[speedtouch] Re: RES: Re: RES: Re: RES: Re: speedtouch and FC4
Hi Herva, Maybe you could give a try to gnome-ppx at http://gnome-ppx.berlios.de/download/. This is a GUI frontend to speedtouch that worked well with FC2 and if I remember correctly take care of all the configuration steps. But I don't know if this software works with FC4 because it was done for FC2 You can also try to see if there is any interesting clues in this old FC2 page : http://s1x.homelinux.net/documents/fc2_speedtouch Don't get the RPMs because there are too old but the instructions could be interresting and sometime we just miss a little thing that make everything else just doesn't work! Regards, Fred PS: If you need I can send you a RPMs of the speedtouch package for FC4 (I'm not sure if you already have one). If anyone want to host this package feel free to contact me (I don't have enough bandwith to do it myself). Hervandil Sant'Anna wrote: >Dear Duncan, > >Thank you for your further help, but I think I gonna >give up with this! I have any familiarity with these >stuffs like Kernel compilation, system logs, etc. >As you said, it's getting to hard for me. >If one day I have enough money, I'll follow other >simpler suggestions, which recommended to buy an >ethernet modem. > >I'm sorry, but I think I can't go on! >Best regards, >Herva > > > >--- Duncan Sands <[EMAIL PROTECTED]> escreveu: > > > >>Hi Herva, >> >> >> >>>I have just done the step one, because the "ADSL >>> >>> >>line is up" was not >> >> >>>anywhere in /var/log/messages. >>> >>> >>is your telephone line plugged into the modem? Did >>your ISP turn on >>their equipment down at the exchange? >> >> >> >>>However, the messages: >>> found stage 1 firmware speedtch-1.bin >>> found stage 2 firmware speedtch-2.bin >>>were there, after the message "New full speed usb >>> >>> >>device using ohci_hcd >> >> >>>address 4" >>> >>> >>Please send me your system logs. It would be >>helpful if you rebuilt your >>kernel with CONFIG_USB_DEBUG=y, but I understand >>that that may be too hard. >> >>Ciao, >> >>D. >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : >> >> >> >mailto:[EMAIL PROTECTED] > > >> >> >> >> > > > > > > >___ >Yahoo! Acesso Grátis - Internet rápida e grátis. >Instale o discador agora! http://br.acesso.yahoo.com/ > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: speedtouch and FC4
you copy the content text between the dash line (-8<-) in a file name for example fix.patch, then you go in the root dir of the source and you use the command : patch -p1 < /path/to/fix.patch that's it. Or more simply, you can edit the file speedtouch-1.3/src/modem_run.c and remove the word "static" near line 91. I don't know if the official speedtouch dev team agree with this patch but my modem_run program works well for 2 weeks now with this patch applied... Regards, Fred Richard Connon wrote: >I understand I am going back a while in the discussion but how exactly >would I go about applying 'this patch' to the source? > >RUAUDEL Frédéric wrote: > > > >>Hello hicham, >> >>You need to apply this patch to the source : >> >>8<--- cut here 8<--- >>diff -ru speedtouch-1.3/src/modem_run.c speedtouch-1.3.new/src/modem_run.c >>--- speedtouch-1.3/src/modem_run.c 2004-06-10 18:36:35.0 +0200 >>+++ speedtouch-1.3.new/src/modem_run.c 2005-06-13 23:26:38.0 +0200 >>@@ -91,7 +91,7 @@ >>* Global variables >>**/ >> >> >> >> >>-static int verbose = 0; >>+int verbose = 0; >>FILE *flog = NULL; >> >> >> >> >>/* >>8<--- cut here 8<--- >> >>hicham wrote: >> >> >> >> >> >>>Hello >>>I've tried the speedtouchconf script ( the 6 mars 05 version and the >>>betas versions as well ) in Fedora core 4 >>>I get the following error : >>>cd src && make >>>make[1]: Entering directory >>>`/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' >>>gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\"1.3\" >>>-c firmware.c >>>gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\"1.3\" >>>-D_REENTRANT -D_THREAD_SAFE -o pusb.o -c pusb-linux.c >>>gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DUSE_SYSLOG >>>-DVERSION=\"1.3\" -c modem_run.c >>>modem_run.c:84: error: static declaration of ‘verbose’ follows >>>non-static declaration >>>modem.h:42: error: previous declaration of ‘verbose’ was here >>>modem_run.c: In function ‘get_reference’: >>>modem_run.c:691: warning: pointer targets in passing argument 6 of >>>‘pusb_control_msg’ differ in signedness >>>modem_run.c: In function ‘report’: >>>modem_run.c:1119: warning: pointer targets in passing argument 1 of >>>‘dump’ differ in signedness >>>modem_run.c: In function ‘dump’: >>>modem_run.c:1180: warning: pointer targets in passing argument 1 of >>>‘sprintf’ differ in signedness >>>modem_run.c:1189: warning: pointer targets in passing argument 1 of >>>‘sprintf’ differ in signedness >>>modem_run.c:1198: warning: pointer targets in passing argument 1 of >>>‘sprintf’ differ in signedness >>>modem_run.c:1207: warning: pointer targets in passing argument 2 of >>>‘syslog’ differ in signedness >>>make[1]: *** [modem_run.o] Error 1 >>>make[1]: Leaving directory >>>`/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' >>>make: *** [modem] Error 2 >>> >>>Thanks for your help >>> >>>hicham >>> >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se désinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >>> >>> >>> >>> >>> >>-- Binary/unsupported file stripped by Listar -- >>-- Type: text/x-vcard >>-- File: ruaudel.vcf >> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se désinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> >> >> >> > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: speedtouch and FC4
Hello hicham, You need to apply this patch to the source : 8<--- cut here 8<--- diff -ru speedtouch-1.3/src/modem_run.c speedtouch-1.3.new/src/modem_run.c --- speedtouch-1.3/src/modem_run.c 2004-06-10 18:36:35.0 +0200 +++ speedtouch-1.3.new/src/modem_run.c 2005-06-13 23:26:38.0 +0200 @@ -91,7 +91,7 @@ * Global variables **/ -static int verbose = 0; +int verbose = 0; FILE *flog = NULL; /* 8<--- cut here 8<--- hicham wrote: >Hello >I've tried the speedtouchconf script ( the 6 mars 05 version and the >betas versions as well ) in Fedora core 4 >I get the following error : >cd src && make >make[1]: Entering directory >`/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' >gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\"1.3\" >-c firmware.c >gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\"1.3\" >-D_REENTRANT -D_THREAD_SAFE -o pusb.o -c pusb-linux.c >gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DUSE_SYSLOG >-DVERSION=\"1.3\" -c modem_run.c >modem_run.c:84: error: static declaration of ‘verbose’ follows >non-static declaration >modem.h:42: error: previous declaration of ‘verbose’ was here >modem_run.c: In function ‘get_reference’: >modem_run.c:691: warning: pointer targets in passing argument 6 of >‘pusb_control_msg’ differ in signedness >modem_run.c: In function ‘report’: >modem_run.c:1119: warning: pointer targets in passing argument 1 of >‘dump’ differ in signedness >modem_run.c: In function ‘dump’: >modem_run.c:1180: warning: pointer targets in passing argument 1 of >‘sprintf’ differ in signedness >modem_run.c:1189: warning: pointer targets in passing argument 1 of >‘sprintf’ differ in signedness >modem_run.c:1198: warning: pointer targets in passing argument 1 of >‘sprintf’ differ in signedness >modem_run.c:1207: warning: pointer targets in passing argument 2 of >‘syslog’ differ in signedness >make[1]: *** [modem_run.o] Error 1 >make[1]: Leaving directory >`/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' >make: *** [modem] Error 2 > >Thanks for your help > >hicham > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : mailto:[EMAIL PROTECTED] > > > > > -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Announcement: GNOME PPX
Hi tiago, Finally, I had time last night to test your gnome-ppx app. Unfortunately, it didn't work. Here are the errors pppd send to the system logs : -- Aug 12 23:46:12 grumz pppd[16370]: Plugin passprompt.so loaded. Aug 12 23:46:12 grumz pppd[16370]: unrecognized option '8.35' -- then I have this error dialog message : -- Error trying to start connection. -- It seems that you don't use the vci.vpi parameter correctly with pppoa. After setting it in the dialog, I didn't see it in the peer file. Tell me if I'm wrong, but it seems to me that it should go on a blank line at the end of the peer file (/etc/ppp/peer/pppoa). lcp-echo-interval 10 user "username" [...] usepeerdns plugin pppoatm.so 8.35 - Sorry, but I didn't have time to look in the code to find where the problem could come from exactly. I will try to find the time to do it. Tell me when you will have a new version. Have a nice day, Fred Tiago Cogumbreiro wrote: >Thank you very much, it will be included in the next version of >gnome-ppx, it will probably be released tonight. > > >On Thu, 2004-08-12 at 11:31, RUAUDEL FrÃdÃric wrote: > > >>Yes I saw your rpms. >> >>To preserve config file with rpms, you must set them with the >>%config(noreplace) directive in the %files section : >> >>%config(noreplace) /etc/ppp/peers/pppoa >> >>With this directive, if the file already exists, the new file is >>installed as for example /etc/ppp/peers/pppoa.rpmnew >> >>Regards, >> >>Fred >> >>Tiago Cogumbreiro wrote: >> >> >> >>>I have rpms and src.rpms in my website so you don't need to package this >>>one :) >>> >>>The installation will replace /etc/ppp/peers/pppoa so please backup your >>>account file if it's the same name. I don't really know how to make rpm >>>create a backup with this type of files. >>> >>>Note: Currently the pppoa dialer only works with the pppoatm.so plugin. >>> >>>Thank you for your time. >>> >>>On Thu, 2004-08-12 at 07:28, RUAUDEL FrÃdÃric wrote: >>> >>> >>> >>> I will try to find the time to test it as soon as possible for PPPoA support. I will keep you inform. If it works well, maybe I will add the rpms to my repository. Have a nice day Fred Tiago Cogumbreiro wrote: >I would also like to add the I am in a great need for beta testers, >especially for pppoa users. I have a pppoe connection and it works >flawlessly but as for pppoa i only did what was written in the docs. >Please help me out :) > >Thank you all, > >Tiago >On Wed, 2004-08-11 at 18:06, Tiago Cogumbreiro wrote: > > > > > > >>To whom it may concern ;) >> >>I have created an easy to use frontend to pppd and PPPoE/PPPoA >>connections. The project name is gnome-ppx and it's website is: >> >>http://s1x.homelinux.net/projects/gnome-ppx >> >>Take care, >> >>Tiago Cogumbreiro >> >> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se dsinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> >> >> >> >> >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se dÃsinscrire : mailto:[EMAIL PROTECTED] > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dÃsinscrire : mailto:[EMAIL PROTECTED] >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>> >>> >>> >>> >>> >>> >>> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se dsinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> > > >Liste de diffusion modem ALCATEL SpeedTouch USB > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Announcement: GNOME PPX
Yes I saw your rpms. To preserve config file with rpms, you must set them with the %config(noreplace) directive in the %files section : %config(noreplace) /etc/ppp/peers/pppoa With this directive, if the file already exists, the new file is installed as for example /etc/ppp/peers/pppoa.rpmnew Regards, Fred Tiago Cogumbreiro wrote: >I have rpms and src.rpms in my website so you don't need to package this >one :) > >The installation will replace /etc/ppp/peers/pppoa so please backup your >account file if it's the same name. I don't really know how to make rpm >create a backup with this type of files. > >Note: Currently the pppoa dialer only works with the pppoatm.so plugin. > >Thank you for your time. > >On Thu, 2004-08-12 at 07:28, RUAUDEL FrÃdÃric wrote: > > >>I will try to find the time to test it as soon as possible for PPPoA >>support. I will keep you inform. >> >>If it works well, maybe I will add the rpms to my repository. >> >>Have a nice day >> >>Fred >> >>Tiago Cogumbreiro wrote: >> >> >> >>>I would also like to add the I am in a great need for beta testers, >>>especially for pppoa users. I have a pppoe connection and it works >>>flawlessly but as for pppoa i only did what was written in the docs. >>>Please help me out :) >>> >>>Thank you all, >>> >>>Tiago >>>On Wed, 2004-08-11 at 18:06, Tiago Cogumbreiro wrote: >>> >>> >>> >>> To whom it may concern ;) I have created an easy to use frontend to pppd and PPPoE/PPPoA connections. The project name is gnome-ppx and it's website is: http://s1x.homelinux.net/projects/gnome-ppx Take care, Tiago Cogumbreiro Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] >>>Liste de diffusion modem ALCATEL SpeedTouch USB >>>Pour se dÃsinscrire : mailto:[EMAIL PROTECTED] >>> >>> >>> >>> >>> >>> >>> >>Liste de diffusion modem ALCATEL SpeedTouch USB >>Pour se dÃsinscrire : mailto:[EMAIL PROTECTED] >> >> >> >> > > >Liste de diffusion modem ALCATEL SpeedTouch USB > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]