Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2020-01-01 Thread Ulf Zibis 

Happy new year,

Am 26.11.19 um 12:40 schrieb thie...@ordissimo.com:

Your system is not clean. The only drivers available are proprietary.
Tested with a clean live usb system, adding only brscan3.

I was not able to find the problem in that system, but I was successful
on a new Ubuntu 18.04 installation with:
- sane-utils from ppa:rolfbensch/sane-git
- sudo echo 'brother3' >> /etc/sane.d/dll.conf (it's not "brscan3")
- run "Driver install tool" from
https://support.brother.com/g/b/downloadlist.aspx?c=de=de=dcp7030_all=128=English#SelectLanguageType-566_0_1
- tweaks from https://help.ubuntu.com/community/sane_Troubleshooting#Brother
- restart machine

I did not have to add group "scanner".

Thanks for your help and hints,

-Ulf

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-26 Thread Ulf Zibis 

Thanks Thierry!

Am 26.11.19 um 07:55 schrieb Thierry Hucard:

Install xsane:
# sudo apt-get install xsane

xsane is installed allready, but it too doesn't find the scanner.


If it works not tested on a live usb.


Sorry, I do not understand, what you mean by this sentence.




Télécharger BlueMail pour Android 
Le 25 nov. 2019, à 23:07, Ulf Zibis mailto:ulf.zi...@gmx.de>> a écrit:

Hi Thierry (and others),

have you missed my last message?

Do you have any other advices, what I can try additionally?

-Ulf

Am 21.11.19 um 19:17 schrieb Ulf Zibis:

Am 21.11.19 um 18:35 schrieb thie...@ordissimo.com:

the deposit no longer exists! Used a safe repo! sudo
add-apt-repository ppa:rolfbensch/sane-git sudo apt-get
update # sudo apt update # apt-get install sane-utils
restart # scanimage -L

Done! After restart: jannis@MS-7616:~$ sudo scanimage -L No
scanners were identified. If you were expecting something
different, check that the scanner is plugged in, turned on and
detected by the sane-find-scanner tool (if appropriate).
Please read the documentation which came with this software
(README, FAQ, manpages). jannis@MS-7616:~$ lsusb Bus 002
Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia
Card Reader Bus 002 Device 002: ID 8087:0020 Intel Corp.
Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002
Linux Foundation 2.0 root hub Bus 001 Device 004: ID 04f9:01ea
Brother Industries, Ltd DCP-7030 <<<* Bus 001 Device 003:
ID 04f2:0719 Chicony Electronics Co., Ltd Bus 001 Device 002:
ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001
Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub So the
scanner is still not recognized by SANE.

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-25 Thread Ulf Zibis 

Hi Thierry (and others),

have you missed my last message?

Do you have any other advices, what I can try additionally?

-Ulf

Am 21.11.19 um 19:17 schrieb Ulf Zibis:

Am 21.11.19 um 18:35 schrieb thie...@ordissimo.com:

the deposit no longer exists!
Used a safe repo!
sudo add-apt-repository ppa:rolfbensch/sane-git
sudo apt-get update

# sudo apt update
# apt-get install sane-utils
restart
# scanimage -L

Done!

After restart:

jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~$ lsusb
Bus 002 Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030<<<*
Bus 001 Device 003: ID 04f2:0719 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

So the scanner is still not recognized by SANE.

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-21 Thread Ulf Zibis 


Am 21.11.19 um 17:32 schrieb thie...@ordissimo.com:
> Le 2019-11-21 17:28, Ulf Zibis a écrit :
>> Hi Thierry,
>>
>> What should I enter for the nodename here? :
>>> brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x
>>
> It is for network scanning


===>>  How can I delete the network node again, just to have the system
clean?

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-21 Thread Ulf Zibis 


Am 21.11.19 um 18:35 schrieb thie...@ordissimo.com:
> the deposit no longer exists!
> Used a safe repo!
> sudo add-apt-repository ppa:rolfbensch/sane-git
> sudo apt-get update
>
> # sudo apt update
> # apt-get install sane-utils
> restart
> # scanimage -L

Done!

After restart:

jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~$ lsusb
Bus 002 Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030
Bus 001 Device 003: ID 04f2:0719 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-21 Thread Ulf Zibis 


Am 21.11.19 um 17:57 schrieb thie...@ordissimo.com:
>
> Ok
> # sudo dpkg -P brscan3
>
> If your system is 32bit
> # wget
> https://download.brother.com/welcome/dlf006641/brscan3-0.2.13-1.i386.deb
> else
> #
> https://download.brother.com/welcome/dlf006642/brscan3-0.2.13-1.amd64.deb
>
> Then:
> # sudo dpkg -i --force-all brscan3-0.2.13-1..deb #  if 32bit
> then i386 else amd64
> # sudo apt update
> # sudo apt install -f
>
> Test
jannis@MS-7616:~/Projects/Brother scanner$ sudo dpkg -P brscan3
(Lese Datenbank ... 312140 Dateien und Verzeichnisse sind derzeit
installiert.)
Entfernen von brscan3 (0.2.11-5) ...
Löschen der Konfigurationsdateien von brscan3 (0.2.11-5) ...
dpkg: Warnung: Während Entfernens von brscan3 ist Verzeichnis
»/usr/local« nicht leer, wird daher nicht gelöscht
jannis@MS-7616:~/Projects/Brother scanner$
https://download.brother.com/welcome/dlf006642/brscan3-0.2.13-1.amd64.deb
bash:
https://download.brother.com/welcome/dlf006642/brscan3-0.2.13-1.amd64.deb:
Datei oder Verzeichnis nicht gefunden
jannis@MS-7616:~/Projects/Brother scanner$ wget
https://download.brother.com/welcome/dlf006642/brscan3-0.2.13-1.amd64.deb
--2019-11-21 18:21:37-- 
https://download.brother.com/welcome/dlf006642/brscan3-0.2.13-1.amd64.deb
Auflösen des Hostnamens download.brother.com (download.brother.com) …
23.211.9.151
Verbindungsaufbau zu download.brother.com
(download.brother.com)|23.211.9.151|:443 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 67650 (66K) [image/x-deb]
Wird in »brscan3-0.2.13-1.amd64.deb« gespeichert.

brscan3-0.2.13-1.am 100%[===>]  66,06K  --.-KB/s    in
0,06s  

2019-11-21 18:21:37 (1,05 MB/s) - »brscan3-0.2.13-1.amd64.deb«
gespeichert [67650/67650]

jannis@MS-7616:~/Projects/Brother scanner$ sudo dpkg -i --force-all
brscan3-0.2.13-1.amd64.deb
Vormals nicht ausgewähltes Paket brscan3 wird gewählt.
(Lese Datenbank ... 312120 Dateien und Verzeichnisse sind derzeit
installiert.)
Vorbereitung zum Entpacken von brscan3-0.2.13-1.amd64.deb ...
Entpacken von brscan3 (0.2.13-1) ...
brscan3 (0.2.13-1) wird eingerichtet ...
jannis@MS-7616:~/Projects/Brother scanner$ sudo apt update
OK:1 http://de.archive.ubuntu.com/ubuntu bionic InRelease
Holen:2 http://security.ubuntu.com/ubuntu bionic-security InRelease
[88,7 kB] 
OK:3 http://de.archive.ubuntu.com/ubuntu bionic-updates
InRelease 
OK:4 http://ppa.launchpad.net/audio-recorder/ppa/ubuntu bionic
InRelease  
Ign:5 http://dl.google.com/linux/chrome/deb stable
InRelease  
OK:6 http://de.archive.ubuntu.com/ubuntu bionic-backports
InRelease   
OK:7 http://linux.teamviewer.com/deb stable
InRelease 
OK:8 http://dl.google.com/linux/chrome/deb stable
Release 
OK:9 http://archive.canonical.com/ubuntu bionic
InRelease 
OK:10 http://ppa.launchpad.net/brandonsnider/cdrtools/ubuntu bionic
InRelease
OK:11 http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu
bionic InRelease
OK:12 http://ppa.launchpad.net/flexiondotorg/audio/ubuntu bionic
InRelease
Fehl:13 http://ppa.launchpad.net/gunnarhj/sane-backends/ubuntu bionic
InRelease
  403  Forbidden [IP: 91.189.95.83 80]
Paketlisten werden gelesen... Fertig
E: Fehlschlag beim Holen von
http://ppa.launchpad.net/gunnarhj/sane-backends/ubuntu/dists/bionic/InRelease
403  Forbidden [IP: 91.189.95.83 80]
E: Das Depot »http://ppa.launchpad.net/gunnarhj/sane-backends/ubuntu
bionic InRelease« ist nicht mehr signiert.
N: Eine Aktualisierung von solch einem Depot kann nicht auf eine sichere
Art durchgeführt werden, daher ist es standardmäßig deaktiviert.
N: Weitere Details zur Erzeugung von Paketdepots sowie zu deren
Benutzerkonfiguration finden Sie in der Handbuchseite apt-secure(8).
jannis@MS-7616:~/Projects/Brother scanner$ sudo apt install -f
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.  
Statusinformationen werden eingelesen Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 4 nicht aktualisiert.
jannis@MS-7616:~/Projects/Brother scanner$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~/Projects/Brother scanner$ lsusb
Bus 002 Device 004: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 002 Device 003: ID 058f:6360 Alcor Micro Corp. Multimedia Card Reader
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f9:01ea Brother Industries, Ltd DCP-7030
Bus 001 Device 003: ID 04f2:0719 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-21 Thread Ulf Zibis 


Am 21.11.19 um 17:45 schrieb thie...@ordissimo.com:
> Le 2019-11-21 17:43, Ulf Zibis a écrit :
>> Am 21.11.19 um 17:32 schrieb thie...@ordissimo.com:
>>> Le 2019-11-21 17:28, Ulf Zibis a écrit :
 Hi Thierry,

 thanks again for your effort.

 The scanner still doesn't work.

 What should I enter for the nodename here? :
> brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x

>>> It is for network scanning
>> OK. How can I delete the network node, just to have the system clean?
>>
>>> Try:
>>> # sudo scan picture -L
> Sorry, try
> # sudo scanimage -L
jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-21 Thread Ulf Zibis 
Hi Thierry,

thanks again for your effort.

The scanner still doesn't work.

What should I enter for the nodename here? :
> brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x

Here my new output:
=
jannis@MS-7616:~$ id
uid=1000(jannis) gid=1000(jannis)
Gruppen=1000(jannis),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),118(scanner),126(sambashare)
jannis@MS-7616:~$ apt policy brother-udev-rule-type1
brother-udev-rule-type1:
  Installiert:   1.0.0-1
  Installationskandidat: 1.0.0-1
  Versionstabelle:
 *** 1.0.0-1 100
    100 /var/lib/dpkg/status
jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~$ brsaneconfig3 -a name=DCP7030 model=DCP-7030
nodename=libusb:001:004
"DCP7030" is already registered.
jannis@MS-7616:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0xc312 at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x058f/0x6360 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:001:004
could not open USB device 0x04f2/0x0719 at 001:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.


-Ulf

Am 20.11.19 um 17:02 schrieb thie...@ordissimo.com:
> Le 2019-11-20 16:48, thie...@ordissimo.com a écrit :
>> Le 2019-11-20 16:04, Ulf Zibis a écrit :
>>> Hi Thierry,
>>>
>>> I now again had access to the computer of my friend.
>>>
 sudo echo 'brother3' >> /etc/sane.d/dll.conf
>>> Now I see, that this has already been done. I missed it first, because
>>> 'brother3' was at the end of the file and not sorted alphabetically.
>>>
>>> So now I still have the question, where I can find the ip or the
>>> nodename for the brsaneconfig3 command.
>>> Where can I find it?
>>>
>>> In the mean time I just tried this:
>>> 
>>> jannis@MS-7616:~$ sane-find-scanner
>>>
>>>   # sane-find-scanner will now attempt to detect your scanner. If the
>>>   # result is different from what you expected, first make sure your
>>>   # scanner is powered up and properly connected to your computer.
>>>
>>>   # No SCSI scanners found. If you expected something different, make
>>> sure that
>>>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>
>>> could not open USB device 0x046d/0xc312 at 002:004: Access denied
>>> (insufficient permissions)
>>> could not open USB device 0x058f/0x6360 at 002:003: Access denied
>>> (insufficient permissions)
>>> could not open USB device 0x8087/0x0020 at 002:002: Access denied
>>> (insufficient permissions)
>>> could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
>>> (insufficient permissions)
>>> found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:001:004
>>> could not open USB device 0x04f2/0x0719 at 001:003: Access denied
>>> (insufficient permissions)
>>> could not open USB device 0x8087/0x0020 at 001:002: Access denied
>>> (insufficient permissions)
>>> could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
>>> (insufficient permissions)
>>>   # Your USB scanner was (probably) detected. It may or may not be
>>> supported by
>>>   # SANE. Try scanimage -L and read the backend's manpage.
>>>
>>>   # Not checking for parallel port scanners.
>>>
>>>   # Most Scanners connected to the parallel port or other proprietary
>>> ports
>>>   # can't be detected by this program.
>>>
>>>   # You may want to run this program as root to find all devices. Once
>>> you
>>>   # found the scanner devices, be sure to adjust access permissions as
>>>   # necessary.

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-20 Thread thierry 

Le 2019-11-20 16:48, thie...@ordissimo.com a écrit :

Le 2019-11-20 16:04, Ulf Zibis a écrit :

Hi Thierry,

I now again had access to the computer of my friend.


sudo echo 'brother3' >> /etc/sane.d/dll.conf

Now I see, that this has already been done. I missed it first, because
'brother3' was at the end of the file and not sorted alphabetically.

So now I still have the question, where I can find the ip or the
nodename for the brsaneconfig3 command.
Where can I find it?

In the mean time I just tried this:

jannis@MS-7616:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0xc312 at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x058f/0x6360 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:001:004
could not open USB device 0x04f2/0x0719 at 001:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once
you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
jannis@MS-7616:~$ brsaneconfig3 -a name=DCP7030 model=DCP-7030
nodename=libusb:001:004
jannis@MS-7616:~$ scanimage -L

No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


Add your user to the scanner group:
# sudo adduser  scanner
Simply install this package, then unplug and reconnect the scanner's USB 
connector

http://www.brother.com/pub/bsc/linux/dlf/brother-udev-rule-type1-1.0.0-1.all.deb



jannis@MS-7616:~$ brsaneconfig3 -a name=DCP7030 model=DCP-7030
nodename=001:004
"DCP7030" is already registered.


What to try next?
How to unregister the probably wrong entry with brsaneconfig3?

-Ulf

Am 15.11.19 um 13:13 schrieb Thierry Hucard:


Sorry, use :

sudo echo 'brother3' >> /etc/sane.d/dll.conf

Télécharger BlueMail pour Android [1]
Le 15 nov. 2019, à 12:35, Ulf Zibis  a écrit:

Am 15.11.19 um 09:15 schrieb thie...@ordissimo.com: Le 2019-11-15
08:40, thie...@ordissimo.com a écrit : Configure your scanner :
brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x or
brsaneconfig3 -a name=DCP7030 model=DCP-7030 ip=xx.xx.xx.xx I
forgot, you have to activate the backends: # echo 'brother3' >>
/etc/sane.d/dll.conf

 I did not find this entry in dll.conf, should I add it manually? s
-Ulf

Links:
--
[1] http://www.bluemail.me/r?b=15726

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-20 Thread thierry 

Le 2019-11-20 16:04, Ulf Zibis a écrit :

Hi Thierry,

I now again had access to the computer of my friend.


sudo echo 'brother3' >> /etc/sane.d/dll.conf

Now I see, that this has already been done. I missed it first, because
'brother3' was at the end of the file and not sorted alphabetically.

So now I still have the question, where I can find the ip or the
nodename for the brsaneconfig3 command.
Where can I find it?

In the mean time I just tried this:

jannis@MS-7616:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0xc312 at 002:004: Access denied
(insufficient permissions)
could not open USB device 0x058f/0x6360 at 002:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 002:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied
(insufficient permissions)
found USB scanner (vendor=0x04f9, product=0x01ea) at libusb:001:004
could not open USB device 0x04f2/0x0719 at 001:003: Access denied
(insufficient permissions)
could not open USB device 0x8087/0x0020 at 001:002: Access denied
(insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied
(insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once
you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
jannis@MS-7616:~$ brsaneconfig3 -a name=DCP7030 model=DCP-7030
nodename=libusb:001:004
jannis@MS-7616:~$ scanimage -L

No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
jannis@MS-7616:~$ sudo scanimage -L

No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


Add your user to the scanner group:
# sudo adduser  scanner


jannis@MS-7616:~$ brsaneconfig3 -a name=DCP7030 model=DCP-7030
nodename=001:004
"DCP7030" is already registered.


What to try next?
How to unregister the probably wrong entry with brsaneconfig3?

-Ulf

Am 15.11.19 um 13:13 schrieb Thierry Hucard:


Sorry, use :

sudo echo 'brother3' >> /etc/sane.d/dll.conf

Télécharger BlueMail pour Android [1]
Le 15 nov. 2019, à 12:35, Ulf Zibis  a écrit:

Am 15.11.19 um 09:15 schrieb thie...@ordissimo.com: Le 2019-11-15
08:40, thie...@ordissimo.com a écrit : Configure your scanner :
brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x or
brsaneconfig3 -a name=DCP7030 model=DCP-7030 ip=xx.xx.xx.xx I
forgot, you have to activate the backends: # echo 'brother3' >>
/etc/sane.d/dll.conf

 I did not find this entry in dll.conf, should I add it manually? s
-Ulf

Links:
--
[1] http://www.bluemail.me/r?b=15726

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-15 Thread Ulf Zibis 


Am 15.11.19 um 09:15 schrieb thie...@ordissimo.com:
> Le 2019-11-15 08:40, thie...@ordissimo.com a écrit :
>> Configure your scanner :
>>    brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x
>> or
>>    brsaneconfig3 -a name=DCP7030 model=DCP-7030 ip=xx.xx.xx.xx
> I forgot, you have to activate the backends:
> # echo 'brother3' >> /etc/sane.d/dll.conf

I did not find this entry in dll.conf, should I add it manually?

-Ulf

Re: [sane-devel] Brother DCP 7030 scanner on Ubuntu 18.04 – please help

2019-11-15 Thread Ulf Zibis 
Much thanks Thierry,

see below ...

Am 15.11.19 um 08:40 schrieb thie...@ordissimo.com:
> Le 2019-11-14 18:46, Ulf Zibis a écrit :
>> Hi,
>>
>> from this site I should use brscan3:
>> https://support.brother.com/g/s/id/linux/en/download_scn.html#brscan3
>>
> Configure your scanner :
>    brsaneconfig3 -a name=DCP7030 model=DCP-7030 nodename=BRN_x
> or
>    brsaneconfig3 -a name=DCP7030 model=DCP-7030 ip=xx.xx.xx.xx
Can you give me a hint, how to find the right nodename or ip?

>
> https://support.brother.com/g/b/downloadlist.aspx?c=fr=fr=dcp7030_all=128=English#SelectLanguageType-566_0_1
>

Hey great. How did you find the printer with the search function on the
Brother site, and how did you know, that its findable in french.
When I search for DCP-7030 on english or german site
, I get:
*   An unexpected error occurred.
   We are now investigating the problem.
   Please wait for a while. *

Is there a link with same content in english or german?

-Ulf