 1Gbps ethernet))?
Ok, a quick questions for everyone:
Can you max a 100Mbps ethernet connection to SMBD server using
smbclient or mount.cifs?
What transfer speeds can you reach? 8MB/s, 10MB/s, 11,5MB/s?
Thanks everybody,
b.
PS: Because if you can and I can't, that means only I have a client
side problem.
On
On Mon, Feb 08, 2010 at 08:53:11PM +0100, Bostjan Skufca wrote:
Ok, a quick questions for everyone:
Can you max a 100Mbps ethernet connection to SMBD server using
smbclient or mount.cifs?
What transfer speeds can you reach? 8MB/s, 10MB/s, 11,5MB/s?
Thanks everybody,
b.
PS: Because
Thanks!
We have a bidder at 7,5 MB/s, do I hear more? Do we have 8 MB/s? :)
b.
On 8 February 2010 21:27, Lennart Sorensen lsore...@csclub.uwaterloo.ca wrote:
On Mon, Feb 08, 2010 at 08:53:11PM +0100, Bostjan Skufca wrote:
Ok, a quick questions for everyone:
Can you max a 100Mbps ethernet
Bostjan Skufca put forth on 2/8/2010 4:07 PM:
Thanks!
We have a bidder at 7,5 MB/s, do I hear more? Do we have 8 MB/s? :)
8.5MB/s here from both (an old) smbclient and Winders 2K/XP. But, of course,
you already knew that from my previous posts. Just getting it into this thread
for your
Then I am greedier (if I also strive for 11MB/s:) Thanks for reminding
me though.
Can/Did someone push it over 10MB/s (or 100MB/s with 1Gbps ethernet))?
To Jeremy or someone who is involved in samba as a developer: do any
particular kernel options influence performance of smbclient, that you
Jeremy Allison put forth on 2/6/2010 11:07 PM:
On Sat, Feb 06, 2010 at 09:26:32PM -0600, Stan Hoeppner wrote:
Bostjan Skufca put forth on 2/6/2010 6:14 PM:
Hello everybody!
This is probably going to be a classic question but I cannot find a
decent answer on net.
I have samba server set up
My case is slightly different. Only 2 combinations are interesting
when compared:
1. WinXXX client --- smbd(max)
2. smbclient--- smbd(1/3)
The first combo maxes the wire with only 1 client connected, in any
direction (GET/PUT).
The second, however, seems to work at 1/3 of wire
Hello everybody!
This is probably going to be a classic question but I cannot find a
decent answer on net.
I have samba server set up and the following things work flawlessly:
- iperf shows 92% link utilization
- FTP/SCP/HTTP transfers work in 10MB/s range.
However, when I mount samba share
Bostjan Skufca put forth on 2/6/2010 6:14 PM:
Hello everybody!
This is probably going to be a classic question but I cannot find a
decent answer on net.
I have samba server set up and the following things work flawlessly:
- iperf shows 92% link utilization
- FTP/SCP/HTTP transfers work
Yes, I've forgot to mention that I can also get link saturated with
single Win client, therefore it does not appear to be a server issue.
BTW: Slack, samba compiled from scratch (v3.4.5) and custom vanilla
kernel (but nothing fancy or unusual).
b.
PS: The funny thing is, as I recall, I did
On Sat, Feb 06, 2010 at 09:26:32PM -0600, Stan Hoeppner wrote:
Bostjan Skufca put forth on 2/6/2010 6:14 PM:
Hello everybody!
This is probably going to be a classic question but I cannot find a
decent answer on net.
I have samba server set up and the following things work
18 matches
Mail list logo