[RCSE] Common trim mode on JR 9303

2008-07-22 Thread John Kappus
Common trim mode on 9303 ? I have a question on the 9303 regarding the common trim mode when using flight modes. In the device select, I set trim mode to common, but I see in the monitor screen that common only

Re: [RCSE] Common trim mode on JR 9303

2008-07-22 Thread Joe Rodriguez
John, Buy some new servos... that will be a start - Original Message - From: John Kappusmailto:[EMAIL PROTECTED] To: soaring@airage.commailto:soaring@airage.com Sent: Tuesday, July 22, 2008 2:19 PM Subject: [RCSE] Common trim mode on JR 9303 Common trim mode on 9303

RE: [RCSE] Common trim mode on JR 9303

2008-07-22 Thread Lex Mierop
Or trim the elevator via the sub trim menu. That will cause the change to affect all flight modes From: Joe Rodriguez [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 22, 2008 7:01 PM To: soaring@airage.com Subject: Re: [RCSE] Common trim mode on JR 9303

Re: [RCSE] Common trim mode on JR 9303

2008-07-22 Thread Mike Lachowski
Besides getting a better servo or linkage, you could use some other knob and a mix into the elevator as your drift compensator. Or don't use any flight modes and do your own mixes if you have minimal changes between flight modes. John Kappus wrote: Common trim mode on 9303 ?