Changeset 4327 introduces support for HGST Ultrastar 7K6000.
However my device doesn't match the regex in drivedb.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-83-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUS726040AL5210
Revision: A907
Compliance: SPC-4
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca2443c4f4c
Serial number: N8H256PZ
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Sun Jul 16 17:15:07 2017 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 37 C
Drive Trip Temperature: 85 C
Manufactured in week 11 of year 2017
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 9
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 73
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 427618201501696
Error counter log:
Errors Corrected by Total Correction Gigabytes
Total
ECC rereads/ errors algorithm processed
uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes]
errors
read: 0 0 0 0 1897 224.386
0
write: 0 0 0 0 40062 550.171
0
verify: 0 0 0 0 1968 0.000
0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err
[SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 795 -
[- - -]
Long (extended) Self Test duration: 34237 seconds [570.6 minutes]
Background scan results log
Status: waiting until BMS interval timer expires
Accumulated power on time, hours:minutes 795:22 [47722 minutes]
Number of background scans performed: 7, scan progress: 0.00%
Number of background medium scans performed: 7
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: expander device
attached reason: loss of dword synchronization
reason: unknown
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=1
SAS address = 0x5000cca2443c4f4d
attached SAS address = 0x5003048017fc203f
attached phy identifier = 5
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2443c4f4e
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database