Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
Chris Wysopal cwyso...@veracode.com wrote: In certain cases like aircraft where the economic pain of failure is high you get DO-178B, Software Considerations in Airborne Systems and Equipment Certification. For that type of software you might see the purchase of highly reliable libraries that have also met that certification. Good point! That's like how my former employer (BAE Systems) relied for sales on those who NEEDED a data guard (or whatever) to be on a platform that passed high levels of common criteria evaluation. If it weren't for that, similar software would have run just fine under Linux (even without SE) or even Windows. -Dave -- Dave Aronson - Have Pun, Will Babble | Work: davearonson.com | /\ ASCII -+ Play: davearonson.net | \/ Ribbon Specialization is for insects. | Life: dare2xl.com | /\ Campaign -Robert A. Heinlein | Wife: nasjleti.net| EmailWeb ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
This seems to boil down to an economics problem. Notice how quickly the bean counters showed up after the thread began with a discussion of bugs and complexity. It is just too inexpensive to create new code and there isn't enough economic pain when it fails for anything to change for most software. In certain cases like aircraft where the economic pain of failure is high you get DO-178B, Software Considerations in Airborne Systems and Equipment Certification. For that type of software you might see the purchase of highly reliable libraries that have also met that certification. -Chris From: sc-l-boun...@securecoding.org [mailto:sc-l-boun...@securecoding.org] On Behalf Of Andreas Saurwein Franci Gonçalves Sent: Wednesday, October 14, 2009 9:49 AM To: Secure Coding List Subject: Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson) 2009/10/14 SC-L Reader Dave Aronson securecoding2d...@davearonson.commailto:securecoding2d...@davearonson.com Andreas Saurwein Franci Gonçalves saurw...@gmail.commailto:saurw...@gmail.com wrote (rearranged into correct order): 2009/10/13 Bobby Miller b.g.mil...@gmail.commailto:b.g.mil...@gmail.com The obvious difference is parts. In manufacturing, things are assembled from well-known, well-specified, tested parts. Hmmm Thats the idea of libraries. Well known, well specified, well tested parts. Well, whatever. Ideally, yes. However, programmers love to reinvent the wheel. It's MUCH easier, both to do and to get away with, in software than in hardware... and often necessary. Need a bolt of at least a given length and strength, less than a given diameter? There are standard thread sizes, and people make bolts of most common threadings and lengths, for purchase at reasonable prices, at places easily found, and you can be fairly certain that any given one of them will do the job quite well. Need a function for your program? If it's as common as a bolt, it's probably already built into the very language. If it's nearly as common, maybe there's a fairly standard library for it... and if you're very lucky, it's not too buggy or brittle. Otherwise, it's probably going to be much cheaper (which is all your management probably cares about) to just code the damn thing yourself, than to research who makes such a thing, which ones there are, who says which one is how reliable, which ones have licensing terms your company finds palatable, and justifying your choice to management. Lord help you if it requires money, because then you have to justify it to a higher degree, get the beancounters involved, budgetary authority from possibly multiple layers of manglement, and spend the rest of your days filling out purchase orders. If you do wind up coding it yourself, is the company then going to make that piece of functionality available to the world separately, whether for profit or open source? N times out of N+1, for very large values of N, no way! Will they at least make it available *internally*, so that *they* don't have to reinvent the wheel *next* time? Again, N times out of N+1, for almost as large values of N, no. -Dave Exactly thats the point. Going a bit further, for every piece of hardware engineering, there is almost always a legal, worldwide or at least national standard to follow. This is inexistent in software. As long as anybody with at least one healthy finger is allowed to write and sell software, the current situation will not change. Make software development an engineering discipline with all the rights and obligations of other engineering sciences. No more coding without a license. Point. This would change the landscape of bits and bytes in a dramatic way. But it requires the support of the governments worldwide. My 2 cents (me too would have to get back to college and study some more, although having 25+ years of software development experience) ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
Andreas Saurwein Franci Gonçalves saurw...@gmail.com wrote (rearranged into correct order): 2009/10/13 Bobby Miller b.g.mil...@gmail.com The obvious difference is parts. In manufacturing, things are assembled from well-known, well-specified, tested parts. Hmmm Thats the idea of libraries. Well known, well specified, well tested parts. Well, whatever. Ideally, yes. However, programmers love to reinvent the wheel. It's MUCH easier, both to do and to get away with, in software than in hardware... and often necessary. Need a bolt of at least a given length and strength, less than a given diameter? There are standard thread sizes, and people make bolts of most common threadings and lengths, for purchase at reasonable prices, at places easily found, and you can be fairly certain that any given one of them will do the job quite well. Need a function for your program? If it's as common as a bolt, it's probably already built into the very language. If it's nearly as common, maybe there's a fairly standard library for it... and if you're very lucky, it's not too buggy or brittle. Otherwise, it's probably going to be much cheaper (which is all your management probably cares about) to just code the damn thing yourself, than to research who makes such a thing, which ones there are, who says which one is how reliable, which ones have licensing terms your company finds palatable, and justifying your choice to management. Lord help you if it requires money, because then you have to justify it to a higher degree, get the beancounters involved, budgetary authority from possibly multiple layers of manglement, and spend the rest of your days filling out purchase orders. If you do wind up coding it yourself, is the company then going to make that piece of functionality available to the world separately, whether for profit or open source? N times out of N+1, for very large values of N, no way! Will they at least make it available *internally*, so that *they* don't have to reinvent the wheel *next* time? Again, N times out of N+1, for almost as large values of N, no. -Dave -- Dave Aronson, software engineer or trainer for hire. Looking for job (or contract) in Washington DC area. See http://davearonson.com/ for resume other info. ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
2009/10/14 SC-L Reader Dave Aronson securecoding2d...@davearonson.com Andreas Saurwein Franci Gonçalves saurw...@gmail.com wrote (rearranged into correct order): 2009/10/13 Bobby Miller b.g.mil...@gmail.com The obvious difference is parts. In manufacturing, things are assembled from well-known, well-specified, tested parts. Hmmm Thats the idea of libraries. Well known, well specified, well tested parts. Well, whatever. Ideally, yes. However, programmers love to reinvent the wheel. It's MUCH easier, both to do and to get away with, in software than in hardware... and often necessary. Need a bolt of at least a given length and strength, less than a given diameter? There are standard thread sizes, and people make bolts of most common threadings and lengths, for purchase at reasonable prices, at places easily found, and you can be fairly certain that any given one of them will do the job quite well. Need a function for your program? If it's as common as a bolt, it's probably already built into the very language. If it's nearly as common, maybe there's a fairly standard library for it... and if you're very lucky, it's not too buggy or brittle. Otherwise, it's probably going to be much cheaper (which is all your management probably cares about) to just code the damn thing yourself, than to research who makes such a thing, which ones there are, who says which one is how reliable, which ones have licensing terms your company finds palatable, and justifying your choice to management. Lord help you if it requires money, because then you have to justify it to a higher degree, get the beancounters involved, budgetary authority from possibly multiple layers of manglement, and spend the rest of your days filling out purchase orders. If you do wind up coding it yourself, is the company then going to make that piece of functionality available to the world separately, whether for profit or open source? N times out of N+1, for very large values of N, no way! Will they at least make it available *internally*, so that *they* don't have to reinvent the wheel *next* time? Again, N times out of N+1, for almost as large values of N, no. -Dave Exactly thats the point. Going a bit further, for every piece of hardware engineering, there is almost always a legal, worldwide or at least national standard to follow. This is inexistent in software. As long as anybody with at least one healthy finger is allowed to write and sell software, the current situation will not change. Make software development an engineering discipline with all the rights and obligations of other engineering sciences. No more coding without a license. Point. This would change the landscape of bits and bytes in a dramatic way. But it requires the support of the governments worldwide. My 2 cents (me too would have to get back to college and study some more, although having 25+ years of software development experience) ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
The obvious difference is parts. In manufacturing, things are assembled from well-known, well-specified, tested parts. Hmmm ... If you look at other things that people build, like oil refineries, or commercial aircraft, we can deal with complexity much more effectively than we can with software. The problem with software is that we've never learned how to control the side effects of choices, which we call bugs. ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
Re: [SC-L] Genotypes and Phenotypes (Gunnar Peterson)
Thats the idea of libraries. Well known, well specified, well tested parts. Well, whatever. 2009/10/13 Bobby Miller b.g.mil...@gmail.com The obvious difference is parts. In manufacturing, things are assembled from well-known, well-specified, tested parts. Hmmm ... If you look at other things that people build, like oil refineries, or commercial aircraft, we can deal with complexity much more effectively than we can with software. The problem with software is that we've never learned how to control the side effects of choices, which we call bugs. ___ Secure Coding mailing list (SC-L) SC-L@securecoding.org List information, subscriptions, etc - http://krvw.com/mailman/listinfo/sc-l List charter available at - http://www.securecoding.org/list/charter.php SC-L is hosted and moderated by KRvW Associates, LLC (http://www.KRvW.com) as a free, non-commercial service to the software security community. ___
