[Smartmontools-database] SSD device not in database

2016-11-23 Thread Aurelien Dellieux
Hi,

please find a smartctl file attached describing a device not already
present in smartctl database.
it is a Sandisk SSD, model SD8SNAT128G1002, found in an ASUS GL752VW gaming
notebook.

greetings

A.Dellieux
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD8SNAT128G1002
Firmware Version: Z2317002
User Capacity:128 035 676 160 bytes [128 GB]
Sector Size:  512 bytes logical/physical
Rotation Rate:Solid State Device
Form Factor:  M.2
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:Sun Nov 20 14:55:05 2016 PM
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(  120) seconds.
Offline data collection
capabilities:(0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities:(0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:(  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   000-0
  9 Power_On_Hours  -O--CK   011   100   000-11
 12 Power_Cycle_Count   -O--CK   100   100   000-572
166 Unknown_Attribute   -O--CK   100   100   000-3
167 Unknown_Attribute   -O--CK   100   100   000-0
168 Unknown_Attribute   -O--CK   100   100   000-44
169 Unknown_Attribute   -O--CK   100   100   000-116
170 Unknown_Attribute   -O--CK   100   100   000-0
171 Unknown_Attribute   -O--CK   100   100   000-0
172 Unknown_Attribute   -O--CK   100   100   000-0
173 Unknown_Attribute   -O--CK   100   100   ----20
174 Unknown_Attribute   -O--CK   100   100   000-235
187 Reported_Uncorrect  -O--CK   100   100   000-0
194 Temperature_Celsius -O---K   072   100   000-28 (Min/Max 0/45)
199 UDMA_CRC_Error_Count-O--CK   100   100   000-19
230 Unknown_SSD_Attribute   -O--CK   100   100   000-77
232 Available_Reservd_Space PO--CK   100   100   004-100
233 Media_Wearout_Indicator -O--CK   100   100   000-1459
241 Total_LBAs_Written  CK   253   253   000-583
242 Total_LBAs_Read CK   253   253   000-714
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory Version 1
SMART   Log Directory Version 1 [multi-sector log support]
AddressAccess  R/W   Size  Description
0x00   GPL,SL  R/O  1  Log Directory
0x01   SL  R/O  1  Summary SMART error log
0x02   SL  R/O  1  Comprehensive SMART error log
0x03   GPL R/O  1  Ext. Comprehens

[Smartmontools-database] SSD device not in database

2016-11-23 Thread Aurelien Dellieux
Hello,

Please find a log file for a SSD device which is not found in the database.

Greetings
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SSD PM871 2.5 7mm 256GB
Firmware Version: EMT02D0Q
User Capacity:256 060 514 304 bytes [256 GB]
Sector Size:  512 bytes logical/physical
Rotation Rate:Solid State Device
Form Factor:  2.5 inches
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:Wed Nov 23 08:59:11 2016 PM
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(0) seconds.
Offline data collection
capabilities:(0x53) SMART execute Offline immediate.
Auto Offline data collection on/off 
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:(0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:( 133) minutes.
SCT capabilities:  (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010-0
 12 Power_Cycle_Count   PO--CK   099   099   000-473
175 Program_Fail_Count_Chip PO--CK   100   100   010-0
176 Erase_Fail_Count_Chip   PO--CK   100   100   010-0
177 Wear_Leveling_Count PO--C-   098   098   005-23
178 Used_Rsvd_Blk_Cnt_Chip  PO--C-   100   100   010-0
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010-0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C-   100   100   010-771
181 Program_Fail_Cnt_Total  PO--CK   100   100   010-0
182 Erase_Fail_Count_Total  PO--CK   100   100   010-0
187 Reported_Uncorrect  PO--CK   100   100   000-0
195 Hardware_ECC_Recovered  PO-RC-   200   200   000-0
241 Total_LBAs_Written  PO--CK   099   099   000-5364362874
242 Total_LBAs_Read PO--CK   099   099   000-6163054419
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory Version 1
SMART   Log Directory Version 1 [multi-sector log support]
AddressAccess  R/W   Size  Description
0x00   GPL,SL  R/O  1  Log Directory
0x01   SL  R/O  1  Summary SMART error log
0x02   SL  R/O  1  Comprehensive SMART error log
0x03   GPL R/O  1  Ext. Comprehensive SMART error log
0x06   SL  R/O  1  SMART self-test log
0x07   GPL R/O  1  Extended self-test log
0x09   SL  R/W  1  Selective self-test log
0x10   GPL R/O  1  SATA NCQ Queued Error log
0x11   GPL 

[Smartmontools-database] SSD device not in database

2016-11-23 Thread Aurelien Dellieux
Hi,

please find a smartctl file attached describing a device not already
present in smartctl database.
it is a Sandisk SSD, model SD8SNAT128G1002, found in an ASUS GL752VW gaming
notebook.

greetings

A.Dellieux
smartctl 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win8] (sf-6.4-1)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD8SNAT128G1002
Firmware Version: Z2317002
User Capacity:128 035 676 160 bytes [128 GB]
Sector Size:  512 bytes logical/physical
Rotation Rate:Solid State Device
Form Factor:  M.2
Device is:Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:Sun Nov 20 14:55:05 2016 PM
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:  (   0) The previous self-test routine completed
without error or no self-test has ever 
been run.
Total time to complete Offline 
data collection:(  120) seconds.
Offline data collection
capabilities:(0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities:(0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability:(0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine 
recommended polling time:(   2) minutes.
Extended self-test routine
recommended polling time:(  10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME  FLAGSVALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   -O--CK   100   100   000-0
  9 Power_On_Hours  -O--CK   011   100   000-11
 12 Power_Cycle_Count   -O--CK   100   100   000-572
166 Unknown_Attribute   -O--CK   100   100   000-3
167 Unknown_Attribute   -O--CK   100   100   000-0
168 Unknown_Attribute   -O--CK   100   100   000-44
169 Unknown_Attribute   -O--CK   100   100   000-116
170 Unknown_Attribute   -O--CK   100   100   000-0
171 Unknown_Attribute   -O--CK   100   100   000-0
172 Unknown_Attribute   -O--CK   100   100   000-0
173 Unknown_Attribute   -O--CK   100   100   ----20
174 Unknown_Attribute   -O--CK   100   100   000-235
187 Reported_Uncorrect  -O--CK   100   100   000-0
194 Temperature_Celsius -O---K   072   100   000-28 (Min/Max 0/45)
199 UDMA_CRC_Error_Count-O--CK   100   100   000-19
230 Unknown_SSD_Attribute   -O--CK   100   100   000-77
232 Available_Reservd_Space PO--CK   100   100   004-100
233 Media_Wearout_Indicator -O--CK   100   100   000-1459
241 Total_LBAs_Written  CK   253   253   000-583
242 Total_LBAs_Read CK   253   253   000-714
||_ K auto-keep
|__ C event count
___ R error rate
||| S speed/performance
||_ O updated online
|__ P prefailure warning

General Purpose Log Directory Version 1
SMART   Log Directory Version 1 [multi-sector log support]
AddressAccess  R/W   Size  Description
0x00   GPL,SL  R/O  1  Log Directory
0x01   SL  R/O  1  Summary SMART error log
0x02   SL  R/O  1  Comprehensive SMART error log
0x03   GPL R/O  1  Ext. Comprehens