[Smartmontools-database] New supported USB device: 0480:a202, Toshiba Canvio 2, 5" 3TB USB3.0

2017-04-30 Thread Joachim Neu
Hi,

My Toshiba Canvio Basics 2.5" 3TB USB3.0 external hard drive (P/N 
HDTB330EK3CA) with USB ID 0x0480:0xa202 is not in this list:

https://www.smartmontools.org/wiki/Supported_USB-Devices

But like the other Canvio Basic drives it works with "-d sat", at least 
under Linux 4.5.1-1-ARCH here.

It'd be glad if someone with an account could add it! Thank you!

Best regards,

Joachim

--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
___
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database


[Smartmontools-database] KINGSTON SUV400S37240G

2017-04-30 Thread Martin Schröder

smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.57-18.3-default] (SUSE RPM)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SUV400S37240G
Serial Number:50026B7773010D65
LU WWN Device Id: 0 550380 44001
Firmware Version: 0C3K87RA
User Capacity:240.057.409.536 bytes [240 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate:Solid State Device
Form Factor:  2.5 inches
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ffe), ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:Sat Apr 22 23:58:48 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(5) seconds.
Offline data collection
capabilities:(0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:(   5) minutes.
Conveyance self-test routine
recommended polling time:(   0) minutes.
SCT capabilities:  (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 48
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate POSR-K   100   100   000-0
  5 Reallocated_Sector_Ct   PO--CK   100   100   010-0
  9 Power_On_Hours  -O--CK   100   100   000-10
 12 Power_Cycle_Count   -O--CK   100   100   000-12
100 Unknown_Attribute   -O--CK   100   100   000-86752
101 Unknown_Attribute   -O--CK   100   100   000-19136
170 Unknown_Attribute   -O--CK   100   100   000-0
171 Unknown_Attribute   -O--CK   100   100   000-0
172 Unknown_Attribute   -O--CK   100   100   000-0
174 Unknown_Attribute   -O--CK   100   100   000-3
175 Program_Fail_Count_Chip -O--CK   100   100   000-0
176 Erase_Fail_Count_Chip   -O--CK   100   100   000-0
177 Wear_Leveling_Count -O--CK   100   100   000-25
178 Used_Rsvd_Blk_Cnt_Chip  -O   100   100   000-0
180 Unused_Rsvd_Blk_Cnt_Tot -O   100   100   000-1305
183 Runtime_Bad_Block   -O--CK   100   100   000-0
187 Reported_Uncorrect  PO--CK   100   100   000-0
194 Temperature_Celsius -O---K   034   100   000-34 (Min/Max 20/38)
195 Hardware_ECC_Recovered  -O--CK   100   100   000-0
196 Reallocated_Event_Count -O--CK   100   100   000-0
197 Current_Pending_Sector  -O--CK   100   100   000-0
199 UDMA_CRC_Error_Count-O--C-   100   100   000-0
201 Unknown_SSD_Attribute   -O--CK   100   100   000-0
204 Soft_ECC_Correction -O--CK   100   100   000-0
231 Temperature_Celsius -O--CK   100   100   000-0
233 Media_Wearout_Indicator -O--CK   100   100   000-161
234 Unknown_Attribute   -O--CK   100   100   000-112
241 Total_LBAs_Written 

[Smartmontools-database] TOSHIBA-MQ01UBB200

2017-04-30 Thread David Marques Neves (DMNss)

Runs with "-d sat", Please add.

Thanks,

-- 

David Marques Neves

.--.
   |o_o |
   |:_/ |
  //   \ \
 (| | )
/'\_   _/`\
\___)=(___/

Linux User no. 97619
(http://counter.li.org/)

smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win10(64)] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01UBB... (USB 3.0)
Device Model: TOSHIBA MQ01UBB200
Serial Number:34MATMZ5T
LU WWN Device Id: 0 00 0
Firmware Version: AY000U
User Capacity:2.000.398.934.016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate:5400 rpm
Form Factor:  2.5 inches
Device is:In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:Sat Apr 29 19:34:06 2017 HB
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(  120) seconds.
Offline data collection
capabilities:(0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off 
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:( 474) minutes.
SCT capabilities:  (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate PO-R--   100   100   050-0
  2 Throughput_Performance  P-S---   100   100   050-0
  3 Spin_Up_TimePOS--K   100   100   001-4927
  4 Start_Stop_Count-O--CK   100   100   000-1736
  5 Reallocated_Sector_Ct   PO--CK   100   100   050-0
  7 Seek_Error_Rate PO-R--   100   100   050-0
  8 Seek_Time_Performance   P-S---   100   100   050-0
  9 Power_On_Hours  -O--CK   099   099   000-798
 10 Spin_Retry_CountPO--CK   134   100   030-0
 12 Power_Cycle_Count   -O--CK   100   100   000-515
191 G-Sense_Error_Rate  -O--CK   100   100   000-51
192 Power-Off_Retract_Count -O--CK   100   100   000-157
193 Load_Cycle_Count-O--CK   100   100   000-3266
194 Temperature_Celsius -O---K   100   100   000-38 (Min/Max 19/66)
196 Reallocated_Event_Count -O--CK   100   100   000-0
197 Current_Pending_Sector  -O--CK   100   100   000-0
198 Offline_Uncorrectable   CK   100   100   000-0
199 UDMA_CRC_Error_Count-O--CK   200   200   000-0
220 Disk_Shift  -O   100   100   000-0
222 Loaded_Hours-O--CK   100   100   000-136
223 Load_Retry_Count-O--CK   100   100   000-0
224 Load_Friction   -O---K   100   100   000-0
226 Load-in_Time-OS--K   100   100   000-182
240 Head_Flying_Hours   P-   100   100   001-0
 

[Smartmontools-database] Toshiba THNSNJ128GMCU

2017-04-30 Thread David "Pyrion" Taylor

smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA THNSNJ128GMCU
Serial Number:74RS105FTOGY
LU WWN Device Id: 5 00080d 9101c836c
Firmware Version: JUXA0102
User Capacity:128,035,676,160 bytes [128 GB]
Sector Size:  512 bytes logical/physical
Rotation Rate:Solid State Device
Form Factor:  < 1.8 inches
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:Fri Apr 28 22:40:29 2017 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(  120) seconds.
Offline data collection
capabilities:(0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off 
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:(   5) minutes.
SCT capabilities:  (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate -O-R--   100   100   000-0
  2 Throughput_Performance  P-S---   100   100   050-0
  3 Spin_Up_TimePOS---   100   100   050-0
  5 Reallocated_Sector_Ct   PO--C-   100   100   050-0
  7 Unknown_SSD_Attribute   PO-R--   100   100   050-0
  8 Unknown_SSD_Attribute   P-S---   100   100   050-0
  9 Power_On_Hours  -O--C-   100   100   000-17960
 10 Unknown_SSD_Attribute   PO--C-   100   100   050-0
 12 Power_Cycle_Count   -O--C-   100   100   000-180
167 Unknown_Attribute   -O---K   100   100   000-0
168 Unknown_Attribute   -O--C-   100   100   000-0
169 Unknown_Attribute   PO--C-   100   100   010-100
170 Unknown_Attribute   PO--C-   100   100   010-0
173 Unknown_Attribute   -O--C-   189   189   000-0
175 Program_Fail_Count_Chip PO--C-   100   100   010-0
192 Power-Off_Retract_Count -O--C-   100   100   000-8
194 Temperature_Celsius PO---K   054   031   020-46 (Min/Max 11/69)
197 Current_Pending_Sector  -O--C-   100   100   000-0
240 Unknown_SSD_Attribute   PO--C-   100   100   050-0
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory Version 1
SMART   Log Directory Version 1 [multi-sector log support]
AddressAccess  R/W   Size  Description
0x00   GPL,SL  R/O  1  Log Directory
0x01   SL  R/O  1  Summary SMART error log
0x02   SL  R/O 51  Comprehensive SMART error log
0x

[Smartmontools-database] Crucial_CT750MX300SSD1

2017-04-30 Thread Photo Shoots
smartctl 6.4 2014-09-29 r3990 [x86_64-linux-4.9.24-pavilion-g7] (local 
build)

Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: Crucial_CT750MX300SSD1
Firmware Version: M0CR011
User Capacity:750 156 374 016 bytes [750 GB]
Sector Size:  512 bytes logical/physical
Rotation Rate:Solid State Device
Form Factor:  2.5 inches
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 (unknown minor revision code: 0x006d)
SATA Version is:  SATA >3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:Wed Apr 26 17:42:20 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 127 (intermediate level with standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0)The previous self-test 
routine completed

without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1678) seconds.
Offline data collection
capabilities:  (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003)Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time:  (   2) minutes.
Extended self-test routine
recommended polling time:  (   8) minutes.
Conveyance self-test routine
recommended polling time:  (   3) minutes.
SCT capabilities:(0x0035)SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate POSR-K   100   100   000-0
  5 Reallocated_Sector_Ct   -O--CK   100   100   010-0
  9 Power_On_Hours  -O--CK   100   100   000-1600
 12 Power_Cycle_Count   -O--CK   100   100   000-233
171 Unknown_Attribute   -O--CK   100   100   000-0
172 Unknown_Attribute   -O--CK   100   100   000-0
173 Unknown_Attribute   -O--CK   099   099   000-10
174 Unknown_Attribute   -O--CK   100   100   000-14
183 Runtime_Bad_Block   -O--CK   100   100   000-0
184 End-to-End_Error-O--CK   100   100   000-0
187 Reported_Uncorrect  -O--CK   100   100   000-0
194 Temperature_Celsius -O---K   064   043   000-36 (Min/Max 
14/57)

196 Reallocated_Event_Count -O--CK   100   100   000-0
197 Current_Pending_Sector  -O--CK   100   100   000-0
198 Offline_Uncorrectable   CK   100   100   000-0
199 UDMA_CRC_Error_Count-O--CK   100   100   000-0
202 Unknown_SSD_Attribute   CK   099   099   001-1
206 Unknown_SSD_Attribute   -OSR--   100   100   000-0
246 Unknown_Attribute   -O--CK   100   100   000- 7497812970
247 Unknown_Attribute   -O--CK   100   100   000- 234308391
248 Unknown_Attribute   -O--CK   100   100   000- 177414554
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK   000   000   000-3579
210 Unknown_Attribute   -O--CK   100   100   000-0
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory Version 1
SMART   Log Directory Version 1 [multi-sector log support]
AddressAccess  R/W   Size  Description
0x00   GPL,SL  R/O  1  Log Directory
0x01   SL  R/O  1  Summary SMART error log
0x02   SL  R/O 51  Comprehensive SMART error log
0x03   GPL R/O  16383  Ext. Comprehensive SMART error log
0x04   GPL,SL  R/O  8  Dev

[Smartmontools-database] Seagate BarraCuda ST3000DM008-2DM166

2017-04-30 Thread Kyle Devir
Seagate BarraCuda ST3000DM008-2DM166
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.10.11-1-ck] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: ST3000DM008-2DM166
Serial Number:Z50426Q9
LU WWN Device Id: 5 000c50 0934b64d7
Firmware Version: CC26
User Capacity:3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate:7200 rpm
Form Factor:  3.5 inches
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:Thu Apr 20 16:02:53 2017 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(   97) seconds.
Offline data collection
capabilities:(0x73) SMART execute Offline immediate.
Auto Offline data collection on/off 
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   1) minutes.
Extended self-test routine
recommended polling time:( 319) minutes.
Conveyance self-test routine
recommended polling time:(   2) minutes.
SCT capabilities:  (0x1085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate POSR--   111   100   006-38959616
  3 Spin_Up_TimePO   097   097   000-0
  4 Start_Stop_Count-O--CK   100   100   020-4
  5 Reallocated_Sector_Ct   PO--CK   100   100   010-0
  7 Seek_Error_Rate POSR--   100   253   030-65432
  9 Power_On_Hours  -O--CK   100   100   000-4
 10 Spin_Retry_CountPO--C-   100   100   097-0
 12 Power_Cycle_Count   -O--CK   100   100   020-4
183 Runtime_Bad_Block   -O--CK   100   100   000-0
184 End-to-End_Error-O--CK   100   100   099-0
187 Reported_Uncorrect  -O--CK   100   100   000-0
188 Command_Timeout -O--CK   100   100   000-0
189 High_Fly_Writes -O-RCK   100   100   000-0
190 Airflow_Temperature_Cel -O---K   070   052   045-30 (Min/Max 23/30)
191 G-Sense_Error_Rate  -O--CK   100   100   000-0
192 Power-Off_Retract_Count -O--CK   100   100   000-4
193 Load_Cycle_Count-O--CK   100   100   000-28
194 Temperature_Celsius -O---K   030   048   000-30 (0 23 0 0 0)
197 Current_Pending_Sector  -O--C-   100   100   000-0
198 Offline_Uncorrectable   C-   100   100   000-0
199 UDMA_CRC_Error_Count-OSRCK   200   200   000-0
240 Head_Flying_Hours   --   100   253   000-3 (196 234 0)
241 Total_LBAs_Written  --   100   253   000-1571894536
242 Total_LBAs_Read --   100   253   000-4338468
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory