MY experience from having done this is that adding the peroxide to the
water before making CS results in a maximum of around 13 PPM ionic [13 uS
on a PWT meter] and everything after that HUGE shiney silver metal
flakes big and pretty enough to use in a snow scene paperweight.
Eventually
Ode,
Is it a bad thing if the water tastes very metallic? I ask because, the
last batch I made I had going for about 45 mins and I had *no* tindal effect
so I chugged it away until I saw a slight effect about half an our later.
The water was very clear and by the faraday calculator I reckon it
Mostly copper and some gold...perhaps a wee touch of lead or bismuth now
and then, all in amounts far less than you'd injest with every lungful of
air or mouthful of food.
Ode
At 03:09 PM 7/21/2004 -0700, you wrote:
I was just curious, that if you use .999 or .
silver wire, and since it is
, July 21, 2004 2:31 PM
Subject: [silver_list] CSHydrogen peroxide and Colloidal Silver
Hi,
I was told it is not a good idea to add hydrogen peroxide to the steam
distilled water before making the Colloidal Silver because it causes the
resulting product to be 100% ionic as opposed to 85% ionic
I was just curious, that if you use .999 or .
silver wire, and since it is not 100% pure silver,
what other metals are you getting in your water
besides silver? Would that be zinc or copper too?
Hello, David,
Your question leads to another good reason to use
bullion coins instead of
Having made CS that read low in uS and had high TE..but had virtually no
flavor, then making high uS and low TE with strong flavor..
I think its ions we taste even if they're not 'free' ions.
No, strong taste is not bad. Nor is no or little taste. It's more like a
sensual indicator that can
Most likely copper and gold, some possible zinc. But the amount is so
trivial that even if it were mercury or arsenic, 10 ppm CS would still
meet the EPA requirements for drinking water if I remember right.
Marshall
David wrote:
I was just curious, that if you use .999 or .
silver wire,
At 12:26 AM 23/07/04, you wrote:
Your question leads to another good reason to use
bullion coins instead of wire. Coins are marked with
their silver content, of course, but their non-silver content
is assayed too.
Hear, hear! I use Canadian $5 Maples. . for 2 reasons: 1. anything
purer
At 02:39 AM 23/07/04, Marshall wrote:
10 ppm CS would still
meet the EPA requirements for drinking water if I remember right.
Ahhh, Marshall, that lot is not really a good recommendation, friend! :-)
Himagain
--
The Silver List is a moderated forum for discussing Colloidal Silver.
: Wednesday, July 21, 2004 4:31 PM
Subject: CSHydrogen peroxide and Colloidal Silver
Hi,
I was told it is not a good idea to add hydrogen peroxide to the steam
distilled water before making the Colloidal Silver because it causes the
resulting product to be 100% ionic as opposed to 85% ionic
Hi,
I was told it is not a good idea to add hydrogen peroxide to the steam
distilled water before making the Colloidal Silver because it causes the
resulting product to be 100% ionic as opposed to 85% ionic without the
hydrogen peroxide.
Reportedly it won't affect the ionic ratio if the hydrogen
I was just curious, that if you use .999 or .
silver wire, and since it is not 100% pure silver,
what other metals are you getting in your water
besides silver? Would that be zinc or copper too?
David
--- oldgl...@bigcountry.net
oldgl...@bigcountry.net wrote:
Hi,
I was told it is not
.
As Ken (Ode) says, you'll make beautiful silver looking snowflakes in the CS.
Right
Ken?
Best regards,
Trem
- Original Message -
From: oldgl...@bigcountry.net
To: silver-list@eskimo.com
Sent: Wednesday, July 21, 2004 2:31 PM
Subject: [silver_list] CSHydrogen peroxide and Colloidal Silver
Hi Trem,
Yes, I did misunderstand. Sorry, my mistake.
Then you are saying to not add hydrogen peroxide before OR after making
Colloidal Silver.
Thank you,
Jean Baugh
***
Jean,
You misread or misunderstood my earlier reply to you. I said do not add H202
to the
water
Hi Trem,
I went back to see what you said and to see why I mistook your words. I see
now what you meant but in my hurry (too many chores here), it flew over my
head.
Thank you for correcting me. :)
Jean Baugh
Hi Jean,
Do NOT add peroxide BEFORE making CS. If you want
15 matches
Mail list logo