Dear all, I have a workgroup withonly windows 200 workstations in it and one Samba version 2.212 The network is bridged with a subnet mask 255.255.255.240
>From the WAN side you get: Internet > Modem/router > first NIC > firewall and out to LAN via second NIC Because the second NIC has no IP address the browsing is done by the first NIC avoiding that the information is not going out to the WAN by making the firewall rules. Altough i did make the sentence inside the firewall pass any from any i did not get the name of the server vissible in the workgroup. Only the win2K workstations where visible The IP parameters where set to subnetmask 255.255.255.240 this includes all the workstations and the first NIC from the firewall. After changing the subnetmask to 255.255.255.0 i see the server joining the workgroup and I could access him. Could someone give me a answer on the following question: Is browsing from samba only on the address xxx.xxx.xxx.255 and not on lower address if used with different subnetmask? Like subnetmask =255.255.255.240 = 15 IP addresses per group browse adress first group = xxx.xxx.xxx.15 second group = xxx.xxx.xxx.31 third group = xxx.xxx.xxx.47 and so on until xxx.xxx.xxx.255 Regards, Ronald RiemVis -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba