[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread John Williams
At 20:57 12/03/03 +, you wrote: Hi, I'm a Linux newbie so please be patient. I want to use my ADSL connection through the USD speedtouch 330 to connect with the net but have got stuck with the setup. I have downloaded the tar ball from the Speedtouch web site and gone through the

[speedtouch] Re: [PATCH] Skipping junk bytes

2003-03-13 Thread nsc
Ok Overbeek (mz) wrote: Tried the patches, but alas without any improvement..still getting regular CRC-errors.. did you try the 'undocumented' -b option into modem_run ? I repeat, this, and the atm.c patch cured it for me. (that'll teach me for messing with

[speedtouch] Re: [PATCH] Skipping junk bytes

2003-03-13 Thread Ok Overbeek (mz)
Sure, I tried both of them (had the -b already on). Anyway, as long as I do NOT switch on any logging/debugging in pppoa3, everything runs good enough for me..download speeds are around the 24 Kbps (I still have a 256/64 connection). Ok O. nsc wrote: Ok Overbeek (mz) wrote: Tried the

[speedtouch] Re: [PATCH] Skipping junk bytes

2003-03-13 Thread Vaessen, E.M.J. (Ed)
It may not be of any help but my CRC errors stopped as soon as I switched from onboard USB of my GA-7VAX mother board VIA chipset to a USB PCI card with the OPTi chipset. Ed -Oorspronkelijk bericht- Van: nsc [mailto:[EMAIL PROTECTED] Verzonden: donderdag 13 maart 2003 12:07 Aan:

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Paul Hudson
- Original Message - From: Martin Howitt [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, March 12, 2003 11:34 PM Subject: [speedtouch] Re: How do I set up my Speedtouch Hi Paul On Wed, 2003-03-12 at 20:57, Paul Hudson wrote: Hi, I'm a Linux newbie so please be

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Frans J King
Try cat /var/log/messages syslog.txt and send the relevant parts - stuff related to modem_run, pppoa3, pppd at the end of the syslog.txt - to the list. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hudson Sent: 13 March 2003 18:41 To: [EMAIL

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Martin Howitt
On Thu, 2003-03-13 at 18:41, Paul Hudson wrote: snippage Hi Martin, the return from the ifconfig ppp0 is shown below, ppp0 Link encap:Point-to-Point Protocol POINTOPOINT NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Jose Bernardo Silva
Also, add to those questions, - Does his isp use pppoe instead of pppoa? - Are his vic/vpi set correctly? --- Jose Bernardo B R Silva | Source Mage GNU/Linux Developer [EMAIL PROTECTED] | http://www.sourcemage.org http://counter.li.org #245602

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Paul Hudson
firstly the command ifconfig on its own should show the ppp0 entry. If not, then pppd hasn't started properly, so read on.:) the syslog is a file in /var/log, called either syslog or messages. We are looking for lines in this file that relate to the modem. so look for lines beginning

[speedtouch] Re: How do I set up my Speedtouch

2003-03-13 Thread Hugo Portela
Hello, Paul Hudson, === At 2003-03-13, 20:59:00 you wrote: === firstly the command ifconfig on its own should show the ppp0 entry. If not, then pppd hasn't started properly, so read on.:) the syslog is a file in /var/log, called either syslog or messages. We are looking for lines

[speedtouch] Re: need some help

2003-03-13 Thread Ok Overbeek (mz)
Look here, xz!Le, it's late (here) but maybe this can help: have a look in the file /etc/sysconfig/network and if it contains some nonsensical line GATEWAY=xxx.xxx.xxx.xxx, remove that line and retry Good luck to you Ok xz!Le wrote: I used your SpeedTouchUSB-HOWTO using