Seagate Expansion Portable 2TB
USB3 2.5" disk in plastic case, no external power supply.
smartctl requires -d sat, otherwise barfs.
No other change is necessary.
Tested with smartmontools 6.0, but latest version has same problem.
Below are a drive db diff. smartctl output attached.
Volker
In the drive db it needs a "1A" aded to the USB id:
--- /etc/smart_drivedb.h.orig 2014-10-10 00:13:42.000000000 +1300
+++ /etc/smart_drivedb.h 2017-02-13 00:41:39.590382949 +1300
@@ -1 +1,19 @@
/* smart_drivedb.h: Custom drive database. See also
/usr/share/smartmontools/drivedb.h. */
+
+
+/* 13 Feb 2017
+ The following is sufficient to make smartctl no longer require -d sat
+ with a 2TB Seagate Expansion Portable.
+ It's adding the "1a".
+
+ /dev/sdb: Unknown USB bridge [0x0bc2:0x231a (0x707)]
+ Please specify device type with the -d option.
+*/
+/*
+ { "USB: Seagate Expansion Portable; ",
+ "0x0bc2:0x23(00|12|1a|20|21|22)",
+ "", // 12=0x0219, 22=0x0000
+ "",
+ "-d sat"
+ }
+*/
--
Volker Kuhlmann
http://volker.top.geek.nz/ Please do not CC list postings to me.
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.7.10-1.45-desktop] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST2000LM007-1R8174
Serial Number: WD......
LU WWN Device Id: 5 000c50 09dfcd274
Firmware Version: SBK2
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x07f0), ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Feb 18 09:00:23 2017 NZDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 331) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 076 064 006 Pre-fail Always
- 42611119
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 12
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 067 060 045 Pre-fail Always
- 4616302
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 126 (216 239 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 10
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always
- 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 071 053 040 Old_age Always
- 29 (Min/Max 29/47)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 2
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always
- 542
194 Temperature_Celsius 0x0022 029 047 000 Old_age Always
- 29 (0 21 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline
- 192337225449494
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline
- 3916021490
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline
- 78209924
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 119 -
# 2 Short offline Completed without error 00% 90 -
# 3 Extended offline Completed without error 00% 6 -
# 4 Short offline Completed without error 00% 1 -
# 5 Conveyance offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
