On 02/17/2017 09:11 PM, Konstantin Olchanski wrote:
> Hi, there, we told you many things, some hopefully helpful, but you never
> told us what machine you have, and we did ask (twice).
>
> Please, tell us what motherboard you have (from dmidecode) and
> what CPU you have (from /proc/cpuinfo).
On Fri, Feb 17, 2017 at 05:43:50PM -0600, ~Stack~ wrote:
>
> Thank you all very much for your help.
>
Hi, there, we told you many things, some hopefully helpful, but you never
told us what machine you have, and we did ask (twice).
Please, tell us what motherboard you have (from dmidecode) and
Greetings,
Thank you all very much for your help. I wasn't in a position to reply
earlier, but I was watching the updates.
The EDD, I think, was a red herring. Turning it off just meant it locked
the screen without anything being printed at all. I installed to a
different hard drive and got the
On Fri, Feb 17, 2017 at 10:49:17AM -0600, Graham Allan wrote:
>
> I think that's a linux message.
>
Confirmed.
It is the linux kernel sources file arch/x86/boot/edd.c
After printing "Probing EDD", it issues BIOS int13 calls
getting some kind of disk information. Good place to be stuck
with
I think that's a linux message. I've seen this before when output starts
getting redirected to the serial port (or ipmi/iDRAC/iLO virtual serial
port). Maybe check if there is some type of console redirection set up
in the BIOS? It seems to me that when redirection is set up, the BIOS
itself
On Thu, Feb 16, 2017 at 10:07:55PM -0600, ~Stack~ wrote:
> I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot and it
> hangs at:
> "Probing EDD (edd=off to disable)...ok"
That's a BIOS message, not a linux or grub message, yes?
(I do not see any EDD messages in the linux log
On 02/16/2017 10:07 PM, ~Stack~ wrote:
Greetings,
I'm going to keep this "short" because I've just had 6hrs of things I've
tried that didn't work. It would take to long to list them all. :-)
I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot
and it hangs at:
"Probing EDD
On 17/02/17 12:36, ~Stack~ wrote:
> Greetings,
> On 02/17/2017 04:37 AM, Bluejay Adametz wrote:
>>> I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot
>>> and it hangs at:
>>> "Probing EDD (edd=off to disable)...ok"
>>
>> Did you get rid of the "quiet" option on the kernel line?
Greetings,
On 02/17/2017 04:37 AM, Bluejay Adametz wrote:
>> I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot
>> and it hangs at:
>> "Probing EDD (edd=off to disable)...ok"
>
> Did you get rid of the "quiet" option on the kernel line? If not, do
> so, so you're sure to get
> I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot
> and it hangs at:
> "Probing EDD (edd=off to disable)...ok"
Did you get rid of the "quiet" option on the kernel line? If not, do
so, so you're sure to get all the kernel messages. It might not be
hanging where you think it
Stack
Not sure this will help but heres my 10 pence worth
EDD being related to Disk drives this makes me wonder if the correct
firmware is being used but it did somehow eventually get around the
issue eventually - any way you can try say a different hard disk?
Can you boot a live disk on the
Greetings,
I'm going to keep this "short" because I've just had 6hrs of things I've
tried that didn't work. It would take to long to list them all. :-)
I have a bunch of new SuperMicro servers. Installed 7.3 on it. Reboot
and it hangs at:
"Probing EDD (edd=off to disable)...ok"
And by hangs, I
12 matches
Mail list logo
