Konstantin Svist fry.kun at gmail.com writes:
Olaf Meeuwissen wrote:
It (iscan) doesn't upload firmware for the CX7400. Moreover, firmware
uploads would be lost when you power-down the device (long enough).
I'm curious as to how you installed and removed iscan. My current
best bet is that
Konstantin Svist fry.kun at gmail.com writes:
Olaf Meeuwissen wrote:
This model will be supported by the upcoming 2.10.0 release of iscan.
Neat! Is there a schedule that would tell me approximately when 2.10.0
will be released?
I can't really give a date but we're aiming for first half of
Konstantin Svist fry.kun at gmail.com writes:
Olaf Meeuwissen wrote:
All you have to do is install iscan and pick a device that mentions
the epkowa backend. If you comment the epson backend out in dll.conf,
there is no need to pick one.
If you leave the epson backend enabled, XSane will
Hi there,
I was wondering if support for Epson CX7400 could be added.
I saw a bunch of close model numbers are supported, so it's probably not
too hard (I just don't know how to do it)
I tried following instructions on
http://linuxprinting.org/show_printer.cgi?recnum=Epson-Stylus_DX7400
Olaf Meeuwissen wrote:
This model will be supported by the upcoming 2.10.0 release of iscan.
Neat! Is there a schedule that would tell me approximately when 2.10.0
will be released?
The epson backend seems to have trouble with a number of all-in-one
devices, AFAIK. I have taken a look
Olaf Meeuwissen wrote:
Konstantin Svist fry.kun at gmail.com writes:
Neat! Is there a schedule that would tell me approximately when 2.10.0
will be released?
I can't really give a date but we're aiming for first half of this
month.
Oh, awesome! I was afraid it would be in the
Olaf Meeuwissen wrote:
All you have to do is install iscan and pick a device that mentions
the epkowa backend. If you comment the epson backend out in dll.conf,
there is no need to pick one.
If you leave the epson backend enabled, XSane will show you a little
dialog where you can pick the
