Ralph Little writes:
> Since you have a USB connection, the device name is likely to change
> every time you power cycle the scanner as the USB subsystem will
> assign a different address.
Thanks for pointing that out!
> Leaving only the fujitsu backend available in the dll.conf file, the
>
Ralph Little writes:
> If you don't specify the scanner to scanimage with the -d option, then
> it will poll around all the backends to obtain a list of the available
> scanners first. This typically can take quite a good few seconds.
This is the explanation, thanks! Glad I asked. Now this is
"m. allan noah" writes:
> What debugging messages are produced right before the delay?
Not a single one. It just sits there for close to ten seconds, before
the first message appears.
Find the first 200 lines of debug messages attached, generated with:
SANE_DEBUG_EPJITSU=255 scanimage -o
The Fujitsu fi-65F can scan an A6 page in just one second. This works
as advertised with the included “PaperStream Capture”. It even works
when using SANE, except that before each scan there is a delay of almost
ten (!) seconds:
$ cat /etc/lsb-release
LSB_VERSION=1.4
DISTRIB_ID=Arch