Well I got the Hoopes wire harness to fit down inside the fuse on the Supra
with the ballast tube in place. To achieve this I had to do several things
to make it work.
1. Remove the locking tab that holds the two wiring harness connectors
together. Use tape to hold them together before
(not
end of fuse) does your slot start?
T
- Original Message -
From: Walt W5SWA [EMAIL PROTECTED]
To: soaring@airage.com
Sent: Thursday, January 05, 2006 12:34 PM
Subject: [RCSE] Supra and Hoopes wire harness
Well I got the Hoopes wire harness to fit down inside the fuse
For those of you who would like to incorporate a high perfomance plug-and-play
PnP - automated connection) connector system that will fit this and other
extremely tight constraints, I have a specialized micro-D that will fit. They
are not cheap though...
Quoting Walt W5SWA [EMAIL PROTECTED]:
Okay. Do you have a link or is it private?
At 12:15 PM 1/5/2006, [EMAIL PROTECTED] wrote:
For those of you who would like to incorporate a high perfomance
plug-and-play
PnP - automated connection) connector system that will fit this and other
extremely tight constraints, I have a specialized
There is no link Mr. Meyer, however if folks are interested I can send
pics comparing it to the accepted standard (at least one of my standards
- DB-15HD/30uM gold).
regards
S Meyer wrote:
Okay. Do you have a link or is it private?
At 12:15 PM 1/5/2006, [EMAIL PROTECTED] wrote:
For those
5 matches
Mail list logo