Watanabe Anderson wrote:
> Tom,
>
>
> For example,
>
> My ppp0 interface always receive the same ip adrress. I have a 16 ip
> avaliables.
>
> My first IP is 61.x.y.72 (at ppp0)
>
> I need to creat a DNAT rule, using the ip 61.x.y.73 and 61.x.y.74, and my
> rules bellow is correct?
>
> #ACT
naks a lot.
Watanabe Anderson.
- Original Message -
From: "Tom Eastep"
To: "Shorewall Users"
Sent: Sunday, June 07, 2009 12:06 AM
Subject: Re: [Shorewall-users] External Aliases Configuration
> ---
Tom Eastep wrote:
> Watanabe Anderson wrote:
>> Hello,
>>
>>
>>
>> I have a question.
>>
>>
>> I'll configure a new Shorewall, but this time, I'll use a DSL modem with
>> PPPoE.
>>
>> 1. The DSL modem is connected on eth0
>> 2. I have 16 publics IPs, and need to use 6 IPs. (eth0:1 ~ eth0:6)
>
> I
Watanabe Anderson wrote:
> Hello,
>
>
>
> I have a question.
>
>
> I'll configure a new Shorewall, but this time, I'll use a DSL modem with
> PPPoE.
>
> 1. The DSL modem is connected on eth0
> 2. I have 16 publics IPs, and need to use 6 IPs. (eth0:1 ~ eth0:6)
I think that you will just conf
Hello,
I have a question.
I'll configure a new Shorewall, but this time, I'll use a DSL modem with
PPPoE.
1. The DSL modem is connected on eth0
2. I have 16 publics IPs, and need to use 6 IPs. (eth0:1 ~ eth0:6)
After connect with PPPoE conenction , my external interface is ppp0.
How I need
