[speedtouch] Problem USB and SPEEDTOUCH
I just received my modem and it works fine with winXP. In fedora core 1 i have some problems : the leds are not lighting. I have a lot of usb devices which are well regognised under fedora so i don't think to a USB problem but i'm not sure ... My motherboard is an asus A7N8X-VM/400 with video/lan/usb2. Please help me. Eric Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
eric tanguy wrote: I just received my modem and it works fine with winXP. In fedora core 1 i have some problems : the leds are not lighting. I have a lot of usb devices which are well regognised under fedora so i don't think to a USB problem but i'm not sure ... My motherboard is an asus A7N8X-VM/400 with video/lan/usb2. Please help me. Eric Can it see the dsl model? -- Garry Atkins-Coolman Email: [EMAIL PROTECTED] Tel: 0870 246 0298 Fax: 0870 133 1219 Mob: 0783 010 3889 It's not reality that's important, but how you perceive things. This e-mail has been scanned for viruses using Norton AntiVirus Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
Garry Atkins-Coolman wrote: eric tanguy wrote: I just received my modem and it works fine with winXP. In fedora core 1 i have some problems : the leds are not lighting. I have a lot of usb devices which are well regognised under fedora so i don't think to a USB problem but i'm not sure ... My motherboard is an asus A7N8X-VM/400 with video/lan/usb2. Please help me. Eric Can it see the dsl model? Modem too :oP Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message - From: eric tanguy [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, May 15, 2004 1:00 PM Subject: [speedtouch] Problem USB and SPEEDTOUCH I just received my modem and it works fine with winXP. In fedora core 1 i have some problems : the leds are not lighting. I have a lot of usb devices which are well regognised under fedora so i don't think to a USB problem but i'm not sure ... My motherboard is an asus A7N8X-VM/400 with video/lan/usb2. Please help me. Eric What display cat /proc/bus/usb/devices | grep 06b9 If it is a speedtouch Rev= 4.00, you mandatory need to use the new V1.2 driver and it is not bad for other model. Read what display modem_run usage (particullary for optional bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware) Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] speedbundle installaion on SuSE9
Greetings, I an new to the list. I have tried searching the archives for my elementary problem. it is as folllows: I need installation instructions for speedbundle on SuSE9 (kernel 2.4.21). I downloaded the required program from: http://linux-usb.sourceforge.net/SpeedTouch/download/index.html I also obtained a) firmware.bin, b)alcausadsl.sys and c)KQS6P2.eni and I have these in in a directory /usr/src/seedbundle-1.0 next to the kernel sources. I would be grateful for info on the next step(s) or indeed whether I have downloaded the correct packages. Yours sincerely lux-integ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
What display cat /proc/bus/usb/devices | grep 06b9 Nothing If it is a speedtouch Rev= 4.00, you mandatory need to use the new V1.2 driver and it is not bad for other model. Read what display modem_run usage (particullary for optional bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware) I downloaded the targz file (1.2) from the sourceforge website and installed it with the indications found in the french howto (12 Mai 2004). I use alcaudsl.sys from my winxp renamed in mgmt.o and placed in /usr/local/share/speedtouch/ With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no answer. My biggest problem (i think) is that the leds on the modem are OFF! Thanxes Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
speedtouch 330 eric tanguy wrote: I just received my modem and it works fine with winXP. In fedora core 1 i have some problems : the leds are not lighting. I have a lot of usb devices which are well regognised under fedora so i don't think to a USB problem but i'm not sure ... My motherboard is an asus A7N8X-VM/400 with video/lan/usb2. Please help me. Eric Can it see the dsl model? -- Garry Atkins-Coolman Email: [EMAIL PROTECTED] Tel: 0870 246 0298 Fax: 0870 133 1219 Mob: 0783 010 3889 It's not reality that's important, but how you perceive things. This e-mail has been scanned for viruses using Norton AntiVirus Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message -
From: eric tanguy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, May 15, 2004 7:05 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
What display cat /proc/bus/usb/devices | grep 06b9
Nothing
Is you usb working? enabled in the bios? ;-)
I think usbcore and usb{ehci|uhci|ohci} is not loaded
What kernel version do you have?
V2.6.5 kernel had problem with many usb adsl modem but usb is not dead like
yours.
If it is a speedtouch Rev= 4.00, you mandatory need to use the new V1.2
driver and it is not bad for other model.
Read what display modem_run usage (particullary for optional bootloader
with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
I downloaded the targz file (1.2) from the sourceforge website and
installed it with the indications found in the french howto (12 Mai 2004).
I use alcaudsl.sys from my winxp renamed in mgmt.o and placed in
/usr/local/share/speedtouch/
If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if it
is a Rev4.00
With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no answer.
My biggest problem (i think) is that the leds on the modem are OFF!
Thanxes
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] installing speedbundle on suse9
Greetings, In trying to install speedbundle (current version) on a machine running SuSE9, I obtained the following output after running 'make'. Some help would be appreciated. Yours sincerely lux-integ -- Binary/unsupported file stripped by Listar -- -- Type: text/x-diff -- File: speedbundle-make-error-on-suse9 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message -
From: eric tanguy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, May 15, 2004 7:05 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
What display cat /proc/bus/usb/devices | grep 06b9
Nothing
Is you usb working? enabled in the bios? ;-)
I think usbcore and usb{ehci|uhci|ohci} is not loaded
Yes usb works fine i have a scanner and 2 HDs
What kernel version do you have?
V2.6.5 kernel had problem with many usb adsl modem but usb is not dead
like yours.
I'm not sure but 2.4.? (the initial fedora core 1 kernel because i have no
internet access ...)
If it is a speedtouch Rev= 4.00, you mandatory need to use the new
V1.2 driver and it is not bad for other model.
Read what display modem_run usage (particullary for optional
bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
I downloaded the targz file (1.2) from the sourceforge website and
installed it with the indications found in the french howto (12 Mai
2004). I use alcaudsl.sys from my winxp renamed in mgmt.o and placed
in /usr/local/share/speedtouch/
If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if
it is a Rev4.00
Where can i find these files and how to know the version i have to use ?
With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no
answer. My biggest problem (i think) is that the leds on the modem are
OFF! Thanxes
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message -
From: eric tanguy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, May 15, 2004 7:30 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message -
From: eric tanguy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, May 15, 2004 7:05 PM
Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH
What display cat /proc/bus/usb/devices | grep 06b9
Nothing
Is you usb working? enabled in the bios? ;-)
I think usbcore and usb{ehci|uhci|ohci} is not loaded
Yes usb works fine i have a scanner and 2 HDs
What kernel version do you have?
V2.6.5 kernel had problem with many usb adsl modem but usb is not dead
like yours.
I'm not sure but 2.4.? (the initial fedora core 1 kernel because i have no
internet access ...)
uname -r
will show your running kernel version
lsmod | grep usb
will show what usb driver you use. If nothing is display, you need before
to solve this issue.
Try
modprobe usbcore
on of the three drivers usb-uhci usb-ohci usb-ehci need to be loaded too
with modprobe
next you need to mount usbdevfs with
mount -n -t usbdevfs usbdevfs /proc/bus/usb
If it is a speedtouch Rev= 4.00, you mandatory need to use the new
V1.2 driver and it is not bad for other model.
Read what display modem_run usage (particullary for optional
bootloader with is mandatory with Rev 4.00 and zzzlp2.eni firmware)
I downloaded the targz file (1.2) from the sourceforge website and
installed it with the indications found in the french howto (12 Mai
2004). I use alcaudsl.sys from my winxp renamed in mgmt.o and placed
in /usr/local/share/speedtouch/
If you have windows V3 driver, the firmware is no more in alcaudsl.sys.
Look for KQ6DP{1|2}.eni if Rev={0.00|2.00} or and both ZZZLP{1|2}.eni if
it is a Rev4.00
Where can i find these files and how to know the version i have to use ?
You will see the Rev with the first command I send you when your usb will be
in a working state.
cat /proc/bus/usb/devices | grep 06b9
With modem_run -f /usr/local/share/speedtouch/mgmt.o there is no
answer. My biggest problem (i think) is that the leds on the modem are
OFF! Thanxes
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire :
mailto:[EMAIL PROTECTED]
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] speedbundle and suse9
Greetings, In trying to install speedbundle (current version) on a machine running SuSE9, I obtained the output (below) after running 'make'. Some help would be appreciated. Yours sincerely lux-integ make[1]: Entering directory `/usr/local/speedbundle-1.0/firmware_loader' cd src make make[2]: Entering directory `/usr/local/speedbundle-1.0/firmware_loader/src' gcc -Wall -I. -I/usr/include -I/usr/include -O2 -DVERSION=\1.2-beta2\ -c extract.c gcc -Wall -I. -I/usr/include -I/usr/include -O2 -DVERSION=\1.2-beta2\ -D_REENTRANT -D_THREAD_SAFE -o pusb.o -c pusb-linux.c pusb-linux.c:66: error: redefinition of `struct usb_device_descriptor' pusb-linux.c: In function `pusb_control_msg': pusb-linux.c:164: error: structure has no member named `requesttype' pusb-linux.c:165: error: structure has no member named `request' pusb-linux.c:166: error: structure has no member named `value' pusb-linux.c:167: error: structure has no member named `index' pusb-linux.c:168: error: structure has no member named `length' make[2]: *** [pusb.o] Error 1 make[2]: Leaving directory `/usr/local/speedbundle-1.0/firmware_loader/src' make[1]: *** [modem] Error 2 make[1]: Leaving directory `/usr/local/speedbundle-1.0/firmware_loader' make: *** [build-stamp] Error 2 LFS-p2i686:/usr/local/speedbundle-1.0 # Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
uname -r will show your running kernel version 2.4.22-1.2115.nptl lsmod | grep usb will show what usb driver you use. If nothing is display, you need before to solve this issue. usb-storage75136 1 scsi_mod 107080 4 [sg sd_mod usb-storage] usb-ohci 21160 0 (unused) usbcore78368 1 [usb-storage hid ehci-hcd usb-ohci] Try modprobe usbcore on of the three drivers usb-uhci usb-ohci usb-ehci need to be loaded too with modprobe next you need to mount usbdevfs with mount -n -t usbdevfs usbdevfs /proc/bus/usb mount : usbdevfs déjà monté ou /proc/bus/usb occupé mount : selon mtab, usbdevfs est déjà monté sur /proc/bus/usb Here it is the result that seems good ... for me ! Thanxes Eric Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message - From: eric tanguy [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, May 15, 2004 8:23 PM Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH uname -r will show your running kernel version 2.4.22-1.2115.nptl lsmod | grep usb will show what usb driver you use. If nothing is display, you need before to solve this issue. usb-storage75136 1 scsi_mod 107080 4 [sg sd_mod usb-storage] usb-ohci 21160 0 (unused) usbcore78368 1 [usb-storage hid ehci-hcd usb-ohci] Try modprobe usbcore on of the three drivers usb-uhci usb-ohci usb-ehci need to be loaded too with modprobe next you need to mount usbdevfs with mount -n -t usbdevfs usbdevfs /proc/bus/usb mount : usbdevfs déjà monté ou /proc/bus/usb occupé mount : selon mtab, usbdevfs est déjà monté sur /proc/bus/usb Here it is the result that seems good ... for me ! Yes it should. So what display cat /proc/bus/usb/devices | grep Rev Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Fedora Core 2 Test 3 Issues (2.6.5 kernel)
You better raise this issue at the [EMAIL PROTECTED] . Maybe somebody on that list can update you on the status of Fedora Core 2 in regard to this bug. It's a kernel problem and will be fixed in 2.6.7. Maybe the fedora people can backport the fix (= a bunch of changes in drivers/usb/core/devio.c by yours truly). Ciao, Duncan. Duncan, I have also noticed the problems with FC2 test3, and am willing to try to make the changes in the final version of FC2 which will be released next week. Could you then please send me the required file(s) that I need to check and update? And maybe some pointers where in the source files I need to look... When I get it to work I can post a patch file, so that every FC2 user can enjoy his Speedtouch again. Aad Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
Yes it should. So what display cat /proc/bus/usb/devices | grep Rev P: Vendor= ProdID= Rev= 2.04 P: Vendor=0e79 ProdID=1105 Rev= 0.00 P: Vendor= ProdID= Rev= 0.00 I have also a problem with my 2 usb2 HDs : sometimes only one (one or the other) is detected and mountable. maybe this cousd be helpfull. Eric Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
This may be a power issue on USB? Could you try without any other hungry other device pluged in you usb bus? (or in the other controller because you have one ehci-hcd and one usb-ohci) Ok you are right!! It seems that only 2 over 6 usb ports are self powered under linux (this is not the same on windows because my modem works fine connected to all differents ports). It's not a problem because i just have a modem and a mini HD which need powered by usb but i would like to know why ... Now i have : P: Vendor=06b9 ProdID=4061 Rev= 4.00 Which firmware i need and where to find it ? How configure and test my connection because i tried and it didn't work. Eric Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Problem USB and SPEEDTOUCH
- Original Message - From: eric tanguy [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, May 16, 2004 12:38 AM Subject: [speedtouch] Re: Problem USB and SPEEDTOUCH This may be a power issue on USB? Could you try without any other hungry other device pluged in you usb bus? (or in the other controller because you have one ehci-hcd and one usb-ohci) Ok you are right!! It seems that only 2 over 6 usb ports are self powered under linux (this is not the same on windows because my modem works fine connected to all differents ports). It's not a problem because i just have a modem and a mini HD which need powered by usb but i would like to know why ... Now i have : P: Vendor=06b9 ProdID=4061 Rev= 4.00 Which firmware i need and where to find it ? How configure and test my connection because i tried and it didn't work. Eric You need the zzzlp(x) serie with Rev 4.00 modem_run -v 1 -t 90 -n 4 -f /usr/share/speedtouch/firmware.ZZZLP1.eni -a /usr/share/speedtouch/boot.ZZZLP2.eni -v 1 display nice informations -n 4 is enough attempt to load firmware -t 90 avoid to wait to much if you ADSL is brocken, you reboot and your connection start automaticaly at boot. If you use the kernel driver, you need to : - modprobe speedtch - run modem_run with adding -k to other options - sleep 5 I am not usin hotplug, so I don't know to much how it should work. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
