The first time I installed 163 ejabberd did not work. So I went back and
re-read the install instructions. They imply that you can change the host
name with the command:
domain_config [].
If is not supplied, dnsdomainname is supposed to supply
it, but in my case it always returns 'Unknown
What are the bandwidth requirements for these various voip strategies, sip,
iax2?
Tim
- Original Message -
> Date: Sat, 9 Aug 2008 09:17:31 -0700
> From: "Sameer Verma" <[EMAIL PROTECTED]>
> Subject: Re: [Server-devel] Reschedule XS meeting for Friday Aug 15 -
> or 10 PM Aug 14 EST
Hola Henry,
Quantos adaptadores de red tiene el server? Que dice ifconfig?
Que es el IP del AP Zoom y a cual adaptor esta conectado? Esta cerrado dhcp
en al AP?
Tienes respuesta de ping 172.18.0.1 desde el pc o XO?
Tienes respuesta de http://172.18.0.1? En mi servidor es la pagina por
defe
Did anyone every reply to this? If so, could someone please forward.
--
>
> Message: 2
> Date: Wed, 27 Aug 2008 11:31:25 +0200
> From: Jeff <[EMAIL PROTECTED]>
> Subject: Re: [Server-devel] Pungi minimal installer, comps.xml trick
> To: Martin Langhoff <[EMAIL PROTECT
How does the user get the SOTP pw list?
- Original Message -
From: "Martin Langhoff" <[EMAIL PROTECTED]>
To: "Tony Anderson" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>;
Sent: Thursday, October 09, 2008 6:48 PM
Subject: Re: [Server-devel] XS testing
> On Fri, Oct 10, 2008 at 5:29 AM, T
Hi Gerald,
To expand a bit on what Martin wrote, the XS sits between the XOs and the
world (rest of the network). You haven't said how the XS and AP connect to
each other, but I'm assuming it is via ethernet, that is the AP is not
directly attached via USB. If that is the case the XS needs tw
said below, it needs to be in the subnet of eth1 and
not in the range of DHCP address supplied by the XS.
http://wiki.laptop.org/go/XS_Installing_Software
http://wiki.laptop.org/go/XS_Release_Notes
Tim
- Original Message -
From: Gerald Ardito
To: Tim Moody
Cc: server-devel@lists.
I tried the EatBoom app from
http://git.sugarlabs.org/projects/eatboom/repos/mainline/blobs/master/EatBoom.swf
using Adobe Flashplayer version 10. I got to a point where it said
congratulations on passing level three, but nothing else happened, so I'm
not sure what behavior is expected or how
Here are some comments on a fresh install of 0.6d5. (Some things go by
quickly so it is hard to record them.)
There was a complaint about /var/lib/pgsql/data missing.
There was a complaint about upgrading moodle.
The release notice says 9-0.5.2, but I'm pretty sure is was 0.6d5 and
xs-config on
> Message: 2
> Date: Thu, 01 Oct 2009 14:27:16 -0500
> From: Jerry Vonau
> Subject: Re: [Server-devel] fresh 0.6 install
> To: Tim Moody
> Cc: server-devel@lists.laptop.org
> Message-ID: <1254425236.22407.83.ca...@f9.vonau.ca>
> Content-Type: text/plain
>
> On
ives ip address 172.18.96.2!!
service network status shows eth0, eth1, eth2, lanbond0 configured and eth0,
eth1, lanbond0 active.
- Original Message -
From: "Jerry Vonau"
To: "Tim Moody"
Cc:
Sent: Friday, October 02, 2009 10:47 AM
Subject: Re: [Server-devel] fresh 0.6 inst
fresh 0.6 install went smoothly except for
still says Moodle must be installed or upgraded, but probably bogus because
pgsql is running and client pc in lan net gets moodle login from school
server.
have the install instructions been overly pruned? the ejabberd admin
password set up is gone.
- Original Message -
From: "Martin Langhoff"
To: "Tim Moody"
Cc:
Sent: Friday, October 09, 2009 5:52 PM
Subject: Re: [Server-devel] fresh XS 0.6 install
On Fri, Oct 9, 2009 at 10:20 PM, Tim Moody wrote:
> fresh 0.6 install went smoothly except for
>
> sti
arlabs.org/ticket/916, but I'm not clear if
this is already in soas and anyway the patch seems to expect the xs to
listen on 8080, which I don't think it does.
Help appreciated.
- Original Message -
From: "Martin Langhoff"
To: "Tim Moody"
Cc:
Sent: Saturd
sorry. I was looking for it under httpd.conf. I guess it must be the
'webcache' service.
Anyway, applying the schoolserver.py patch from
http://dev.sugarlabs.org/ticket/916 allowed my soas to register
successfully.
- Original Message -
From: "Martin Langhoff"
would it make sense to modify /etc/services so 8080 is named idmgr? that
would make netstat --listen -pe --inet a little more meaningful.
- Original Message -
From: "Martin Langhoff"
To: "Tim Moody"
Cc:
Sent: Monday, October 12, 2009 3:33 AM
Subject: Re: [Server
tachment/ticket/916/schoolserver.py
reboot
registration should now work
- Original Message -
From:
To: "Tim Moody" ; "Martin Langhoff"
Cc:
Sent: Monday, October 12, 2009 4:08 AM
Subject: Re: [Server-devel] fresh XS 0.6 install
>I am having problem with SoAS regis
Is there a way to unregister a client with the xs?
sugar-control-panel -c register didn't seem to do anything.
___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
User 1 (Admin), who was the first to register with XS, creates a news item
that appears on the home page
User 2 (Teacher) doesn't see it.
Is this expected?
___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/ser
OK the admin manually made the teacher a Teacher and now can see news.
___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
btw, on the first autologin moodle presents the login screen instead of the
home page even though it says you are logged in as ... in the upper right
corner, which is correct, and actually populates the user field with the
user's registration string. this can be a little confusing.
> Message:
Original Message -
From: "Martin Langhoff"
To: "Tim Moody"
Cc:
Sent: Monday, October 19, 2009 6:06 AM
Subject: Re: [Server-devel] moodle autologin
Hi Tim,
that is very weird. Can you reproduce it always? Are you on the
"release" version of 0.6? How do you go to m
Are you sure that registration succeeded? I had a similar problem with SoaS
strawberry (haven't tried blueberry) where registration failed without much
notice. I did the following based on http://dev.sugarlabs.org/ticket/916
start terminal
yum install wget (not in base install of strawberry s
Hi Siisi,
I still don't have an entirely clear picture of your setup, but let me try
to help.
The XS expects, at a minimum, 2 network interfaces, one for WAN and one for
LAN. The WAN interface is usually a network adapter card and has a dynamic
IP address, though it can be static, and connect
Luuk, I think what you want to do, have XOs access content in Moodle on the
XS even if the XS is disconnected from the interner (but not from the LAN),
already works 'out of the box' on XS 0.6 and higher. Martin, I agree that
supporting Moodle content on XOs when they are disconnected from the
I created a directory public under /library into which I copied a few pdfs.
I created a file xs-library-public.conf in /etc/httpd/conf.d which contains
Alias /public/ "/library/public"
Order allow,deny
Allow from all
Options Indexes FollowSymLinks
AllowOverride None
After service httpd
into an email.
- Original Message -
From: "Andra DuPont"
To: "Tim Moody"
Cc:
Sent: Tuesday, April 06, 2010 3:08 PM
Subject: Re: [Server-devel] Public folders
Tim,
I am also looking for a way to have a digital library of .pdf files etc.
that can be accessed by any X
.org/activities?
- Original Message -----
From: "Andra DuPont"
To: "Tim Moody"
Cc:
Sent: Tuesday, April 06, 2010 6:22 PM
Subject: Re: [Server-devel] Public folders
On Apr 6, 2010, at 5:30 PM, Tim Moody wrote:
> Did you restart the web server with service httpd res
Glad you figured it out; I'm sure you're right. Not sure where I got the extra
/ or why it worked on my server.
- Original Message -
From: Andra DuPont
To: Tim Moody
Cc: XS Devel
Sent: Wednesday, April 07, 2010 11:05 AM
Subject: Re: [Server-devel] Public folde
What are the main advantages of wwwoffle over apache's built in proxy and
cache modules?
> Message: 3
> Date: Wed, 7 Apr 2010 23:46:52 -0400
> From: Andra DuPont
> Subject: [Server-devel] Web Caching for Areas with Intermittent
> Internet - WWWOFFLE installation Guide on 0.6 XS Server
> To: XS D
> Working iwth the La Rioja team, I rolled a new moodle-xs RPM that can
> pick $CFG overrides from files dropped in /etc/moodle/conf.d/ .
Based on the example, I assume you mean .php files with valid php code and
that do appropriate assignments to $CFG. Is it possible to break moodle?
Does this
I've been thinking about automating larger deployments as well, though more
the initial install than subsequent updates. As an experiment I put
together a cobbler installation server on FC12
(https://fedorahosted.org/cobbler/) and use etherboot
(http://etherboot.org/wiki/index.php) to boot the
forgot to include the list.
- Original Message -
From: Tim Moody
To: Kevin Mauricio Benavides Castro
Sent: Friday, June 04, 2010 5:33 PM
Subject: Re: public folders in xs 0.6
Hola Kevin,
El nombre en la Alias linea tiene que ser igual a lo de la carpeta. Si la
carpeta es /library
> Message: 1
> Date: Sun, 18 Jul 2010 16:37:34 +1000
> From: "David Leeming"
> Subject: Re: [Server-devel] Offline update
> To: "'Martin Langhoff'"
> Cc: 'XS Devel'
> Message-ID: <01cb2643$b5927610$20b762...@com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Good, Martin
>
> Is it pos
Hi Satya,
Just to be clear, are you following the instructions at
http://wiki.laptop.org/go/XS_Installing_Software and using the XS 0.6 iso as
a CD?
I just tried it on an old Dell, and it progresses for me in kickstart mode.
However, I also tried text mode reinstall with a blank HDD and took a
I have been experimenting for quite awhile with an install server based on
cobbler and have finally written it up here
http://wiki.laptop.org/go/XS_Install_Server.
If you have more than a few servers to install and want to automate the process
or you want to add some library content automatical
Glad to be of help.
--
From: "Alvar Maciel"
Sent: Saturday, April 09, 2011 7:10 AM
>> I have been experimenting for quite awhile with an install server based
>> on
>> cobbler and have finally written it up here
>> http://wiki.laptop.org/go/XS_Inst
not a very thorough test.
--
From: "Sridhar Dhanapalan"
Sent: Friday, April 29, 2011 1:57 AM
To: "Tim Moody"
Cc:
Subject: Re: [Server-devel] XS Install Server
> On 29 April 2011 15:43, Sridhar Dhanapalan wrote:
>> On 9 April 2011 03:16, Tim Moody
This is a great list.
I'd like to add support for the idea that it would be good if the XS could
be layered as follows:
Generic fedora install (or centos to keep it from changing so frequently)
Generic rpms for everything not developed by olpc, including moodle
XS rpms (or scripts) that add (o
Has anyone created a test suite to validate that the XS is functioning
properly? Sameer, is there something along the lines
http://wiki.laptop.org/go/XS_Load_Testing but for functionality, not load?
___
Server-devel mailing list
Server-devel@lists.la
http://wiki.laptop.org/go/XS_Techniques_and_Configuration#Installing_from_USB
has a download for the script, but it seems broken. Where did you get it?
Is it something simple like needing to issue ./mkusbinstall or use sudo?
If you google mkusbinstall there are several versions
http://dev.lapt
You didn't mention the make and model of your WAP, but it sounds like it is
acting as a dhcp server and a dns server. When it hands the xo an ip addr
it also says that it is the dns server (192.168.1.1). I'm guessing the xos
can find each other, just not the server.
Some wireless routers all
George, et. al.,
When I think about how to improve the XS installation process it seems to me
that separating the linux install from the XS packages is a good idea.
Ideally you would install the latest distro (probably of fedora) using the
minimal kickstart file plus packages needed by the xs,
Martin is basically right that you are trying to use the internet to install
the internet. yum can't get the rpms because it has no internet access.
this might help figure out the actual rpms needed. it lists some of the
rpms required and one gotcha where the usb device can look like a thumb
I tried to do an install from OLPC-School-Server-0.7-i386.iso using cobbler.
The olpcxs.ks looks for @olpc-xs, but I don't see it in the Packages
directory. All I see are:
idmgr-0.6.36.ge93529d-1.el6.noarch.rpm
olpc-bios-crypto-0.5.26.g1972d11-1.xs11.i586.rpm
xs-activation-0.3.14.gd2a3727-1.el
funny thing is that it works fine under cobbler. anaconda offered to
reinitialize the partition and I let it, but still didn't help.
From: Martin Langhoff
Sent: Friday, March 30, 2012 7:04 AM
To: Tim Moody
Cc: server-devel@lists.laptop.org
Subject: Re: [Server-devel] xs-pkgs
On M
(btw installing straight from cd never worked for me as it failed on the
disk partitioning regardless of the options I chose)
From a kickstart file or by hand in the installer?
using the cd and taking the kickstart option.
Jerry
___
Server-dev
That is not a package, the "@" makes it a group definition in the
*comps.xml file in /repodata on the XS iso image. You must loopback
mount the iso to view the file, then have a look for that string.
Well, you're right as usual. (also I said xs-pkgs remembering 0.6, when I
should have said o
All of this has been with cobbler since I never got the cd install to work
because it could never format the disk, which btw is a simple 40G drive with
no raid or anything else fancy that has already had Centos and now XS on it.
The target machine can connect to the cobbler server but not beyond
How do you perform the initial installation of these XS servers?
What is your host naming convention so that each looks like schoolserver on
the lan, but some unique name on the wan?
--
Message: 2
Date: Wed, 18 Apr 2012 15:17:25 -0600
From: Daniel Drake
To: Luis
Hi Daniel,
Can you tell me what plans there are for the XS beyond version 0.7 and who
would be undertaking them.
Thanks,
Tim
--
From: "Daniel Drake"
Sent: Tuesday, November 13, 2012 9:05 AM
This should be discussed on server-devel. I'd be ha
as to whether this is as it
should be or not.
--
From: "Daniel Drake"
Sent: Tuesday, November 13, 2012 4:24 PM
To: "Tim Moody"
Cc: "XS Devel"
Subject: Post XS-0.7 plans
Hi,
On Tue, Nov 13, 2012 at 2:08 PM, Tim Mood
I am trying to run the hyperactivity collaboration capacity tests against the
XS installed on an XO as per
http://wiki.laptop.org/go/Ejabberd_resource_tests
http://permalink.gmane.org/gmane.linux.laptop.olpc.devel/24239
I tried turning off iptables and am running as root in an FC 17 vbox on a
I know there have been some XS deployments that used dansguardian . Can
someone give me a config file or some pointers as to how get this to work
with squid and XS networking?
Thanks,
Tim
___
Server-devel mailing list
Server-devel@lists.laptop.or
First, let me say that I don’t find much below to disagree with, though to
paraphrase George’s comments with Tony’s metaphor, I would say that what we
have done so far is take a wheel and get it to work on other makes and newer
models of the vehicle. But this is not our final aim and we are pro
Initially, at least, the expected configuration is that the internal wifi is
used for external access (wan) and the ap is attached to a usb ethernet
device for interanl access (lan).
-Original Message-
From: tkk...@nurturingasia.com
Sent: Saturday, March 02, 2013 8:23 PM
To: Jerry Von
both need to be attached when the install is run and the wifi should be off.
the install looks for an adapter that has access to the gateway and calls it
wan. it then looks for another and calls the last one it finds lan.
-Original Message-
From: tkk...@nurturingasia.com
Sent: Wednes
Over the years there have been a number of expressions of interest in
puppet. Are there any modules out there for actual XS services?
I know about http://dev.laptop.org/git/users/martin/puppet-example/tree/,
which has some manifests.
___
Server-dev
reach the person managing the list at
server-devel-ow...@lists.laptop.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Server-devel digest..."
Today's Topics:
I have installed 0.2.1 on an XO 1.75 successfully in one go and the XO 1.75
server and another XO were both able to register and connect to schoolserver
(without http:// I sometimes get a google search instead of the url), so
either we have regressed or we didn't handle your non-MN machine.
No
This and the other posts in this thread have great data points and anecdotal
evidence. It would be nice to have it synthesized into a wiki page.
From: Kevin Gordon
Sent: Friday, June 07, 2013 8:39 AM
To: John Watlington
Cc: XS Devel ; OLPC Devel
Subject: Re: [Server-devel] School networks and
.
From: Tim Moody
Sent: Thursday, June 27, 2013 3:56 PM
To: James Cameron
Subject: Re: [Server-devel] Testing and comparing wireless setups.
Took a stab a creating a home for the information you suggest.
http://wiki.laptop.org/go/User:Holt/XS_Community_Edition/Wifi_Experience
-Original
Hi Chris,
I am working on a home page for the xsce schoolserver, which I would like to
localize. The method I have used is to turn on multiviews and have
index.en.php, index.es.php, etc. which each have any arbitrary text in the
appropriate language and also make calls, currently to php funct
which commit was fa2d59?
This is the same discussion we had yesterday about when we move from dxs to
xsce. What would be the criteria for deciding to merge the dxs branch into
master?
And it still doesn’t address the question of where ongoing differences between
dxs and xsce will live.
I’m O
>Exactly! I also think it is a risk to have "development" being done in
>xsce:dxs. I would be in favor of just creating a xsce:dxs with all the dxs
>commits, so we don't lose the history, and then we just merge that to the
>xsce:master branch and just continue working there.
>
>WhatSay?
OK, but
should be none. There might be a 100 commits (the dxs history) instead of
the current 1 commit, but the end result of those 100 will be the same.
On Wed, Oct 23, 2013 at 1:11 PM, Tim Moody wrote:
>Exactly! I also think it is a risk to have "development" being done in
xsce:dxs.
we need to have get facts do this, so people don’t have to edit, as we
discussed on a previous call. is anyone working on this or should I?
Tim
From: Anna
Sent: Friday, October 25, 2013 8:11 PM
To: xsce-devel ; Server Devel
Subject: [XSCE] ifcfg-eth# files in /etc/sysconfig/network-scripts ge
I created a page to track migration of xs-config plugin modules to ansible.
http://wiki.laptop.org/go/XS_Community_Edition/0.5/Ansible_Progress
Please edit.
Tim___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo
-Original Message-
From: Braddock
Sent: Sunday, November 10, 2013 12:23 AM
To: xsce-de...@googlegroups.com ; XS Devel
Subject: Re: [XSCE] Fwd: [support-gang] XO tablet can not connect to XSCE
server
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 11/09/2013 04:53 PM, Samuel Greenfe
I originally left the generated list at the bottom of the manual list as a
sort of checksum, so that we can see visually that the two are in sync. A
subsequent editor took it out.
But the work process should always be to add both a feature detail and a
line in the table. I think the Features
I put an empty rpm in
http://xsce.activitycentral.com/downloads/xs-config-999-1.noarch.rpm
Tim___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
How does the os get onto the trimslice?
How do you sudo if the only known user is not a sudoer?
Date: Sat, 16 Nov 2013 12:12:33 -0500
From: George Hunt
To: XS Devel
Subject: [Server-devel] Moving toward headless install on trimslice
for XSCE
Message-ID:
Content-Type: text/plain; charset="iso
The xs-activity-server rpm in use by xsce is 0.3.5.g3b1d13b.1.fc17, which
though a parallel development, looks to be the same as 3.6 in
http://dev.laptop.org/git/users/martin/xs-activity-server/
However the latter also has a 4.0 which implements a more complicated scheme
for creating the html i
xs-activity-server seems to try to create localized index.html files based on
finding linfo files in a given activity (described in
http://wiki.laptop.org/go/Activity_bundles)
but so far, I have not found any activities that have a locale directory with
linfo files even though the contents of t
I take a middle of the road approach, using vbox, but not vagrant.
Some time ago I created a vbox with a minimal FC18 64 bit install, which I
call FC18-64Base and which I periodically yum update and into which I put my
personal account, make myself a sudoer, etc., turn on sshd if necessary.
I
Forgot to mention that on XSCEAnsibleBase you should also
wget http://xsce.activitycentral.com/downloads/xs-config-999-1.noarch.rpm
yum -y localinstall xs-config-999-1.noarch.rpm
Tim
___
Server-devel mailing list
Server-devel@lists.laptop.org
http:/
This idea occurred to me as well. I think we need to be sure about the
kinds of phones that are available. What I read indicates mostly not smart
phones. I believe the highly successful apps, such as mpesa and ushahidi
use sms, not even wap. You then need a cellular gateway.
Message: 1
D
PREAMBLE
xsce has an httpd-xs.conf file in /etc/httpd/conf, which is a customized
version of httpd.conf. It gets used because /etc/sysconfig/httpd has a clause
OPTIONS= -f conf/httpd-xs.conf.
Except that in the ansible install /etc/sysconfig/httpd doesn’t get set.
httpd-xs.conf is definitely
trategy to take over the base conf file.
On Mon, Nov 25, 2013 at 3:01 PM, Tim Moody wrote:
PREAMBLE
xsce has an httpd-xs.conf file in /etc/httpd/conf, which is a customized
version of httpd.conf. It gets used because /etc/sysconfig/httpd has a clause
OPTIONS= -f conf/httpd-xs.conf.
Exce
This was in the morning mail.
http://arduino.cc/en/Main/ArduinoGSMShield. I guess there are a few others
as well.
Tim
___
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
I'm in favor of staying where we are. To me the biggest risk is that the
site one day just disappears. We should have a backup of the content and
deal with it if and when it happens. I'm not sure what the easiest way to
do a backup is.
Tim
___
Se
://wiki.laptop.org/go/XS_Community_Edition/0.4/Testing
https://web.archive.org/web/*/http://wiki.laptop.org/go/XS_Community_Edition/0.4/Testing/Results
On Sat, Nov 30, 2013 at 12:44 PM, Tim Moody wrote:
I'm in favor of staying where we are. To me the biggest risk is that the
site one day
On behalf of the many people working on the latest version of the School Server
Community Edition I am announcing the release of 0.5.0 RC 1 for testing.
To get started (assuming you have git setup):
git clone g...@github.com:XSCE/xsce.git
cd xsce
git checkout 0.5.0-rc.1
Then look at the docs se
Question: are you using the repository at
downloads.internet-in-a-box.org directly in your installation scripts,
or have you copied those RPMs to a "safe and tested" XSCE repo? The
original intention was for you to copy them. Because if we push
version updates to those RPMS to the downloads.int
usb to an external connector and I’m
guessing that ..231 does the same. It would be nice if there were an rj45
connector on the chassis that could pass through the ethernet from the cubox.
Tim
From: George Hunt
Sent: Saturday, January 04, 2014 10:44 AM
To: Jon Nettleton
Cc: Tim Moody ; XS
http://www.markertek.com/Connectors-Adapters/Data-Connectors-Adapters/RJ45-CAT5-and-CAT6-Connectors/Switchcraft-Corporation/EHRJ45P5E.xhtml
or someplace else to find a cat5e case mountable receptacle.
Tim
From: Tim Moody
Sent: Saturday, January 04, 2014 11:50 AM
To: George Hunt ; Jon Nettleton
it is low. I know that is one of George’s pet
projects.
are there low power states we can put the drive (spin down) and the cubox
(sleep) into?
Tim
From: Jon Nettleton
Sent: Saturday, January 04, 2014 12:14 PM
To: Tim Moody
Cc: George Hunt ; XS Devel ; xsce-devel
Subject: [XSCE] Re: Cubox
My other question is where do we expect the wifi router to be located and is it
powered from AC or 12V?
Tim
From: Tim Moody
Sent: Saturday, January 04, 2014 11:50 AM
To: George Hunt ; Jon Nettleton
Cc: XS Devel ; xsce-devel
Subject: [XSCE] Re: Cubox Solidrun Prototype Packaging
My first
for a drive I am looking at
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=8511357&CatId=139
I assume we want 5400 rpm for less power.
Tim
From: Jon Nettleton
Sent: Saturday, January 04, 2014 12:05 PM
To: Tim Moody
Cc: George Hunt ; XS Devel ; xsce-devel
Sub
rivets look about perfect to me.
On Sat, Jan 4, 2014 at 6:13 PM, Tim Moody wrote:
http://www.markertek.com/Connectors-Adapters/Data-Connectors-Adapters/RJ45-CAT5-and-CAT6-Connectors/Switchcraft-Corporation/EHRJ45P5E.xhtml
or someplace else to find a cat5e case mountable receptacle.
Tim
the rj45 passthrough connectors referenced in the immediately preceding email.
Tim
From: George Hunt
Sent: Saturday, January 04, 2014 8:06 PM
To: xsce-devel
Cc: XS Devel
Subject: Re: [XSCE] Re: Cubox Solidrun Prototype Packaging
On Sat, Jan 4, 2014 at 2:49 PM, Tim Moody wrote:
I
that is no
longer realistic.
Tim
From: George Hunt
Sent: Monday, January 06, 2014 5:04 PM
To: Jon Nettleton
Cc: XS Devel ; Tim Moody ; A Holt ; Curt Thompson
Subject: Re: [XSCE] Re: [Server-devel] a kernel for our solidrun protos?
Jon,
When I compiled the kernel that Rabeeh made available
"appliance mode" should really be called non-gateway as opposed to gateway.
In gateway mode xsce provides dhcp leases as well as routing and name
resolution and none of these in appliance mode.
Tim
-Original Message-
From: James Cameron
Sent: Thursday, January 09, 2014 10:48 PM
To: xs
I set up 3 Village Telco MP02 units for Haiti:
Configuration
•Set wired nic ipv4 on my pc to 10.130.1.99, mask 255.255.255.0
•Connect cable to MP02
•Access configuration page at http://10.130.1.20
•Take Advanced Firmware to update firmware (currently
openwrt-MP02-RC3d-squashfs-sy
I have created a repo server with lots of rpms organized into created repos for
the case where I have no external internet connection. I sent an earlier email
with the list to which I have added the /var/cache/yum from and install.
I can access these with, for example, yum --disablerepo=*
--en
This is a slightly belated announcement of the release of the XSCE School
Server version 5.0. The full release notes are included below. Those who have
been following the project will notice the order of magnitude jump in release
numbers, e.g. 0.5 has become 5.0. This has been done to avo
Hi James,
These are valuable statistics.
Does it matter if the xo has previously connected to the ap and stored
connection info? Could we avoid the scan by pre-populating the connection
info? (I think you did this in tinycore. This would also eliminate the
variable of relying on NN to show
I completely agree that we have evidence that some routers (and android
hotspots) just work and that if you can figure out how to make this reliable
and even how to add this capability to other routers that currently fail
that would be the best solution.
However, as a parallel track we should
A couple of questions on the test environment.
Do you care what channel the ap is on?
Do you care if anything is serving dhcp?
Do you care if the xo can reach the internet?
Tim
-Original Message-
From: James Cameron
Sent: Sunday, February 09, 2014 11:47 PM
To: de...@lists.laptop.org
iwlist on 11.3 does not return Extra:Last Beacon. I tried yum upgrade, but
there was no later package. So I upgraded the monitor xo only to 12.1 and
am re-running.
Tim
-Original Message-
From: James Cameron
Sent: Monday, February 10, 2014 6:53 PM
To: Tim Moody
Cc: de
1 - 100 of 268 matches
Mail list logo