Hello, smartmontools developers! I have a drive (InnoDisk mSATA 3SE) that isn't on the list and I would like to contribute its info to the database. Test functions seems to be unsupported, but I included a log from iSMART tool (made by InnoDisk) that shows some parameters that might be useful for you.
Thank you! Regards, Pavel
smartctl 6.5 2016-05-07 r4318 [i386-pc-nto-qnx6.5.0] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: InnoDisk Corp. - mSATA 3SE
Serial Number: 20151023AA1147000059
Firmware Version: S130710
User Capacity: 1,011,032,064 bytes [1.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Jan 11 21:57:48 2017 STD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Unknown SCT Status format version 0, should be 2 or 3.
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not
supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
2 Throughput_Performance ------ 000 000 000 - 0
3 Spin_Up_Time ------ 000 000 000 - 0
5 Reallocated_Sector_Ct ------ 000 000 000 - 0
7 Unknown_SSD_Attribute ------ 000 000 000 - 0
8 Unknown_SSD_Attribute ------ 000 000 000 - 0
9 Power_On_Hours ------ 000 000 000 - 33
10 Unknown_SSD_Attribute ------ 000 000 000 - 0
12 Power_Cycle_Count ------ 000 000 000 - 45
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
168 Unknown_Attribute ------ 000 000 000 - 0
169 Unknown_Attribute ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 0
175 Program_Fail_Count_Chip ------ 100 000 000 - 0
192 Power-Off_Retract_Count ------ 000 000 000 - 0
1 Raw_Read_Error_Rate ------ 000 000 000 - 2199023255552
197 Current_Pending_Sector ------ 000 000 000 - 0
240 Unknown_SSD_Attribute ------ 000 000 000 - 0
170 Unknown_Attribute PO---- 100 100 --- - 327680
173 Unknown_Attribute -O--C- 100 100 --- - 1245186
229 Unknown_Attribute -O---- 100 100 --- - 23597197349784
236 Unknown_Attribute -O---- 100 100 --- - 0
235 Unknown_Attribute -O---- 100 000 --- - 0
176 Erase_Fail_Count_Chip ------ 100 000 --- - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not
implemented
Read GP Log Directory failed
SMART Log Directory Version 0
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
Unknown SCT Status format version 0, should be 2 or 3.
Unknown SCT Status format version 0, should be 2 or 3.
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not
implemented
Read SATA Phy Event Counters failed
iSMART_export.log
Description: Binary data
------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi
_______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
