Hi Greg, please post the scanbd.conf and all the included config files (e.g. fujitsu.conf, ...),
Am 21.05.2015 um 15:59 schrieb Greg Kontos: > Thank you, Wilhelm. > > The attached zip contains log files with debug level 7. The file > syslog_20150521 shows the process exiting. The file syslog_start_20150521 > shows the process starting properly with paper loaded into the scanners. > > I have also included > - the *.script files referenced in the scanbd.conf file. > - scanbd is the config file from /etc/default/scanbd > - scanbd.service is the systemctl file from /lib/systemd/system/scanbd.service > > Let me know if there are any more files or test cases that I can run to help > troubleshoot this issue. > > Regards, > G Kontos > > > > > Greg Kontos > LIMS Integration Specialist > > Innovative Diagnostic Laboratory > 8751 Park Central Drive, Suite 200 > Richmond, VA 23227 > Phone: (804) 261-3340 ext.1846 > Cell Phone: > Fax: (804) 515-7291 > mailto:gkon...@myinnovativelab.com > > Visit our website: http://www.myinnovativelab.com > > CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or > previous e-mail messages attached to it contain confidential and/or > privileged information meant for the listed recipient(s) only. You may not > distribute or share this correspondence without written authorization from > the above author. > > If you are not the intended recipient, or a person responsible for delivering > it to the intended recipient, you are hereby notified that any disclosure, > copying, distribution or use of any of the information contained in or > attached to this transmission is STRICTLY PROHIBITED. If you have received > this transmission in error, please immediately notify me by reply e-mail and > destroy the original transmission and its attachments without saving them in > any manner. > > -----Original Message----- > From: Wilhelm [mailto:wilhelm.me...@fh-kl.de] > Sent: Wednesday, May 20, 2015 5:24 PM > To: Greg Kontos; sane-devel@lists.alioth.debian.org > Subject: Re: [sane-devel] Scanbd fails to start with multiple scanners (and > no paper loaded) > > Am 20.05.2015 um 21:24 schrieb Greg Kontos: >> Thank you, Wilhelm. I appreciate you taking the time to look into this. >> >> I am using version 1.4.0-2 of scanbd. This problem does not persist with >> only one scanner. It seems that the scanner will trigger the page-loaded >> action after a scan is complete. So the strange behavior of the scan button >> happens in other situations. >> >> In the attached zip file please find the scanbd.conf and log files. The log >> file shows two startup sequences. The first is without paper loaded in the >> scanner. The second has paper loaded on startup. > > Sorry, but I need all config files (also the included ones) and please start > with debug level = 7. > >> >> Regards, >> G Kontos >> >> >> >> >> Greg Kontos >> LIMS Integration Specialist >> >> Innovative Diagnostic Laboratory >> 8751 Park Central Drive, Suite 200 >> Richmond, VA 23227 >> Phone: (804) 261-3340 ext.1846 >> Cell Phone: >> Fax: (804) 515-7291 >> mailto:gkon...@myinnovativelab.com >> >> Visit our website: http://www.myinnovativelab.com >> >> CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files >> or previous e-mail messages attached to it contain confidential and/or >> privileged information meant for the listed recipient(s) only. You may not >> distribute or share this correspondence without written authorization from >> the above author. >> >> If you are not the intended recipient, or a person responsible for >> delivering it to the intended recipient, you are hereby notified that any >> disclosure, copying, distribution or use of any of the information contained >> in or attached to this transmission is STRICTLY PROHIBITED. If you have >> received this transmission in error, please immediately notify me by reply >> e-mail and destroy the original transmission and its attachments without >> saving them in any manner. >> >> -----Original Message----- >> From: sane-devel >> [mailto:sane-devel-bounces+gkontos=myinnovativelab....@lists.alioth.de >> bian.org] On Behalf Of Wilhelm >> Sent: Wednesday, May 20, 2015 11:55 AM >> To: sane-devel@lists.alioth.debian.org >> Subject: Re: [sane-devel] Scanbd fails to start with multiple scanners >> (and no paper loaded) >> >> Hi Greg, >> >> please >> >> 1) post your scabd config files >> 2) provide scanbd version information >> >> I see a page-load event with no script defined - looks strange. >> >> You said that there wasn't any paper load: so the page-load event get fired >> without any paper load action? More strange. >> >> 3) Can please give the full log from scanbd startup till crash. >> >> Does the problem remain with only one scanner? >> >> >> Am 20.05.2015 um 16:49 schrieb Greg Kontos: >>> Hello, >>> >>> >>> >>> I’m running scanbd on a debian machine with version 1.0.25 of the >>> sane-backend. I installed scanbd using apt-get, sane-backend was >>> compiled from a git clone. I’m using two fujitsu fi-7160 scanners in >>> my setup. The problem: If there is no paper loaded in at least one >>> scanner, scanbd.service will exit the main process and abort. This >>> failure will at a variety of times depending on the circumstances. >>> It will happen during startup of the machine. It will also happen >>> after a few minutes after a scan process is complete. This post-scan >>> behavior is not 100% replicable. >>> >>> >>> >>> The following is /var/log/syslog after a system restart. : (I can >>> provide a more detailed log if that will be helpful) >>> >>> >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Starting Paths. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Reached target Paths. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Starting Timers. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Reached target Timers. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Starting Sockets. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Reached target Sockets. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Starting Basic System. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Reached target Basic System. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Starting Default. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Reached target Default. >>> >>> May 20 09:36:40 hp6300pro-23 systemd[1151]: Startup finished in 4ms. >>> >>> May 20 09:37:06 hp6300pro-23 scanbd: /usr/sbin/scanbd: trigger action >>> for page-loaded for device fujitsu:fi-7160:188290 with script (null) >>> >>> May 20 09:37:07 hp6300pro-23 scanbd: /usr/sbin/scanbd: trigger action >>> for page-loaded for device fujitsu:fi-7160:187984 with script (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: scanbd: sane.c:852: sane_poll: >>> Assertion `st->triggered_option < st->num_of_options_with_scripts' failed. >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: dbus >>> match type='signal',interface='org.freedesktop.Hal.Manager' >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:188290 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:187984 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:188290 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:188290 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:188290 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:188290 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 scanbd[542]: /usr/sbin/scanbd: trigger >>> action for page-loaded for device fujitsu:fi-7160:187984 with script >>> (null) >>> >>> May 20 09:40:13 hp6300pro-23 systemd[1]: scanbd.service: main process >>> exited, code=killed, status=6/ABRT >>> >>> May 20 09:40:13 hp6300pro-23 systemd[1]: Unit scanbd.service entered >>> failed state. >>> >>> >>> >>> It may be worth noting that there was no paper loaded in the scanners >>> when this log file was created. Also, after the service exits, the >>> scanners can both be found using scanimage –L. >>> >>> >>> >>> Currently I’ve found a work around : If a piece of paper is kept >>> loaded in the scanners, the process starts properly after boot and >>> seems to stay active. Should my use case work with scanbd? Does >>> anyone know of a better work around? Perhaps there is an option or >>> setting that I have overlooked? Thank you for any help with this issue. >>> >>> >>> >>> Thanks, >>> G Kontos >>> >>> >>> >>> Greg Kontos >>> LIMS Integration Specialist >>> >>> Innovative Diagnostic Laboratory >>> 8751 Park Central Drive, Suite 200 >>> Richmond, VA 23227 >>> Phone: (804) 261-3340 ext.1846 >>> Cell Phone: >>> Fax: (804) 515-7291 >>> gkon...@myinnovativelab.com <mailto:gkon...@myinnovativelab.com> >>> >>> Visit our website: www.myinnovativelab.com >>> <http://www.myinnovativelab.com> >>> >>> <http://> >>> >>> CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, >>> files or previous e-mail messages attached to it contain confidential >>> and/or privileged information meant for the listed recipient(s) only. >>> You may not distribute or share this correspondence without written >>> authorization from the above author. >>> >>> If you are not the intended recipient, or a person responsible for >>> delivering it to the intended recipient, you are hereby notified that >>> any disclosure, copying, distribution or use of any of the >>> information contained in or attached to this transmission is STRICTLY >>> PROHIBITED. >>> If you have received this transmission in error, please immediately >>> notify me by reply e-mail and destroy the original transmission and >>> its attachments without saving them in any manner. >>> >>> >>> >>> >>> >> >> >> -- >> Wilhelm >> >> -- >> sane-devel mailing list: sane-devel@lists.alioth.debian.org >> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel >> Unsubscribe: Send mail with subject "unsubscribe your_password" >> to sane-devel-requ...@lists.alioth.debian.org >> > > > -- > Wilhelm > -- Wilhelm -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org