[Smartmontools-database] Device Model: TOSHIBA DT01ABA300V
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ABA300V Firmware Version: MZ6OACA0 User Capacity:3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate:5940 rpm Form Factor: 3.5 inches Device is:Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is:Sat Jun 11 03:04:43 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85)Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26282) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:(0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:(0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 438) minutes. SCT capabilities:(0x003d)SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGSVALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016-0 2 Throughput_Performance P-S--- 144 144 054-83 3 Spin_Up_TimePOS--- 217 217 024-265 (Average 240) 4 Start_Stop_Count-O--C- 100 100 000-25 5 Reallocated_Sector_Ct PO--CK 100 100 005-0 7 Seek_Error_Rate PO-R-- 100 100 067-0 8 Seek_Time_Performance P-S--- 138 138 020-33 9 Power_On_Hours -O--C- 100 100 000-357 10 Spin_Retry_CountPO--C- 100 100 060-0 12 Power_Cycle_Count -O--CK 100 100 000-19 192 Power-Off_Retract_Count -O--CK 100 100 000-25 193 Load_Cycle_Count-O--C- 100 100 000-25 194 Temperature_Celsius -O 214 214 000-28 (Min/Max 21/33) 196 Reallocated_Event_Count -O--CK 100 100 000-0 197 Current_Pending_Sector -O---K 100 100 000-0 198 Offline_Uncorrectable ---R-- 100 100 000-0 199 UDMA_CRC_Error_Count-O-R-- 200 200 000-0 ||_ K auto-keep |__ C event count ___ R error rate ||| S speed/performance ||_ O updated online |__ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] AddressAccess R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming per
[Smartmontools-database] Device Model: TOSHIBA DT01ABA300V
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ABA300V Firmware Version: MZ6OACA0 User Capacity:3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate:5940 rpm Form Factor: 3.5 inches Device is:Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is:Sat Jun 11 03:04:43 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85)Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26282) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:(0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:(0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 438) minutes. SCT capabilities:(0x003d)SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGSVALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016-0 2 Throughput_Performance P-S--- 144 144 054-83 3 Spin_Up_TimePOS--- 217 217 024-265 (Average 240) 4 Start_Stop_Count-O--C- 100 100 000-25 5 Reallocated_Sector_Ct PO--CK 100 100 005-0 7 Seek_Error_Rate PO-R-- 100 100 067-0 8 Seek_Time_Performance P-S--- 138 138 020-33 9 Power_On_Hours -O--C- 100 100 000-357 10 Spin_Retry_CountPO--C- 100 100 060-0 12 Power_Cycle_Count -O--CK 100 100 000-19 192 Power-Off_Retract_Count -O--CK 100 100 000-25 193 Load_Cycle_Count-O--C- 100 100 000-25 194 Temperature_Celsius -O 214 214 000-28 (Min/Max 21/33) 196 Reallocated_Event_Count -O--CK 100 100 000-0 197 Current_Pending_Sector -O---K 100 100 000-0 198 Offline_Uncorrectable ---R-- 100 100 000-0 199 UDMA_CRC_Error_Count-O-R-- 200 200 000-0 ||_ K auto-keep |__ C event count ___ R error rate ||| S speed/performance ||_ O updated online |__ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] AddressAccess R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error lo
