Thomas Frayne t...@sjpc.org writes:
I am running FC3 with kernel 2.6.10-1.241_FC3 and sane-backends
1.0.15-1.4. I downloaded iscan-1.14.0-3.i386.rpm from
http://www.avasys.jp/english/linux_e/dl_scan.html, and installed it with
the rpm command.
I had no trouble doing scans with the Epson
I've upgraded to FC 3. Xsane reports no scanner found, but if I unplug
and plug the USB cable, it works. I know, its problaly not a SANE
problem, but does anybody know a fix ??
I've already tried the FC 2 trick with
chmod 0666 $DEVICE
at the end of /etc/hotplug/usb/libusbscanner, but it dosnt
I have been using the Fujitsu M3091DC for about 2.5
years. I would like to upgrade to a scanner higher
quality faster document scanner, preferrably one that
can handle odd sized pages ( smaller than 8.5 by 11
) and would not require that I darken a document by
fotocopying it first. Above all the
No idea?
Le samedi 09 avril 2005 =C3=A0 01:54 +0200, NM Lists a =C3=A9crit :
Hi all,
=20
When I scan through sane+xsane, the images on my Canon Lide20 show a
calibration problem; the left side of the image is much clearer than th=
e
right side. However, with the Canon drivers on Windows,
Hi Stef,
Thank you for answering my question. I cannot imagine that endpoint 0x82
isn't a bulk write endpoint on GL841. There is a successful bulk write
in my trace using endpoint 0x82. It is after genesys_create_slope_table:
[genesys] genesys_bulk_write_register (size = 162)
[sanei_usb]
