Thierry
udo echo "canon_pixma" >> /etc/sane.d/dll.conf # for activate the backend
in sane ?
Yes, I actually added it by hand using vi and it is there
[testuser@localhost ~]$ cat /etc/sane.d/dll.conf
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
kds_i1200 would have to provide button support. I suggest you contact kodak.
allan
On Fri, Aug 18, 2017 at 12:14 AM, fm8758ye wrote:
> I am trying to implement scanbd with the scanner as a scan station. However,
> I got stopped at the first step as scanimage -A only shows
Le 2017-08-18 13:21, Javier Perez a écrit :
Hi Thiery.
Installed both scangearmp2-3.40-2.x86_64.rpm and
scangearmp2-debuginfo-3.40-2.x86_64.rpm
on a new virtual FC26 system.
When I try scangearmp2, it cannot locate the scanner. I turned off the
firewall just in case but still It cannot locate
Hi Thiery.
Installed both scangearmp2-3.40-2.x86_64.rpm and
scangearmp2-debuginfo-3.40-2.x86_64.rpm
on a new virtual FC26 system.
When I try scangearmp2, it cannot locate the scanner. I turned off the
firewall just in case but still It cannot locate the scanner. I can ping
the scanner without
Hello,
scanbd depends on sane to detect button presses. For rare cases there is
the old scanbuttond backend included into the sources of scanbd. In this
case, you have to manually compile and install scanbd.
In the log-file you will find all options (including the buttons id they
are detected by