[speedtouch] FC2 silver modem
Hi everybody, I'm a newcomer to this list and to both Linux and usb modems, although I have been an unix user since many years on an intranet network. I'd like to get my silver speedtouch 330 modem work on Fedora Core 2. In the mailing list archive I see two solutions, one by Frederic Ruaudel and the other by Aad Rijnberg. My inexperience doesn't allow me to tell the difference. Moreover, as my subscription is very recent, I can't have access to the Duncan's patches indicated by Aad Rijnberg; in the archive they result protected. My ISP uses PPPoA and PPPoverATM. I'd appreciate your advice about how to proceed. Thanks, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] R: Re: FC2 silver modem
Fred, I have installed your files. Yet check_adsl.sh gives the message : Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable 8.35 is the right vpi.vci here, in speedtch I have simply added my ADSL username. I have noticed that the eth0 device,which I found already configured after the FC2 installation, can't be activated; I wonder whether this is a part of the same problem. Regards, Maurizio Rosetti -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di RUAUDEL Frédéric Inviato: giovedì 3 giugno 2004 9.11 A: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Oggetto: [speedtouch] Re: FC2 silver modem The easiest is my solution because it only consist of doing rpm -[iU]vh blabla and set your account information. And it should work without problem. But if you want to understand all the process or if my solution doesn't work, you can do it manually as Aad explained, but it's a long and time consuming task ;o) I remember the address of my RPMS : http://grumz.dyndns.org/ADSL_FC2/ be carefully to not upgrade the kernel. For all package you can install them with rpm -Uvh, but for the kernel use rpm -ivh to avoid removing the old working one in case mine will not work. If you want the patches, I remember their url to you : http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a3f5KlccssYr19NecU0kkO1 N6g?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a40f3cg3ZSEt1EnA8VSuVQi qUw?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a440FSnf2li3HyKVGxT6N27 eZw?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a45aD7_IpRHlvUZN-pVfL3s COA?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a4723YKm1lsWMJiMcgsDihj Q4g?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a48f-sHxeV98SkZrgyNs2vZ ywA?nav=index.html|ChangeSet__AT__-4w *Don't forget* to replace __AT__ by the at sign @ Best Regards, Fred Maurizio Rosetti wrote: Hi everybody, I'm a newcomer to this list and to both Linux and usb modems, although I have been an unix user since many years on an intranet network. I'd like to get my silver speedtouch 330 modem work on Fedora Core 2. In the mailing list archive I see two solutions, one by Frederic Ruaudel and the other by Aad Rijnberg. My inexperience doesn't allow me to tell the difference. Moreover, as my subscription is very recent, I can't have access to the Duncan's patches indicated by Aad Rijnberg; in the archive they result protected. My ISP uses PPPoA and PPPoverATM. I'd appreciate your advice about how to proceed. Thanks, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: FC2 silver modem
I tried to substitute (rather blindly) firmware.bin with ZZZLP2.eni (Rev.4) and with KQD6P2.eni (Rev. 0 and 2) but the connection still doesn't work and check_adsl.sh writes the same message. Regards, Maurizio Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: FC2 silver modem
I recall the message that I get using the Frederic Ruaudel files: Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable I'd like to know whether what suggested by Duncan Sands in his e-mail of 21 May Re:redhat9 and silver speedtouch300 could work in my case as well (I have a silver modem, differently from Frederic) and how to get the CVS version of the user space driver, as I don't have the cvs password. I would also be grateful for some instructions about how to insert this driver into what has been installed by the Frederic's rpm files. Thanks, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: FC2 silver modem
Hi Fred, I used service adsl start,then, as the connection wasn't working, I did a check with check_adsl.sh. I kept the modem plugged during the whole installation process; I don't know whether this can matter. Regards, Maurizio il Mon, 07 Jun 2004 09:27:49 +0200 RUAUDEL Frédéric [EMAIL PROTECTED] ha scritto: Do you really use check_adsl.sh again or it is a mistake in your message and you would like to say start_adsl.sh ? Please use : service adsl start and give us your feedback again. Regards, Fred Maurizio Rosetti wrote: I tried to substitute (rather blindly) firmware.bin with ZZZLP2.eni (Rev.4) and with KQD6P2.eni (Rev. 0 and 2) but the connection still doesn't work and check_adsl.sh writes the same message. Regards, Maurizio Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] References
Hello everybody, can anyone give me some references (web pages, books etc.) about the technical background of the main issues treated in the speedtouch mailing list? Thanks in advance, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] R: Re: R: Re: R: FC2 Silver modem
Yes, I am. I've also tried to disinstall them and to install them again. I use service adsl start ; the modem lights don't blink, the connection is absent, and check_adsl.sh reports that the firmware doesn't get loaded (as Duncan Sands explained). MR -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di hicham Inviato: giovedì 17 giugno 2004 12.25 A: [EMAIL PROTECTED] Oggetto: [speedtouch] Re: R: Re: R: FC2 Silver modem are you using these packages in http://grumz.dyndns.org/ADSL_FC2/ ? Maurizio Rosetti wrote: Very stange indeed. I had modified /etc/ppp/peers/speedtch and copied ZZZLPboth.eni to firmware.bin; the error is that the firmware doesn't get loaded into the modem. MR -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di hicham Inviato: giovedì 17 giugno 2004 11.59 A: [EMAIL PROTECTED] Oggetto: [speedtouch] Re: R: FC2 Silver modem Hello, I don't understand why the same solution doesn't work for me. Hicham, have you copied (or renamed) ZZZLPboth.eni to firmware.bin ? yes copy ZZZLPboth.eni to firmware.bin just make sure that /etc/ppp/peers/speedtch is modified rather than /etc/ppp/peers/adsl Thanks Maurizio -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di hicham Inviato: lunedì 7 giugno 2004 19.04 A: [EMAIL PROTECTED] Oggetto: [speedtouch] FC2 Silver modem Hello everybody, I went thru the mail archives and read the thread FC2 silver modem I've tried the Frederic Ruaudel solution, installed the kernel rpm and updated the others but used the combined firmware for silver speedtouch ZZZLPboth.eni from http://www.hystedjp.pwp.blueyonder.co.uk/; the firmware loaded fine , only I get disconnected when I run pppd Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] R: Re: R: FC2 Silver modem
Very stange indeed. I had modified /etc/ppp/peers/speedtch and copied ZZZLPboth.eni to firmware.bin; the error is that the firmware doesn't get loaded into the modem. MR -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di hicham Inviato: giovedì 17 giugno 2004 11.59 A: [EMAIL PROTECTED] Oggetto: [speedtouch] Re: R: FC2 Silver modem Hello, I don't understand why the same solution doesn't work for me. Hicham, have you copied (or renamed) ZZZLPboth.eni to firmware.bin ? yes copy ZZZLPboth.eni to firmware.bin just make sure that /etc/ppp/peers/speedtch is modified rather than /etc/ppp/peers/adsl Thanks Maurizio -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di hicham Inviato: lunedì 7 giugno 2004 19.04 A: [EMAIL PROTECTED] Oggetto: [speedtouch] FC2 Silver modem Hello everybody, I went thru the mail archives and read the thread FC2 silver modem I've tried the Frederic Ruaudel solution, installed the kernel rpm and updated the others but used the combined firmware for silver speedtouch ZZZLPboth.eni from http://www.hystedjp.pwp.blueyonder.co.uk/; the firmware loaded fine , only I get disconnected when I run pppd Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] R: Re: R: Re: R: FC2 Silver modem
In the computer that I have here at work (LAN network) which is the twin of the one I have at home the line is missing. Maybe this is the explanation. I'll check when I get home. Thank you very much, Maurizio -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di Andrew Benton Inviato: giovedì 17 giugno 2004 13.21 A: [EMAIL PROTECTED] Oggetto: [speedtouch] Re: R: Re: R: FC2 Silver modem Maurizio Rosetti wrote: Very stange indeed. I had modified /etc/ppp/peers/speedtch and copied ZZZLPboth.eni to firmware.bin; the error is that the firmware doesn't get loaded into the modem. MR Do you have usbfs /proc/bus/usb usbfs defaults 0 0 in /etc/fstab ? modem_run can't load the firmware if the USB isn't mounted Yours, Andrew Benton Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] R: Re: R: Re: R: FC2 Silver modem
Hello Andrew and all, Do you have usbfs /proc/bus/usb usbfs defaults 0 0 in /etc/fstab ? modem_run can't load the firmware if the USB isn't mounted Yours, Andrew Benton I've added the line to /etc/fstab, rebooted, yet the firmware still doesn't get loaded. I've also noticed that check_adsl.sh gives the same message before and after the command service adsl start : Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable Regards, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: FC2 silver modem (it works!)
Hello, at last my Silver Speedtouch 330 Rev. 4.0 works !!! This after installing the new speedtouch rpm file of Frederic Ruaudel and using ZZZLboth.eni as firmware. (using ping I see that I lose some packets, perhaps it's normal) Thanks to Frederic and the others who helped. At this point I think that it is superflous that I post what asked by Duncan. Regards, Maurizio Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] display from a remote computer
Hello everibody, I'm trying to display on my home computer some graphics from the computer that I have at work. I execute xhost + before using ssh to connect to the remote computer, and then there I set DISPLAY according to the IP address that I have derived on the local machine using ifconfig. I take the address labelled with inet addr. Yet when I launch on the remote computer an X application, I get the error: can't open display ... Can anyone give me a hint to fix the problem ? Thanks, Maurizio Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
