On Wed, 2005-12-21 at 18:32 +0530, Anshuman Rawat wrote:
The actual problem was that I had loose routing enabled while the proxy
did not support loose routing. Disabling loose routing at my end solved
the problem.
In that case, the proxy should have used a different error code than
404, which
Hi all,
I am facing a strange problem with a UA I have been working on. While
making an outgoing call the SIP proxy sends me a SIP/2.0 404 Not Found
response with this UA. With X-Lite UA the call goes through.
I have the INVITE message here for both calls -
My UA -
INVITE
-implementors] SIP/2.0 404 Not Found
Hi all,
I am facing a strange problem with a UA I have been working on. While
making an outgoing call the SIP proxy sends me a SIP/2.0 404 Not Found
response with this UA. With X-Lite UA the call goes through.
I have the INVITE message here for both calls -
My
Subject: [Sip-implementors] SIP/2.0 404 Not Found
Hi all,
I am facing a strange problem with a UA I have been working on. While
making an outgoing call the SIP proxy sends me a SIP/2.0 404 Not Found
response with this UA. With X-Lite UA the call goes through.
I have the INVITE message here
:16 AM
Subject: Re: [Sip-implementors] SIP/2.0 404 Not Found
Hi Shardul,
I am not sure I understand you here. My UA offers codecs 0, 8, 18.
X-Lite offers 0 and 101, and 0 are selected for RTP.
Another thing, I don't think proxy would look at the SDP information. If
the proxy is forwarding
...
Thanks Regards,
Nataraju A.B.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Anshuman
Rawat
Sent: Wednesday, December 21, 2005 2:46 PM
To: [EMAIL PROTECTED]; sip-implementors@cs.columbia.edu
Subject: Re: [Sip-implementors] SIP/2.0 404 Not Found
Hi Shardul
-
From: Jeroen van Bemmel [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 21, 2005 4:09 PM
To: Anshuman Rawat; [EMAIL PROTECTED];
sip-implementors@cs.columbia.edu
Subject: Re: [Sip-implementors] SIP/2.0 404 Not Found
Anshuman,
I believe the difference in behavior comes from the difference
