SanDisk's pSSD-P2 PATA SSD supports SMART.
This sample is SanDisk part number 54-90-12947-016G.
Two files are attached:
output of smartctl --identify
output of smartctl -x
SanDisk_pSSD-P2_16GB_--identify.txt
SanDisk_pSSD-P2_16GB_-x.txt
smartctl 6.4 2014-10-07 r4002 [i686-linux-4.0.0-1-x86-finnix] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== ATA IDENTIFY DATA ===
Word Bit Value Description
0 - 0x0040 General configuration
0 6 1 Not removable controller and/or device [OBS-6]
1 - 0x3fff Cylinders [OBS-6]
2 - 0xc837 Specific configuration (0x37c8/738c/8c73/c837)
3 - 0x0010 Heads [OBS-6]
6 - 0x003f Sectors per track [OBS-6]
7-8 - . Reserved for CFA (Sectors per card)
7-8 . 0x01dd:40b0
10-19 - . Serial number (String)
10-13 . 0x2020:2020:2044:4e5a " DNZ"
14-17 . 0x3131:3035:3039:3134 "11050914"
18-19 . 0x3332:3536 "3256"
23-26 - . Firmware revision (String)
23-26 . 0x5353:4420:352e:3230 "SSD 5.20"
27-46 - . Model number (String)
27-30 . 0x5361:6e44:6973:6b20 "SanDisk "
31-34 . 0x7053:5344:2d50:3220 "pSSD-P2 "
35-38 . 0x3136:4742:2020:2020 "16GB "
39-42 . 0x2020:2020:2020:2020 " "
43-46 . 0x2020:2020:2020:2020 " "
47 - 0x8001 READ/WRITE MULTIPLE support
47 15:8 0x80 Must be set to 0x80
47 7:0 0x01 Maximum sectors per DRQ on READ/WRITE MULTIPLE
49 - 0x2300 Capabilities
49 13 1 Standard standby timer values supported
49 9 1 LBA supported
49 8 1 DMA supported
50 - 0x4000 Capabilities
50 15:14 0x1 Must be set to 0x1
51 - 0x0200 PIO data transfer mode [OBS-5]
53 - 0x0007 Field validity / Free-fall Control
53 2 1 Word 88 (Ultra DMA modes) is valid
53 1 1 Words 64-70 (PIO modes) are valid
53 0 1 Words 54-58 (CHS) are valid [OBS-6]
54 - 0x3fff Current cylinders [OBS-6]
55 - 0x0010 Current heads [OBS-6]
56 - 0x003f Current sectors per track [OBS-6]
57-58 - . Current capacity in sectors (DWord) [OBS-6]
57-58 . 0xfc10:00fb (16514064)
60-61 - . User addressable sectors for 28-bit commands (DWord)
60-61 . 0x40b0:01dd (31277232)
63 - 0x0007 Multiword DMA modes
63 2 1 Multiword DMA mode 2 and below supported
63 1 1 Multiword DMA mode 1 and below supported
63 0 1 Multiword DMA mode 0 supported
64 - 0x0003 PIO modes
64 1 1 PIO mode 4 supported
64 0 1 PIO mode 3 supported
65 - 0x0078 Minimum Multiword DMA cycle time per word in ns
66 - 0x0078 Recommended Multiword DMA cycle time in ns
67 - 0x0078 Minimum PIO cycle time without flow control in ns
68 - 0x0078 Minimum PIO cycle time with IORDY flow control in ns
79 - 0x0040 Serial ATA features enabled
79 6 1 Software Settings Preservation enabled
80 - 0x01f0 Major version number
80 8 1 ATA8-ACS supported
80 7 1 ATA/ATAPI-7 supported
80 6 1 ATA/ATAPI-6 supported
80 5 1 ATA/ATAPI-5 supported
80 4 1 ATA/ATAPI-4 supported [OBS-8]
81 - 0x0028 Minor version number
82 - 0x746b Commands and feature sets supported
82 14 1 NOP supported
82 13 1 READ BUFFER supported
82 12 1 WRITE BUFFER supported
82 10 1 HPA feature set supported [OBS-ACS-3]
82 6 1 Read look-ahead supported
82 5 1 Volatile write cache supported
82 3 1 Power Management feature set supported
82 1 1 Security feature set supported
82 0 1 SMART feature set supported
83 - 0x7401 Commands and feature sets supported
83 15:14 0x1 Must be set to 0x1
83 13 1 FLUSH CACHE EXT supported
83 12 1 FLUSH CACHE supported
83 10 1 48-bit Address feature set supported
83 0 1 DOWNLOAD MICROCODE supported
84 - 0x4102 Commands and feature sets supported
84 15:14 0x1 Must be set to 0x1
84 8 1 64-bit World Wide Name supported
84 1 1 SMART self-test supported
85 - 0x7429 Commands and feature sets supported or enabled
85 14 1 NOP supported
85 13 1 READ BUFFER supported
85 12 1 WRITE BUFFER supported
85 10 1 HPA feature set supported [OBS-ACS-3]
85 5 1 Write cache enabled
85 3 1 Power Management feature set supported
85 0 1 SMART feature set enabled
86 - 0xb401 Commands and feature sets supported or enabled
86 15 1 Words 119-120 are valid
86 13 1 FLUSH CACHE EXT supported
86 12 1 FLUSH CACHE supported
86 10 1 48-bit Address features set supported
86 0 1 DOWNLOAD MICROCODE supported
87 - 0x4102 Commands and feature sets supported or enabled
87 15:14 0x1 Must be set to 0x1
87 8 1 64-bit World Wide Name supported
87 1 1 SMART self-test supported
88 - 0x107f Ultra DMA modes
88 12 1 Ultra DMA mode 4 selected
88 6 1 Ultra DMA mode 6 and below supported
88 5 1 Ultra DMA mode 5 and below supported
88 4 1 Ultra DMA mode 4 and below supported
88 3 1 Ultra DMA mode 3 and below supported
88 2 1 Ultra DMA mode 2 and below supported
88 1 1 Ultra DMA mode 1 and below supported
88 0 1 Ultra DMA mode 0 supported
92 - 0xfffe Master password revision code
93 - 0x6001 Hardware reset result (PATA)
93 15:14 0x1 Must be set to 0x1
93 13 1 Device detected CBLID- above(1)/below(0) ViHB
93 0 1 Must be set to 1
100-103 - . User addressable sectors for 48-bit commands (QWord)
100-103 . 0x40b0:01dd:0000:0000 (31277232)
108-111 - . 64-bit World Wide Name
108-111 . 0x5001:b441:0c95:c9bb
119 - 0x4000 Commands and feature sets supported
119 15:14 0x1 Must be set to 0x1
120 - 0x4000 Commands and feature sets supported or enabled
120 15:14 0x1 Must be set to 0x1
128 - 0x0001 Security status
128 0 1 Security supported
168 - 0x0004 Form factor
168 3:0 0x4 Nominal form factor: -, 5.25, 3.5, 2.5, 1.8, <1.8
217 - 0x0001 Nominal media rotation rate
222 - 0x0001 Transport major version number
222 0 1 ATA8-APT | ATA8-AST
255 - 0x30a5 Integrity word
255 15:8 0x30 Checksum
255 7:0 0xa5 Signature
smartctl 6.4 2014-10-07 r4002 [i686-linux-4.0.0-1-x86-finnix] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SanDisk pSSD-P2 16GB
Serial Number: DNZ110509143256
LU WWN Device Id: 5 001b44 10c95c9bb
Firmware Version: SSD 5.20
User Capacity: 16,013,942,784 bytes [16.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
Local Time is: Sun Dec 11 05:21:36 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0000) Automatic saving of SMART data
is not implemented.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 0) minutes.
Extended self-test routine
recommended polling time: ( 0) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
232 Available_Reservd_Space ------ 100 100 005 - 0
199 UDMA_CRC_Error_Count ------ 000 000 000 - 0
12 Power_Cycle_Count ------ 004 004 000 - 0
171 Unknown_Attribute ------ 000 000 000 - 0
172 Unknown_Attribute ------ 000 000 000 - 0
174 Unknown_Attribute ------ 000 000 000 - 0
187 Reported_Uncorrect ------ 000 000 000 - 0
241 Total_LBAs_Written ------ 000 000 000 - 0
242 Total_LBAs_Read ------ 000 000 000 - 2760
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: Success
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not
implemented
Read GP Log Directory failed
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
Read SMART Self-test Log failed: Success
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
