Hello! Please forgive me my lousy English. I was installed OpenBSD 5.6 on SPARC Enterprise M3000.
During installation: The following message was displayed on the console. Get/VeMar 29 01:06:17 sbcondb1 fmd: SOURCE: sde, REV: 1.16, CSN: PX61035173 EVENT-ID: dfc125c9-b6d9-45ab-9f0c-5a9901b2c3d8 Refer to http://www.fujitsu.com/sparcenterprise/msg/SCF-8003-HA for detailed information. and Automatic power off. I was reboot a system. The following message was displayed on the console. XSCF> poweron -a DomainIDs to power on:00 Continue? [y|n] :y 00 :Not powering on :Poweron canceled due to missing component. I think that SPARC Enterprise M3000 is broken and will have to be repaired. Use with Caution!! ------------------------------------------------------------------------------------- Last login: Fri Mar 13 23:26:49 on ttys000 macbook-black:~ naruaki$ cu -l /dev/tty.usbserial-FTXUYJS9 Connected. ............finish DDR Real size: 256 MB DDR: 224 MB ## Booting image at ff800000 ... Image Name: XSCF kernel 01090003 2.6.11.12-s Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1457048 Bytes = 1.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff980000 ... Image Name: XSCF rootfs 01090003 ,2010/07/01 Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5463455 Bytes = 5.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 0baca000, end 0bfffd9f ... OK Linux version 2.6.11.12-sec (gcc version 3.4.4) #1 Thu Jul 1 17:02:37 JST 2010 new message buffer at 0f700000 size 1048576 log_buf_len: 1048576 mpc85xx_cds_setup_arch Built 1 zonelists Kernel command line: root=/dev/ram rw console=ttyS0,9600 init=/sbin/init_change_root panic=1 mem=224M OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fbe79000 PID hash table entries: 1024 (order: 10, 16384 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 218752k available (2188k kernel code, 668k data, 316k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Freeing initrd memory: 5335k freed RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize i2c-algo-cpm: CPM2 I2C algorithm module version 0.1 (Mar 22, 2005) FCC ENET Version 0.3 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 316k init switching initrd filesystem, ramdisk to tmpfs SCF Linux Boot Script 2006/03/04 for ROM boot environment fsl-sec2 hardware crypt accelerator model3a ver 0.02 enabled XSCF initial process start (pid=106) load /scf/modules/lites_ldrv.ko -- complete load /scf/modules/drvscftrace.ko -- complete load /scf/modules/sec2_rsa.ko -- complete load /scf/modules/sec2_md5.ko -- complete load /scf/modules/sec2_des.ko -- complete load /scf/modules/sec2_arc4.ko -- complete load /scf/modules/sec2_aes.ko -- complete load /scf/modules/sec2_sha256.ko -- complete load /scf/modules/sec2_sha1.ko -- complete load /scf/modules/hw_random.ko -- complete load /scf/modules/scsi_mod.ko -- complete load /scf/modules/sd_mod.ko -- complete load /scf/modules/usbcore.ko -- complete load /scf/modules/ohci-hcd.ko -- complete load /scf/modules/usb-storage.ko -- complete load /scf/modules/drvbootfmem.ko -- complete load /scf/modules/drvmbc.ko -- complete load /scf/modules/drvnand.ko -- complete load /scf/modules/drvffc.ko -- complete load /scf/modules/drvffcint.ko -- complete load /scf/modules/drvrtc.ko -- complete load /scf/modules/drvxscfuart.ko -- complete load /scf/modules/drvrci.ko -- complete load /scf/modules/drvtimer.ko -- complete load /scf/modules/drvsdic.ko -- complete load /scf/modules/sm2s.ko -- complete load /scf/modules/spkmdrv.ko -- complete mount /dev/mtdblock0 -> /hcp0/linux -- complete mount /dev/mtdblock1 -> /hcp0/scfprog -- complete mount /dev/mtdblock2 -> /hcp0/gendata -- complete mount /dev/mtdblock3 -> /hcp0/remcscm -- complete mount /dev/mtdblock4 -> /hcpcommon/setup -- complete mount /dev/mtdblock5 -> /hcpcommon/obp -- complete mount /dev/mtdblock6 -> /hcpcommon/tmp -- complete mount /dev/mtdblock11 -> /hcpcommon/var -- complete mount /dev/mtdblock12 -> /hcpcommon/scflog1 -- complete mount /dev/mtdblock13 -> /hcpcommon/scflog2 -- complete execute S00mtab -- complete execute S00portmap -- complete execute S00tmpmake -- complete execute S00varclean -- complete execute S10ldconfig -- complete execute S15last_dmesg -- complete execute S20cfgcreate -- complete execute S50iptables -- complete execute S60check -- complete execute S61restore -- complete execute S99syslogd -- complete initialize XSCF common database (STANDALONE) -- complete start /scf/sbin/dbs (pid=336) start /scf/sbin/ksyseventd (pid=337) start /scf/sbin/syseventd (pid=342) start /scf/init/scf_cmgrd (pid=350) start /scf/init/scf_coremgr (pid=351) start /scf/init/dualprocess (pid=352) check SCF operation mode (for OPNL access) -- complete initialize OPNL -- complete check SCF operation mode -- complete (ACTIVE) start /scf/sbin/dbs (pid=371) initialize XSCF common database (OWN) -- complete synchronize setup data (XSCF -> OPNL) -- complete initialize XSCF common database (ACTIVE) -- complete wait for database synchronization -- complete execute S00clis_all -- complete execute S10restore_ad -- complete execute S10restore_um -- complete execute S11network.sheth0: PHY is Intel LXT972A (1378e2) -- complete execute S15ntpcheck.sh -- complete execute S21daemons -- complete execute S51scflog_SCFboot.sh -- complete execute S82cod -- complete execute S98bui -- complete execute S00clis_active -- complete execute S00cmem_check -- complete execute S00tmp_login -- complete execute S18restorefmdlog -- complete execute S19setfmurl -- complete execute S29setfmconf -- complete execute S50setupSCFboot.sh -- complete execute S83setservicetagdata -- complete start /scf/sbin/scf_panelmgr (pid=801) start /scf/sbin/fmdsyncd (pid=802) start /scf/sbin/auditd (pid=804) start /scf/sbin/cmd (pid=805) start /scf/sbin/cmd_sub (pid=806) start /scf/sbin/errhandd (pid=807) start /scf/sbin/fjdrd (pid=808) start /scf/sbin/frura (pid=809) start /scf/sbin/mond (pid=810) start /scf/sbin/mond (pid=811) start /scf/sbin/powerd (pid=812) start /scf/sbin/rci (pid=813) start /scf/sbin/rci_dual (pid=814) start /scf/sbin/reset (pid=815) start /scf/sbin/resetra (pid=816) start /scf/sbin/rsyncprocess (pid=817) start /scf/sbin/scf_firmup_exed (pid=818) start /scf/sbin/scf_hardlog (pid=819) start /scf/sbin/scf_loganalyze (pid=820) start /scf/sbin/scf_procmeas (pid=821) start /scf/sbin/sequence (pid=822) start /scf/sbin/ttyd (pid=823) start /scf/sbin/rm_eventd (pid=824) start /scf/sbin/rm_queued (pid=825) start /scf/sbin/apcsd (pid=826) start /scf/sbin/codd (pid=827) start /scf/sbin/scf_firmup_ctld (pid=828) start /scf/sbin/fmd (pid=829) start /scf/sbin/dscpd (pid=1013) start /scf/sbin/monitor_msg (pid=1014) start /scf/sbin/picld (pid=1015) start /scf/sbin/sunmcrund (pid=1016) start /scf/sbin/dfrud (pid=1017) start /scf/sbin/iomgrd (pid=1018) start /scf/sbin/archd (pid=1050) wait for SCF_READY -- complete execute S20setupSCFready.sh -- complete execute S99rcclear -- complete execute S10iobox_scan -- complete execute S10restore_ad -- complete execute S10restore_um -- complete execute S84snmpd -- complete execute S85sunmc_esd -- complete execute S86limits -- complete execute S87opnl -- complete execute S99dr_recover.sh -- complete XSCF Initialize complete. Mar 29 00:44:56 sbcondb1 XSCF[106]: XSCF Initialize complete. login: default Change the panel mode switch to Locked and press return... Leave it in that position for at least 5 seconds. Change the panel mode switch to Service, and press return... XSCF> poweron -a DomainIDs to power on:00 Continue? [y|n] :y 00 :Powering on *Note* This command only issues the instruction to power-on. The result of the instruction can be checked by the "showlogs power". XSCF> console -d 0 Connect to DomainID 0?[y|n] :y POST Sequence 01 CPU Check POST Sequence 02 Banner LSB#00 (XSB#00-0): POST 2.13.0 (2010/02/17 10:36) POST Sequence 03 Fatal Check POST Sequence 04 CPU Register POST Sequence 05 STICK POST Sequence 06 MMU POST Sequence 07 Memory Initialize POST Sequence 08 Memory POST Sequence 09 Raw UE In Cache POST Sequence 0A Floating Point Unit POST Sequence 0B SC POST Sequence 0C Cacheable Instruction POST Sequence 0D Softint POST Sequence 0E CPU Cross Call POST Sequence 0F CMU-CH POST Sequence 10 PCI-CH POST Sequence 11 Master Device POST Sequence 12 DSCP POST Sequence 13 SC Check Before STICK Diag POST Sequence 14 STICK Stop POST Sequence 15 STICK Start POST Sequence 16 Error CPU Check POST Sequence 17 System Configuration POST Sequence 18 System Status Check POST Sequence 19 System Status Check After Sync POST Sequence 1A OpenBoot Start... POST Sequence Complete. Fujitsu SPARC Enterprise M3000 Server, using Domain console Copyright 2010 Sun Microsystems, Inc. All rights reserved. Copyright 2010 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved. OpenBoot 4.24.14, 32768 MB memory installed, Serial #10042244. Ethernet address 0:b:5d:e2:3b:84, Host ID: 80993b84. Aborting auto-boot sequence. {0} ok boot cdrom Boot device: /pci@0,600000/pci@0/pci@0/scsi@0/disk@4,0:f File and args: OpenBSD IEEE 1275 Bootblock 1.3 ..>> OpenBSD BOOT 1.6 Trying bsd... open /pci@0,600000/pci@0/pci@0/scsi@0/disk@4,0:f/etc/random.seed: No such file or directory Booting /pci@0,600000/pci@0/pci@0/scsi@0/disk@4,0:f/bsd 3864176@0x1000000+2448@0x13af670+3261928@0x1800000+932376@0x1b1c5e8 symbols @ 0xfdaec300 119 start=0x1000000 console is /pseudo-console Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.6 (RAMDISK) #178: Fri Aug 8 05:00:27 MDT 2014 dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK real mem = 34359738368 (32768MB) avail mem = 33803608064 (32237MB) mainbus0 at root: Fujitsu SPARC Enterprise M3000 Server cmp0 at mainbus0 core0 at cmp0 cpu0 at core0: FJSV,SPARC64-VII (rev 10.1) @ 2750 MHz cpu0: physical 64K instruction (64 b/l), 64K data (64 b/l), 5120K external (256 b/l) "FJSV,SPARC64-VII" at core0 not configured core1 at cmp0 "FJSV,SPARC64-VII" at core1 not configured "FJSV,SPARC64-VII" at core1 not configured "pseudo-mc" at mainbus0 not configured psycho0 at mainbus0: pci10cf,138f, impl 0, version 4, ign 200 psycho0: bus range 0-0, PCI bus 0 pci0 at psycho0 ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 "flashprom" at ebus0 addr 0-3fffff not configured com0 at ebus0 addr 400000-400007 ivec 0x2b: ns16550, no working fifo com0: console "scfc" at ebus0 addr 200000-20012f, 210000-210007, 300000-30ffff, 310000-31ffff, 320000-37ffff ivec 0x27 not configured "panel" at ebus0 addr 280030-280030 ivec 0x25 not configured pyro0 at mainbus0: "Oberon", rev 0, ign 0, bus A 2 to 255 pyro0: dvma map c0000000-ffffffff pci1 at pyro0 ppb0 at pci1 dev 0 function 0 "PLX PEX 8533" rev 0xaa pci2 at ppb0 bus 3 ppb1 at pci2 dev 0 function 0 "PLX PEX 8533" rev 0xaa pci3 at ppb1 bus 4 mpi0 at pci3 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: msi mpi0: IKKAKU, firmware 1.29.5.0 scsibus0 at mpi0: 173 targets sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST973402SSUN72G, 0603> SCSI3 0/direct fixed naa.5000c5000c514d8b sd0: 70007MB, 512 bytes/sector, 143374738 sectors cd0 at scsibus0 targ 4 lun 0: <MATSHITA, DVD-RAM UJ875AS, 1.00> ATAPI 5/cdrom removable ppb2 at pci2 dev 1 function 0 "PLX PEX 8533" rev 0xaa pci4 at ppb2 bus 5 ppb3 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci5 at ppb3 bus 6 bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x15, address 00:0b:5d:e5:f6:0c brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x16, address 00:0b:5d:e5:f6:0d brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb4 at pci2 dev 2 function 0 "PLX PEX 8533" rev 0xaa pci6 at ppb4 bus 7 ppb5 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 pci7 at ppb5 bus 8 bge2 at pci7 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x16, address 00:0b:5d:e5:f6:0e brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 bge3 at pci7 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x17, address 00:0b:5d:e5:f6:0f brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 ppb6 at pci2 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi pci8 at ppb6 bus 9 pyro1 at mainbus0: "Oberon", rev 0, ign 40, bus B 2 to 255 pyro1: dvma map c0000000-ffffffff pci9 at pyro1 ppb7 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa pci10 at ppb7 bus 3 ppb8 at pci10 dev 0 function 0 "PLX PEX 8533" rev 0xaa: msi pci11 at ppb8 bus 4 ppb9 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi pci12 at ppb9 bus 5 ppb10 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi pci13 at ppb10 bus 6 prtc0 at mainbus0 softraid0 at root scsibus1 at softraid0: 256 targets bootpath: /pci@0,600000/pci@0,0/pci@0,0/scsi@0,0/disk@4,0:f root on rd0a swap on rd0b dump on rd0b erase ^?, werase ^W, kill ^U, intr ^C, status ^T Welcome to the OpenBSD/sparc64 5.6 installation program. (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i At any prompt except password prompts you can escape to a shell by typing '!'. Default answers are shown in []'s and are selected by pressing RETURN. You can exit this program at any time by pressing Control-C, but this can leave your system in an inconsistent state. Terminal type? [sun] System hostname? (short form, e.g. 'foo') m3000 Available network interfaces are: bge0 bge1 bge2 bge3 vlan0. Which network interface do you wish to configure? (or 'done') [bge0] IPv4 address for bge0? (or 'dhcp' or 'none') [dhcp] DHCPDISCOVER on bge0 - interval 1 DHCPOFFER from 192.168.1.1 (00:1b:8b:d8:df:bc) DHCPREQUEST on bge0 to 255.255.255.255 DHCPACK from 192.168.1.1 (00:1b:8b:d8:df:bc) bound to 192.168.1.7 -- renewal in 7200 seconds. IPv6 address for bge0? (or 'rtsol' or 'none') [none] Available network interfaces are: bge0 bge1 bge2 bge3 vlan0. Which network interface do you wish to configure? (or 'done') [done] Using DNS domainname my.domain Using DNS nameservers at 192.168.1.1 Password for root account? (will not echo) Password for root account? (again) Start sshd(8) by default? [yes] yes Start ntpd(8) by default? [no] Setup a user? (enter a lower-case loginname, or 'no') [no] naruaki Full name for user naruaki? [naruaki] Password for user naruaki? (will not echo) Password for user naruaki? (again) Since you set up a user, disable sshd(8) logins to root? [yes] no What timezone are you in? ('?' for list) [Asia/Tokyo] Available disks are: sd0. Which disk is the root disk? ('?' for details) [sd0] Use DUIDs rather than device names in fstab? [yes] The auto-allocated layout for sd0 is: # size offset fstype [fsize bsize cpg] a: 5.0M 143369664 4.2BSD 2048 16384 1 # / c: 70007.2M 0 unused i: 70002.0M 63 NTFS disklabel: this architecture requires partition 'a' to start at sector 0 disklabel: partition a: partition extends past end of unit disklabel: warning, partition i: size % cylinder-size != 0 disklabel: warning, partition i: offset % cylinder-size != 0 Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] A disklabel: this architecture requires partition 'a' to start at sector 0 disklabel: partition a: partition extends past end of unit disklabel: warning, partition i: size % cylinder-size != 0 disklabel: warning, partition i: offset % cylinder-size != 0 The auto-allocated layout for sd0 is: # size offset fstype [fsize bsize cpg] a: 5.0M 143369664 4.2BSD 2048 16384 1 # / c: 70007.2M 0 unused i: 70002.0M 63 NTFS disklabel: this architecture requires partition 'a' to start at sector 0 disklabel: partition a: partition extends past end of unit disklabel: warning, partition i: size % cylinder-size != 0 disklabel: warning, partition i: offset % cylinder-size != 0 Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] disklabel: this architecture requires partition 'a' to start at sector 0 disklabel: partition a: partition extends past end of unit disklabel: warning, partition i: size % cylinder-size != 0 disklabel: warning, partition i: offset % cylinder-size != 0 The auto-allocated layout for sd0 is: # size offset fstype [fsize bsize cpg] a: 5.0M 143369664 4.2BSD 2048 16384 1 # / c: 70007.2M 0 unused i: 70002.0M 63 NTFS disklabel: this architecture requires partition 'a' to start at sector 0 disklabel: partition a: partition extends past end of unit disklabel: warning, partition i: size % cylinder-size != 0 disklabel: warning, partition i: offset % cylinder-size != 0 ... Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] c You will now create a Sun-style disklabel on the disk. The disklabel defines how OpenBSD splits up the disk into OpenBSD partitions in which filesystems and swap space are created. You must provide each filesystem's mountpoint in this program. This platform requires that partition offsets/sizes be on cylinder boundaries. Partition offsets/sizes will be rounded to the nearest cylinder automatically. Label editor (enter '?' for help at any prompt) > ? Available commands: ? | h - show help n [part] - set mount point A - auto partition all space p [unit] - print partitions a [part] - add partition q - quit & save changes b - set OpenBSD boundaries R [part] - resize auto allocated partition c [part] - change partition size r - display free space D - reset label to default s [path] - save label to file d [part] - delete partition U - undo all changes e - edit drive parameters u - undo last change g [d|u] - [d]isk or [u]ser geometry w - write label to disk i - modify disklabel UID X - toggle expert mode l [unit] - print disk label header x - exit & lose changes M - disklabel(8) man page z - delete all partitions m [part] - modify partition Suffixes can be used to indicate units other than sectors: 'b' (bytes), 'k' (kilobytes), 'm' (megabytes), 'g' (gigabytes) 't' (terabytes) 'c' (cylinders), '%' (% of total disk), '&' (% of free space). Values in non-sector units are truncated to the nearest cylinder boundary. > z > w > x '/' must be configured! The auto-allocated layout for sd0 is: # size offset fstype [fsize bsize cpg] a: 1.0G 0 4.2BSD 2048 16384 1 # / b: 6.2G 2106432 swap c: 68.4G 0 unused d: 4.0G 15141888 4.2BSD 2048 16384 1 # /tmp e: 8.1G 23537088 4.2BSD 2048 16384 1 # /var f: 2.0G 40439424 4.2BSD 2048 16384 1 # /usr g: 1.0G 44642112 4.2BSD 2048 16384 1 # /usr/X11R6 h: 8.1G 46748544 4.2BSD 2048 16384 1 # /usr/local i: 2.0G 63813696 4.2BSD 2048 16384 1 # /usr/src j: 2.0G 68016384 4.2BSD 2048 16384 1 # /usr/obj k: 33.9G 72219072 4.2BSD 2048 16384 1 # /home Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] e Label editor (enter '?' for help at any prompt) > l # /dev/rsd0c: type: SCSI disk: SCSI disk label: ST973402SSUN72G duid: 0000000000000000 flags: vendor bytes/sector: 512 sectors/track: 424 tracks/cylinder: 24 sectors/cylinder: 10176 cylinders: 14089 total sectors: 143374738 boundstart: 0 boundend: 143374738 drivedata: 0 ... Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] A /dev/rsd0a: 1028.5MB in 2106432 sectors of 512 bytes 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0k: 34741.5MB in 71150592 sectors of 512 bytes 172 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0d: 4099.2MB in 8395200 sectors of 512 bytes 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0f: 2052.1MB in 4202688 sectors of 512 bytes 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0g: 1028.5MB in 2106432 sectors of 512 bytes 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0h: 8332.6MB in 17065152 sectors of 512 bytes 42 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0j: 2052.1MB in 4202688 sectors of 512 bytes 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0i: 2052.1MB in 4202688 sectors of 512 bytes 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/rsd0e: 8253.1MB in 16902336 sectors of 512 bytes 41 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each /dev/sd0a (d44e56b406d1911c.a) on /mnt type ffs (rw, asynchronous, local) /dev/sd0k (d44e56b406d1911c.k) on /mnt/home type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0d (d44e56b406d1911c.d) on /mnt/tmp type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0f (d44e56b406d1911c.f) on /mnt/usr type ffs (rw, asynchronous, local, nodev) /dev/sd0g (d44e56b406d1911c.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous, local, nodev) /dev/sd0h (d44e56b406d1911c.h) on /mnt/usr/local type ffs (rw, asynchronous, local, nodev) /dev/sd0j (d44e56b406d1911c.j) on /mnt/usr/obj type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0i (d44e56b406d1911c.i) on /mnt/usr/src type ffs (rw, asynchronous, local, nodev, nosuid) /dev/sd0e (d44e56b406d1911c.e) on /mnt/var type ffs (rw, asynchronous, local, nodev, nosuid) Let's install the sets! Location of sets? (cd disk http or 'done') [cd] Available CD-ROMs are: cd0. Which CD-ROM contains the install media? (or 'done') [cd0] Pathname to the sets? (or 'done') [5.6/sparc64] Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] etc56.tgz [ ] xbase56.tgz [ ] xserv56.tgz [X] bsd.rd [X] comp56.tgz [ ] xetc56.tgz [X] bsd.mp [X] man56.tgz [ ] xshare56.tgz [X] base56.tgz [X] game56.tgz [ ] xfont56.tgz Set name(s)? (or 'abort' or 'done') [done] Directory does not contain SHA256.sig. Continue without verification? [no] Location of sets? (cd disk http or 'done') [cd] Available CD-ROMs are: cd0. Which CD-ROM contains the install media? (or 'done') [cd0] Pathname to the sets? (or 'done') [5.6/sparc64] Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] etc56.tgz [ ] xbase56.tgz [ ] xserv56.tgz [X] bsd.rd [X] comp56.tgz [ ] xetc56.tgz [X] bsd.mp [X] man56.tgz [ ] xshare56.tgz [X] base56.tgz [X] game56.tgz [ ] xfont56.tgz Set name(s)? (or 'abort' or 'done') [done] Directory does not contain SHA256.sig. Continue without verification? [no] Location of sets? (cd disk http or 'done') [cd] Available CD-ROMs are: cd0. Which CD-ROM contains the install media? (or 'done') [cd0] Pathname to the sets? (or 'done') [5.6/sparc64] Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] etc56.tgz [ ] xbase56.tgz [ ] xserv56.tgz [X] bsd.rd [X] comp56.tgz [ ] xetc56.tgz [X] bsd.mp [X] man56.tgz [ ] xshare56.tgz [X] base56.tgz [X] game56.tgz [ ] xfont56.tgz Set name(s)? (or 'abort' or 'done') [done] Directory does not contain SHA256.sig. Continue without verification? [no] Location of sets? (cd disk http or 'done') [cd] Available CD-ROMs are: cd0. Which CD-ROM contains the install media? (or 'done') [cd0] Pathname to the sets? (or 'done') [5.6/sparc64] ... Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] etc56.tgz [ ] xbase56.tgz [ ] xserv56.tgz [X] bsd.rd [X] comp56.tgz [ ] xetc56.tgz [X] bsd.mp [X] man56.tgz [ ] xshare56.tgz [X] base56.tgz [X] game56.tgz [ ] xfont56.tgz Set name(s)? (or 'abort' or 'done') [done] Directory does not contain SHA256.sig. Continue without verification? [no] Location of sets? (cd disk http or 'done') [cd] http HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] HTTP Server? (hostname, list#, 'done' or '?') [ftp.jaist.ac.jp] Server directory? [pub/OpenBSD/5.6/sparc64] Select sets by entering a set name, a file name pattern or 'all'. De-select sets by prepending a '-' to the set name, file name pattern or 'all'. Selected sets are labelled '[X]'. [X] bsd [X] etc56.tgz [ ] xbase56.tgz [ ] xserv56.tgz [X] bsd.rd [X] comp56.tgz [ ] xetc56.tgz [X] bsd.mp [X] man56.tgz [ ] xshare56.tgz [X] base56.tgz [X] game56.tgz [ ] xfont56.tgz Set name(s)? (or 'abort' or 'done') [done] Get/Verify SHA256.sig 100% |**************************| 2161 00:00 Signature Verified Get/Verify bsd 100% |**************************| 9017 KB 00:07 Get/Verify bsd.rd 100% |**************************| 2616 KB 00:04 Get/VeMar 29 01:06:17 sbcondb1 fmd: SOURCE: sde, REV: 1.16, CSN: PX61035173 EVENT-ID: dfc125c9-b6d9-45ab-9f0c-5a9901b2c3d8 Refer to http://www.fujitsu.com/sparcenterprise/msg/SCF-8003-HA for detailed information. exit from console. XSCF> XSCF> ... XSCF> poweron -a DomainIDs to power on:00 Continue? [y|n] :y 00 :Not powering on :Poweron canceled due to missing component. XSCF> poweron -a DomainIDs to power on:00 Continue? [y|n] :y 00 :Not powering on :Poweron canceled due to missing component. XSCF> XSCF uboot 01080001 (May 8 2009 - 15:09:36) XSCF uboot 01080001 (May 8 2009 - 15:09:36) SCF board boot factor = 4080 memory test .. Memory compare test ................finish DDR Real size: 256 MB DDR: 224 MB ## Booting image at ff800000 ... Image Name: XSCF kernel 01090003 2.6.11.12-s Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1457048 Bytes = 1.4 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at ff980000 ... Image Name: XSCF rootfs 01090003 ,2010/07/01 Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5463455 Bytes = 5.2 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 0baca000, end 0bfffd9f ... OK Linux version 2.6.11.12-sec (gcc version 3.4.4) #1 Thu Jul 1 17:02:37 JST 2010 new message buffer at 0f700000 size 1048576 log_buf_len: 1048576 mpc85xx_cds_setup_arch Built 1 zonelists Kernel command line: root=/dev/ram rw console=ttyS0,9600 init=/sbin/init_change_root panic=1 mem=224M OpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fbe79000 PID hash table entries: 1024 (order: 10, 16384 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 218752k available (2188k kernel code, 668k data, 316k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Freeing initrd memory: 5335k freed RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize i2c-algo-cpm: CPM2 I2C algorithm module version 0.1 (Mar 22, 2005) FCC ENET Version 0.3 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 316k init switching initrd filesystem, ramdisk to tmpfs SCF Linux Boot Script 2006/03/04 for ROM boot environment fsl-sec2 hardware crypt accelerator model3a ver 0.02 enabled XSCF initial process start (pid=106) load /scf/modules/lites_ldrv.ko -- complete load /scf/modules/drvscftrace.ko -- complete load /scf/modules/sec2_rsa.ko -- complete load /scf/modules/sec2_md5.ko -- complete load /scf/modules/sec2_des.ko -- complete load /scf/modules/sec2_arc4.ko -- complete load /scf/modules/sec2_aes.ko -- complete load /scf/modules/sec2_sha256.ko -- complete load /scf/modules/sec2_sha1.ko -- complete load /scf/modules/hw_random.ko -- complete load /scf/modules/scsi_mod.ko -- complete load /scf/modules/sd_mod.ko -- complete load /scf/modules/usbcore.ko -- complete load /scf/modules/ohci-hcd.ko -- complete load /scf/modules/usb-storage.ko -- complete load /scf/modules/drvbootfmem.ko -- complete load /scf/modules/drvmbc.ko -- complete load /scf/modules/drvnand.ko -- complete load /scf/modules/drvffc.ko -- complete load /scf/modules/drvffcint.ko -- complete load /scf/modules/drvrtc.ko -- complete load /scf/modules/drvxscfuart.ko -- complete load /scf/modules/drvrci.ko -- complete load /scf/modules/drvtimer.ko -- complete load /scf/modules/drvsdic.ko -- complete load /scf/modules/sm2s.ko -- complete load /scf/modules/spkmdrv.ko -- complete mount /dev/mtdblock0 -> /hcp0/linux -- complete mount /dev/mtdblock1 -> /hcp0/scfprog -- complete mount /dev/mtdblock2 -> /hcp0/gendata -- complete mount /dev/mtdblock3 -> /hcp0/remcscm -- complete mount /dev/mtdblock4 -> /hcpcommon/setup -- complete mount /dev/mtdblock5 -> /hcpcommon/obp -- complete mount /dev/mtdblock6 -> /hcpcommon/tmp -- complete mount /dev/mtdblock11 -> /hcpcommon/var -- complete mount /dev/mtdblock12 -> /hcpcommon/scflog1 -- complete mount /dev/mtdblock13 -> /hcpcommon/scflog2 -- complete execute S00mtab -- complete execute S00portmap -- complete execute S00tmpmake -- complete execute S00varclean -- complete execute S10ldconfig -- complete execute S15last_dmesg -- complete execute S20cfgcreate -- complete execute S50iptables -- complete execute S60check -- complete execute S61restore -- complete execute S99syslogd -- complete initialize XSCF common database (STANDALONE) -- complete start /scf/sbin/dbs (pid=336) start /scf/sbin/ksyseventd (pid=337) start /scf/sbin/syseventd (pid=342) start /scf/init/scf_cmgrd (pid=350) start /scf/init/scf_coremgr (pid=351) start /scf/init/dualprocess (pid=352) check SCF operation mode (for OPNL access) -- complete initialize OPNL -- complete check SCF operation mode -- complete (ACTIVE) start /scf/sbin/dbs (pid=371) initialize XSCF common database (OWN) -- complete synchronize setup data (XSCF -> OPNL) -- complete initialize XSCF common database (ACTIVE) -- complete wait for database synchronization -- complete execute S00clis_all -- complete execute S10restore_ad -- complete execute S10restore_um -- complete execute S11network.sheth0: PHY is Intel LXT972A (1378e2) -- complete execute S15ntpcheck.sh -- complete execute S21daemons -- complete execute S51scflog_SCFboot.sh -- complete execute S82cod -- complete execute S98bui -- complete execute S00clis_active -- complete execute S00cmem_check -- complete execute S00tmp_login -- complete execute S18restorefmdlog -- complete execute S19setfmurl -- complete execute S29setfmconf -- complete execute S50setupSCFboot.sh -- complete execute S83setservicetagdata -- complete start /scf/sbin/scf_panelmgr (pid=801) start /scf/sbin/fmdsyncd (pid=802) start /scf/sbin/auditd (pid=804) start /scf/sbin/cmd (pid=805) start /scf/sbin/cmd_sub (pid=806) start /scf/sbin/errhandd (pid=807) start /scf/sbin/fjdrd (pid=808) start /scf/sbin/frura (pid=809) start /scf/sbin/mond (pid=810) start /scf/sbin/mond (pid=811) start /scf/sbin/powerd (pid=812) start /scf/sbin/rci (pid=813) start /scf/sbin/rci_dual (pid=814) start /scf/sbin/reset (pid=815) start /scf/sbin/resetra (pid=816) start /scf/sbin/rsyncprocess (pid=817) start /scf/sbin/scf_firmup_exed (pid=818) start /scf/sbin/scf_hardlog (pid=819) start /scf/sbin/scf_loganalyze (pid=820) start /scf/sbin/scf_procmeas (pid=821) start /scf/sbin/sequence (pid=822) start /scf/sbin/ttyd (pid=823) start /scf/sbin/rm_eventd (pid=824) start /scf/sbin/rm_queued (pid=825) start /scf/sbin/apcsd (pid=826) start /scf/sbin/codd (pid=827) start /scf/sbin/scf_firmup_ctld (pid=828) start /scf/sbin/fmd (pid=829) start /scf/sbin/dscpd (pid=1013) start /scf/sbin/monitor_msg (pid=1014) start /scf/sbin/picld (pid=1015) start /scf/sbin/sunmcrund (pid=1016) start /scf/sbin/dfrud (pid=1017) start /scf/sbin/iomgrd (pid=1018) start /scf/sbin/archd (pid=1050) wait for SCF_READY -- complete execute S20setupSCFready.sh -- complete execute S99rcclear -- complete execute S10iobox_scan -- complete execute S10restore_ad -- complete execute S10restore_um -- complete execute S84snmpd -- complete execute S85sunmc_esd -- complete execute S86limits -- complete execute S87opnl -- complete execute S99dr_recover.sh -- complete XSCF Initialize complete. Mar 29 01:44:53 sbcondb1 XSCF[106]: XSCF Initialize complete. login: login: default Change the panel mode switch to Locked and press return... Leave it in that position for at least 5 seconds. Change the panel mode switch to Service, and press return... XSCF> poweron -a DomainIDs to power on:00 Continue? [y|n] :y 00 :Not powering on :Poweron canceled due to missing component. ... XSCF> restoredefaults Permission denied. XSCF> showstatus * MBU_A Status:Faulted; * CPU Status:Deconfigured; * MEM#0A Status:Deconfigured; * MEM#0B Status:Deconfigured; * MEM#1A Status:Deconfigured; * MEM#1B Status:Deconfigured; * MEM#2A Status:Deconfigured; * MEM#2B Status:Deconfigured; * MEM#3A Status:Deconfigured; * MEM#3B Status:Deconfigured; XSCF> showhardconf SPARC Enterprise M3000; + Serial:PX61035173; Operator_Panel_Switch:Service; + Power_Supply_System:Single; SCF-ID:XSCF#0; + System_Power:Off; System_Phase:Cabinet Power Off; Domain#0 Domain_Status:Powered Off; * MBU_A Status:Faulted; Ver:0401h; Serial:PP103503BF ; + FRU-Part-Number:CA07082-D061 E0 /541-4282-05 ; * + CPU Status:Deconfigured; + Freq:2.750 GHz; Type:32; + Core:2; Strand:2; + Memory_Size:32 GB; * MEM#0A Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e0682857; + Type:4B; Size:4 GB; * MEM#0B Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e0682855; + Type:4B; Size:4 GB; * MEM#1A Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e068285a; + Type:4B; Size:4 GB; * MEM#1B Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e0682858; + Type:4B; Size:4 GB; * MEM#2A Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e068285c; + Type:4B; Size:4 GB; * MEM#2B Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e0682859; + Type:4B; Size:4 GB; * MEM#3A Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e068285b; + Type:4B; Size:4 GB; * MEM#3B Status:Deconfigured; + Code:2c000000000000000836HTF51272PY-667G10100-e0682853; + Type:4B; Size:4 GB; OPNL Status:Normal; Ver:0101h; Serial:PP10350414 ; + FRU-Part-Number:CA07082-D021 A2 /541-3306-01 ; PSU#0 Status:Normal; Serial:EA1019A011; + FRU-Part-Number:CA01022-0720 10K /300-2193-10 ; + Power_Status:Input fail; + Type:AC; PSU#1 Status:Normal; Serial:EA1019A013; + FRU-Part-Number:CA01022-0720 10K /300-2193-10 ; + Power_Status:Off; + Type:AC; FANBP_B Status:Normal; Ver:0101h; Serial:PP103503ZJ ; + FRU-Part-Number:CA20399-B12X 009AC/541-3304-03 ; FAN_A#0 Status:Normal; FAN_A#1 Status:Normal; XSCF> showbords -a shell: showbords: command not found XSCF> showboards -a XSB DID(LSB) Assignment Pwr Conn Conf Test Fault ---- -------- ----------- ---- ---- ---- ------- -------- 00-0 00(00) Unavailable n n n Unknown Faulted ... ------------------------------------------------------------------------------------- I wish for the development of OpenBSD/sparc64... -- Naruaki.Etomi nullnil...@gmail.com
