RE: RE SD Does this look right?

2005-06-01 Thread Dan Harling
From: Paul T. Standaert Sent: Tuesday, May 31, 2005 8:17 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: RE SD Does this look right? I never kept real accurate count, but being able to see five confirmed '88 airbag equipped cars out of 1500 in just my own junkyarding

RE SD Does this look right?

2005-06-01 Thread Hicks Residence
You're a little off in your VIN info. The model year of any vehicle manufactured from 1980 on is the 10th digit of the 17 digit VIN, counting from the start of the VIN Some examples are: A=1980,B=81,C=82,D=83,E=84,F=85, G=86, H=87, J=88, K=89, L=90,M= 91. Note there is no i, o ,q or y in this

RE SD Does this look right?

2005-05-31 Thread Moparmat2000
are you sure what you were looking at were 88 models. the dash for the 88 and 89 are identical. dash design didnt change until 1990. 3 easy ways to tell an 88 from an 89. the first is look at the build date in the drivers door jamb on the door itself if its still there or still legible. the 89

RE: RE SD Does this look right?

2005-05-31 Thread Thoms, Shane
Isn't 89 the year they added nose vents too? Shane -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 31, 2005 6:37 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE SD Does this look right? are you sure what

Re: RE SD Does this look right?

2005-05-31 Thread Paul T. Standaert
Actually, when I look at pre-1990 Daytonas the thing that draws me towards them is underhood stuff. You should be able to quickly distingush '88 from '89 by a commonblock or non-commonblock engine. Granted the engines aren't necessarily original but whoever did the swap would get a rude

Re: RE SD Does this look right?

2005-05-31 Thread Moparmat2000
the number is actually 1,859 units made with the airbag in the end of 1988 production. this is chryslers official count. or at least what they told me when i called them to ask this question a few years ago. i have not seen another 88 turbo airbag or N/A airbag car in my travels to any

Re: SD Does this look right?

2005-05-30 Thread Paul T. Standaert
I'll be one to question the figures of 1,xxx '88 Daytonas with an airbag. I would swear that a LOT more than that were made with them. I see them all the time in the junk yards. There were not officially available until '89, but they definitely had them in 1988. No question about it. And

Re: RE Re: SD Does this look right?

2005-05-30 Thread PentastarTurbo
I had an 88 shelby z parts car... we removed the airbag and popped it using a few feet of wire and a 9v battery and that thing flew! Chris Pauluk - Modesto CA. - 1984 T2 Rampage Ramlet _www.cardomain.com/id/pentastarturbo_ (http://www.cardomain.com/id/pentastarturbo) -

RE Re: SD Does this look right?

2005-05-28 Thread Moparmat2000
actually the dodge daytona did have an airbag installed in the steering wheel in 1988. my 1988 shelby Z with a build date of april 1988 has a factory installed airbag wheel, and the stock wiring harness is a 1988 airbag harness. this car was not modded to have this. its a factory harness

Re: RE Re: SD Does this look right?

2005-05-28 Thread GLHSHELBY
In a message dated 5/28/2005 7:29:43 PM Eastern Daylight Time, [EMAIL PROTECTED] writes: the 1987 and 1988 daytona forward engine compartment harness used a 4 wire plug for the pop up headlamp motors, the 89 daytona with same dash and interior used a 2 wire plug for the pop up headlamp

Re: RE Re: SD Does this look right?

2005-05-28 Thread Moparmat2000
that may be so and you were the lucky one to have that many 1988 daytonas with this feature since it was pretty odd for the 1988 model run . however the figure for the amount that were made this way came right from information kept at chryslers archives. of the total of 66,407 daytonas made in

Re: RE Re: SD Does this look right?

2005-05-28 Thread GLHSHELBY
In a message dated 5/28/2005 11:04:54 PM Eastern Daylight Time, [EMAIL PROTECTED] writes: that may be so and you were the lucky one to have that many 1988 daytonas with this feature since it was pretty odd for the 1988 model run . however the figure for the amount that were made this way

SD Does this look right?

2005-05-27 Thread Brian R. Downard Sr.
I came across this on the internet can this be true or is it a miss print? http://vnt.cbr929rr.com/vnt88.html Brian R. Downard Sr. 1987 Dodge Shelby Charger GLH-S #324 http://www.soulserpentmedia.com/DodgeShelby.html

Re: SD Does this look right?

2005-05-27 Thread MoparTurbo
looks fine to me, although that was a typo, but there were VNTs running around in 88, albeit prototypes - Original Message - From: Brian R. Downard Sr. [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 27, 2005 1:27 PM Subject: SD Does this look right? I came across

Re: SD Does this look right?

2005-05-27 Thread Brian R. Downard Sr.
Sr. [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, May 27, 2005 1:02 PM Subject: Re: SD Does this look right? looks fine to me, although that was a typo, but there were VNTs running around in 88, albeit prototypes - Original Message - From: Brian R. Downard Sr. [EMAIL PROTECTED

Re: SD Does this look right?

2005-05-27 Thread Marc Medina
/05 - Original Message - From: Brian R. Downard Sr. [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 27, 2005 10:27 AM Subject: SD Does this look right? I came across this on the internet can this be true or is it a miss print? http://vnt.cbr929rr.com/vnt88.html Brian R

Re: SD Does this look right?

2005-05-27 Thread Mike Fisher
. [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, May 27, 2005 10:27 AM Subject: SD Does this look right? I came across this on the internet can this be true or is it a miss print? http://vnt.cbr929rr.com/vnt88.html Brian R. Downard Sr. 1987 Dodge Shelby Charger GLH-S #324 http

RE: SD Does this look right?

2005-05-27 Thread Mullikin, Stefan P
the Mustang GT-350H (H is for Hertz) Stefan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian R. Downard Sr. Sent: Friday, May 27, 2005 10:28 AM To: [EMAIL PROTECTED] Subject: SD Does this look right? I came across this on the internet can this be true